PS-3207 wireless exercise heart-rate sensor
The PS-3207 wireless exercise heart-rate sensor is designed for teaching. It can continuously monitor heart rate during exercise or measure initial and final heart rates, providing fast, reliable detection. Cardiac signals used to obtain heart-rate data are transmitted wirelessly to the sensor. The wireless exercise heart-rate sensor includes a chest strap and has a wireless transmission range of up to 10 meters. Wear the electrode strap around the chest; direct skin contact is recommended for best results. If worn over clothing, place a drop of saline beneath the electrodes. For teaching use only: This product is not a medical device. PASCO products are designed solely for teaching and must not be used in equipment involving life support, medical testing, patient diagnosis, or industrial control/testing systems.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Weight of the chest strap and connector | Approximately 40 grams |
| Sensor measurement range | 0-240 beats/minute (bpm) |
| Accuracy | ±1 beat/minute (bpm) |
| Default sampling rate | One reading every 5 seconds |
| Maximum Sampling Rate | One reading every 2 seconds |
| Data Logging Function | None |
| Battery Type | Button cell |
| Stored-data-point memory (data logging) ¹ [Refers to the Minimum Number of Data Points When All Measurement Functions Are Enabled; Actual Results Depend on the Enabled Measurement Functions.] | Not Supported |
| Battery - Connected state (data-acquisition mode) ² | Battery life >400 hours (equivalent to 3 years of normal classroom use)* |
| Battery - Data-logging state (data-logging mode) ³ [Refers to Recording Data Until the Battery Is Exhausted; Actual Results Depend on the Sampling Rate, Activated Measurement Functions, and Battery Condition.] | Not Supported |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
PS-2011 dual-channel Bluetooth interface Sensors Brolight
Interface Type: USB or Bluetooth 2.0 Interface: 4 (2 PASPORT interfaces, 1 voltage interface, 1 temperature interface)
The PS-2011 SPARKlink dual-channel Bluetooth interface lets teachers and students connect their devices by USB or Bluetooth to any of more than 70 PASPORT sensors in the PASCO range. Data are acquired with SPARKvue or PASCO Capstone. Teachers and students can use desktop or laptop computers running either program, or Bluetooth-enabled iOS or Android devices running the SPARKvue app. Note: SPARKlink Air connects to Google Chromebooks by USB but does not support Bluetooth connection to them.
-
Gas mass flow controllers-3660 series Sensors Csl-vacuum
Flow-rate range [Different flow units at the two ends retained as in the source, without conversion]: 10SCCM~100SLM Gas/fluid: N2, AIR, H2, HE, AR, O2, CO2, etc. Electrical connection: Dsub 9-pin
An internal sensor measures gas flow in real time and compares it with the setpoint. The controller rapidly actuates a regulating valve, forming a closed loop that stabilizes actual flow precisely at the target.
-
Gas mass flow controllers FC-R7700CD series Sensors Csl-vacuum
Flow-rate range [Different flow units at the two ends retained as in the source, without conversion]: 10SCCM~200SLM Gas/fluid: N2, AIR, H2, HE, AR, O2, CO2, etc. Electrical connection: Dsub 9-pin
An internal sensor measures gas flow in real time and compares it with the setpoint. The controller rapidly actuates a regulating valve, forming a closed loop that stabilizes actual flow precisely at the target.
-
Fully integrated 4-channel DVS optical module Sensors Oe-photonics
Sensing distance: typical:20 km Number of detection channels: 4 channels Modulation mode: External modulation
For multichannel, fully integrated distributed vibration sensing (DVS), the DVS-AOM-L series uses an ultra-narrow-linewidth laser with optimized optomechanical/electrical integration. Serial-port parameter configuration, high integration, environmental-interference resistance, compact size, and convenience are provided. Sharing a narrow-linewidth laser reduces multichannel costs, particularly for demanding sensing applications. Custom solutions and specifications are available to sensor-equipment manufacturers.
-
Ceramic pressure sensor Sensors Cctc
Ceramic parts for pressure sensors.
Related Articles
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
Loading...
Name
Phone
Organization
Use Case
Database Platform