CMR-5000
1. A measurement-machine control system based on an advanced MCU+FPGA design, with peripheral control signals fully isolated from the MCU+FPGA and multiple additional functions; 2. Integrates grating-scale/encoder counting, motor control, probe-head/probe latching, illumination control, and I/O control, communicates with a PC through a network cable, and supports both 32-bit and 64-bit operating systems; 3. Provides a One Box solution for image-measuring instrument electrical control, significantly reducing system complexity, high cost, low performance, and high failure rates.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Power Supply | 24VDC±5%@2A |
| Communication | Network port/TCP |
| Number of driven axes [Motor drive] | 6 axes |
| Drive Method [Motor drive] | Pulse + direction signals |
| Maximum pulse-output frequency [Motor drive] | 4 MHz |
| Number of counting axes [Grating-scale counting] | 4 axes |
| Interface definitions [Grating-scale counting] | RS422 |
| Power-output capability [Grating-scale counting] | 5.0~5.15V@0~150mA |
| Input Frequency [Grating-scale counting] | <6 MHZ |
| Surface Illumination [Light-source control] | 8 zones or external connection 6045 |
| Bottom illumination [Light-source control; Original bottom illumination *2] | 1000mA@5V/12V/24V |
| Coaxial Illumination [Light-source control; Original coaxial illumination *1] | 1000mA@5V/12V/24V |
| Software brightness adjustment range [Light-source control] | 200 levels (brightness levels 1~16) |
| Probe head/probe [With LED; trailing source character shu (transmit), without a completed input/output term] | Hardware latch |
| Input interface [I/O control; Optocoupler isolation] | 8 general-purpose inputs |
| Output Interface [I/O control; Optocoupler isolation] | 8 general-purpose outputs |
| Operating Conditions | -10~50℃, noncondensing, no oil contamination |
| Housing Dimensions | 300 mm × 200 mm × 50 mm |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
CMR-2000 Optical Inspection Pomeas
Power Supply: 24VDC±5%@2A Communication: RS-232 (USB conversion) Communication settings: 921600,N,8,1
The CMR-2000 semiautomatic instant-measurement instrument controller is a three-axis encoder counter based on advanced MCU counting, with multiple additional functions. It is a dedicated controller for POMEAS Precision Instruments products such as manual image measuring instruments and manual coordinate measuring machines. The POMEAS CMR-2000 integrates grating-scale/encoder counting, probe-head/probe latching, illumination control, I/O control, and detented-lens functions. It communicates with a PC through USB cables and a network port and supports both 32-bit and 64-bit operating systems. Its One Box solution for manual image-measuring instrument electrical control significantly reduces system complexity, high cost, low performance, and high failure rates.
-
Satellite laser communications inspection equipment (source designation 200)
Optical Inspection
Intaneoptics
Clear Aperture: Φ200 Focal Length: 2000 mm System Accuracy RMS [λ=632.8nm]: Better Than λ/20
-
Equivalent far-field simulation test system for satellite laser communications
Optical Inspection
Intaneoptics
Measurement Range [Signal-transmit beam-divergence test]: 10–300 μrad Test error [Signal-transmit beam-divergence test; Original ≤± expression retained]: ≤±1 Measurement Range [Beacon-transmit beam-divergence test]: 10–1200 μrad
-
Folded collimator series
Optical Inspection
Intaneoptics
Structural configuration [Parameter image 1; General specifications]: Folded Clear Aperture Dimension [General specifications]: Φ50–1500 Operating Wavelength Band [General specifications]: Mostly visible wavelengths or a single near-infrared wavelength
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform