QBU Series Pockels Cell Driver Board
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Repetition Rate ，kHz(*) [Output Voltage ，kV=2.00] | 90-110 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=3.00] | 50-60 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=4.00] | 28-38 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=4.00] | 40-60 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=5.00] | 18-26 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=5.00] | 30-40 kHz |
| Input Voltage | +24V DC |
| Working Mode | External low voltage repetition |
| Working Mode | Input TTL Repeated signal. |
| Output Voltage ， High level of electrons | Up to 6kV¹ |
| Output Voltage ， High level of electrons | Adjustable ，Up to 3.5kV¹ |
| Output Voltage ， High level of electrons | Adjustable ，4-10kV |
| Output Voltage ， Low level of electricity | Fixed, 0V |
| Output Pulse Width | 200ns-DC |
| Repetition Rate | Up to 50kHz(CW),up to 100kHz(burst mode)^(1,2) |
| Repetition Rate | Up to 30kHz(CW),up to 50kHz(burst mode)^(1,2) |
| Up the line. ( Falling Along ) | <15ns( Typical About 10ns)³ |
| Up the line. ( Falling Along ) | <20ns/<25ns¹ |
| Dither | 10ns(1ns in LJ-modification) |
| Dither | Typical ~2ns |
| Dither | ~1.5ns |
| Delay | 1us(100ns in LJ-modification) |
| Delay | Typical ~150ns |
| Delay | ~150ns |
| Load Capacitance | Up to 0.5nF¹ |
| Operating Temperature | +10-40℃( More on request. Operating Temperature Scope ) |
| Operating Temperature | +10-40℃ |
| Storage Temperature | -20-60℃ |
| Air humidity | 90%， None Condensed |
| Dimensions ( Long x Kwang x High ) | 130 mm × 80 mm × 25 mm |
| Dimensions ( Long x Kwang x High ) | 140 mm × 50 mm × 20 mm |
| Dimensions ( Long x Kwang x High ) | 132 mm × 105 mm × 50 mm |
| Weight | 0.1kg |
| Weight | <0.1kg |
| Weight | <0.2kg |
| Up the line. ( Falling Along ) | < Typical About 10ns³ |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=6.00] | 20-30 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=7.00] | 15-25 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=8.00] | 12-18 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=9.00] | 10-14 kHz |
| Repetition Rate ，kHz(*) [Output Voltage ，kV=10.00] | 7-11 kHz |
| Maximum Repetition Rate | >5kHz at full load(10kV,11pF) |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
RF Amplifier Modulator Drivers STOL-MD-9-M Optical Modulator Drivers Sinteclaser
Bandwidth: 3至9 GHz S11 Characteristics: -15 dB RF Gain: 34 dB
Our high-gain RF amplifier modules provide cost-effective solutions for microwave and analog links. Compact and easy to use, the module delivers a high-quality single-ended voltage to drive optical modulators. This versatile module uses a 12V or 5V DC power supply and has an anodized housing. Its precision-machined aluminum housing dissipates heat effectively during prolonged use. Most modulators have a manually adjustable DC bias output voltage port to further improve efficiency when used with standard optical modulators.
-
RF Amplifier Modulator Drivers STOL-MD-50E-M Optical Modulator Drivers Sinteclaser
Bandwidth: 45 GHz S11 Characteristics: -10 dB Data Rate: 50 Gb/s
Our high-gain RF amplifier modules provide cost-effective solutions for microwave and analog links. Compact and easy to use, the module delivers a high-quality single-ended voltage to drive optical modulators. This versatile module uses a 12V or 5V DC power supply and has an anodized housing. Its precision-machined aluminum housing dissipates heat effectively during prolonged use. Most modulators have a manually adjustable DC bias output voltage port to further improve efficiency when used with standard optical modulators.
-
RF Amplifier Modulator Drivers STOL-MD-20-M Optical Modulator Drivers Sinteclaser
Bandwidth: 18 GHz S11 Characteristics: -10 dB Data Rate: 23 Gb/s
Our high-gain RF amplifier modules provide cost-effective solutions for microwave and analog links. Compact and easy to use, the module delivers a high-quality single-ended voltage to drive optical modulators. This versatile module uses a 12V or 5V DC power supply and has an anodized housing. Its precision-machined aluminum housing dissipates heat effectively during prolonged use. Most modulators have a manually adjustable DC bias output voltage port to further improve efficiency when used with standard optical modulators.
-
RF Amplifier Modulator Drivers STOL-MD-12-DC Optical Modulator Drivers Sinteclaser
Bandwidth: 12 GHz S11 Characteristics: -10 dB Data Rate: 12.5 Gb/s
Our high-gain RF amplifier modules provide cost-effective solutions for microwave and analog links. Compact and easy to use, the module delivers a high-quality single-ended voltage to drive optical modulators. This versatile module uses a 12V or 5V DC power supply and has an anodized housing. Its precision-machined aluminum housing dissipates heat effectively during prolonged use. Most modulators have a manually adjustable DC bias output voltage port to further improve efficiency when used with standard optical modulators.
-
8×100G Linear MZM Driver
Optical Modulator Drivers
Xy-technology
XY52A4M is A high-performance piece. 8 Channel differential input / Discretion output linear modem Driver ， For 53G Portrate Application 。 The chip has a high-level 18dB Gains ，15dB Dynamic Scope ， Maximum Output voltage is as 3VPPD。 It supports the Alto. 8dB Balance gain available LPO Apply 。 The chip is provided in the form of a nudist chip. 。
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform