Fast Tool Servo QK-PZT-40*
Fast Tool Servo is Face Free Curve 、 Process technologies for super-precision rapid manufacture, such as surface micronarcing structures ， Quick-Sword Ho. Drive Swords are high frequency. 、 The small-value axis is moving fast to motion. , and High Precision Coordinates Spindle Rotation with Radial Feed ， One processing allows for complex microstructure surfaces with high-precision surfaces. 。
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Freedom of movement | X |
| Travel | 40 μm |
| Sensor Type | Capable Sensors |
| Closed circle resolution | 0.35 nm |
| Closed Repeatability | 0.01％ |
| Closed ring linearity | 0.03％ |
| Airborne tuned frequency | 4 KHz |
| Motion Directions Rigid | 16 N/μm |
| Axis-output | 1000 N |
| Material | Titanium Alloy / Steel |
| Overall Dimensions （ Long / Kwang / High ） | 150 mm × 106.5 mm × 100 mm |
| Fit Controller | Digital Servo Controller NPC-031/ Nano. Servo Controller APS-2030101 |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Internal-Parameter Calibration Equipment
Optical Production Equipment
Huayazhuhai
Overall dimensions: L1600mmx W1200mm x H1800mm Working Surface Height [±50mm]: 950mm±50mm Chart Dimensions: 800mmx1200mm
Huaya's intrinsic-parameter calibration equipment was among the first domestically mass-produced systems and has been recognized by several leading automotive camera module manufacturers. As ADAS adoption increases, this equipment has become essential to ADAS camera manufacturing. It calibrates and tests COD/PP/EFL (focal length ratio), radial distortion K1-K6 and tangential distortion P1-P2.
-
Dual-Track AA Equipment (ADAS Camera AA)
Optical Production Equipment
Huayazhuhai
Voltage: 220v16A Gas pressure: 0.4~0.7Mpa Industrial computer: IPC+Win7
Huaya Intelligent's dual-track AA equipment is one of its most mature and representative products, developed for AD AS cameras and ultrahigh-definition 800W camera modules. Traditional AA equipment uses either the Sensor or Lens as a reference and aligns the other while maintaining equipment precision. Previous processes can cause the reference part to differ substantially from the system optical axis. Higher pixel counts, especially the longer EFL of ADAS cameras, make differences between theoretical and actual axes more critical. The dual-adjustment-stage system uses high-precision coordinated adjustment to establish the optimum Sensor plane and correct the Lens for best image sharpness and optical axis. Parallel dual tracks improve both alignment precision and speed, with particular advantages for automotive ADAS modules.
-
Semiconductor Laser Processing System DLS-01 Series
Optical Production Equipment
Bellinlaser
Wavelength: NIR(9xx nm typical) Output Power: 10kW-100kW Operating Mode: CW
-
TFC-600 Large-Diameter Fiber Cleaver
Optical Production Equipment
Jxcmc
I. Features: 1. Cleaves fibers with cladding diameters from 125μm to 600μm. 2. A sharp, durable American diamond blade is easy to replace/adjust. Each point makes over 3000 cleaves under normal use, depending on cladding material; theoretically 10 positions per blade are available. 3. Tension-and-scribe cleaving produces flat, low-angle faces, averaging <0.5°. Imported motors and precision guides control tension to 0.01kgf for repeatable, consistent cleaves. 4. Removable fiber holders provide accurate location/clamping, with matching holders for different core diameters and easy replacement. 5. A handheld 3.5-inch HD touchscreen editor clearly displays an intuitive interface for editing/storing TFC-600 parameters and selecting stored programs for different fibers.
Related Articles
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Loading...
Name
Phone
Organization
Use Case
Database Platform