PM2.5 Test
PM2.5 is means air with less than or equal to the diameter of the atmosphere 2.5 Micro-slave suspended particles 。 These particles are mainly from industrial emissions. 、 Car tail. 、 Natural factors such as combustion processes such as coal and wood combustion and sand and dust storms 。 Because PM2.5 The particles have a smaller diameter and a larger surface area. ， It's capable of carrying all kinds of toxic substances. ， It's a high risk to human health. 。 is. PM2.5 Testing ， There are some issues that should be noted. 。 First of all ， It is important to select the appropriate detection equipment and methods. 。 There's a lot of stuff on the market right now. PM2.5 Testing instruments ， Including portable detection devices 、 Fixed monitoring stations, etc. 。 When selecting the device ， It needs to be considered for accuracy. 、 Stability 、 The scope of the tests, and so on. ， Ensure accurate and reliable results 。 Second ， You need to be careful about the selection of the sampling sites during testing. 。 The location and environment of the sampling sites have a significant impact on the results. ， It's a choice in a densely populated area. 、 Industrial zones 、 Testing in areas where pollution is likely to be more significant, such as busy transport areas 。 Meanwhile... ， Need to avoid approaching the source 、 Testing in areas where sampling results may be affected, such as forests 。 And... ， We need to be careful about the timing and frequency of the sampling. 。PM2.5 Concentrations vary over time and environment ， It's therefore a different time frame. 、 Testing under different conditions, including seasons ， To get comprehensive data 。 Meanwhile... ， We need to keep a certain frequency of detection. ， For example, every day. 、 Weekly or monthly time measurements ， To monitor PM2.5 Trends in concentrations 。 Besides ， And the way you process and analyze. 。 I've detected it. PM2.5 Data needs to be processed and analysed ， Including Data Correction 、 Trends analysis 、 Statistical analysis, etc. ， To get accurate results. 。 Meanwhile... ， Need to put the results in local ambient air quality Standard Compare ， Assessing the state of ambient air quality ， Provide a basis for the adoption of relevant measures 。 Overall ，PM2.5 The importance of testing for monitoring environmental air quality and preventing air pollution 。 In progress PM2.5 When testing ， Need to be careful about selecting appropriate detection equipment and methods ， Select the appropriate sampling point and the time ， And rational processing and analysis of detection data ， Ensure accurate and reliable results ， Scientific basis for improving ambient air quality 。
Save to Favorites
Overview
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
ZTOF-4424-10A-Z45 Sensors Zgy-led
Dimensions: 4.4 mm × 2.4 mm × 1.0 mm Detection distance: 2cm~5m Detection Accuracy [Indoors]: ±3%
The ZTOF-4424-10A-Z45 is a highly integrated, compact single-point dTOF (direct Time of Flight) sensor. It integrates a VCSEL emitter, single-photon avalanche diode (SPAD) array, microlenses, TDC (Time Digital Converter), and MCU. dTOF technology and built-in sunlight-rejection and cover-contamination algorithms maintain measurement accuracy independently of target reflectance in varied environments, enabling precise ranging up to5m. The ZTOF-4424-10A-Z45 supports firmware updates through IIC, with modes and algorithms customizable to customer needs. An eye-safety control circuit meets Class I requirements. 1.Product Dimensions:the ZTOF-4424-10A-Z45 uses a12-pin LGA package measuring4.4mm (±0.05mm) x2.4mm (±0.05mm) x1.0mm (±0.075mm); unspecified tolerance is±0.05mm. 2.PCB Pad Dimensions:Figure11, PCB pads, top view. 3.Application Circuit:ZTOF-4424-10A-Z45 block diagram. Notes:1.The external AVDD capacitor should be as close as possible to the AVDDVCSEL and AVSSVCSEL pins. 2.HOST must always drive XSHUT; use a pull-up if host state is unknown. XSHUT requires HW standby mode without IIC communication. Soldering and Storage:1.Soldering Requirements:recommended reflow peak240ºC~260ºC, never exceeding260ºC. The source references a lead-free SMT profile and parameters:Figure13,recommended reflow profile;Table13,recommended oven-temperature test controls. Notes:1.Temperatures are measured at the package top. 2.Maximum reflow cycles:three. 2.Storage Instructions:ZTOF-4424-10A-Z45 is supplied in sealed moisture-barrier bags, with moisture sensitivity level3 (MSL3). Moisture absorbed during packaging can be released and evaporated during soldering, adversely affecting optical characteristics. Each device is baked before dry packing to minimize moisture. Sealed aluminized bags protect against ambient humidity during shipping and storage. Shelf Life:an unopened bag provides12 months from its marked date under the stated conditions:Shelf Life12 months;Ambient Temperature<40℃;Relative Humidity<90%. Beyond12 months, or if the humidity indicator shows excessive storage humidity, rebake the device. Floor Life:ZTOF-4424-10A-Z45 has MSL3 sensitivity, giving168 hours from bag opening under these conditions:Floor Life168 hours;Ambient Temperature<30℃;Relative Humidity<60%. Exceeding floor life or these conditions requires rebaking before reflow or dry packing. Baking:125±5℃ for8 hours;do not bake directly in carrier tape;avoid excessive vibration or impact that could seriously deform or damage packaging. IIC Communication:device address0x41, or0x82 when adding a1bit read/write bit to form8bit;maximum transfer speed1Mbits/s.
-
T05603 Z0S-T05603N-Z2 Sensors Zgy-led
Maximum Power Power Dissipation Pd [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 75 mW Maximum Reverse Voltage VR [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 6 V Maximum Continuous Forward Current IF [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 50 mA
The ZOS-T05603N-Z2 is a compact dual-channel transmissive photo-interrupter combining a high-output GaAsIrED with high-sensitivity dual phototransistors. Its emitter and detector form a transmissive optical circuit interrupter for non-contact sensing.
-
ZCS-2016C ZCS-2016C-08D-Z4 Sensors Zgy-led
Power-Supply Voltage VDD [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：3.6 Voltage Input Input Voltage Vin [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD Output Voltage Vout [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD
The ZCS-2016C-08D-Z4 performs color-temperature measurement and brightness sensing. An internal state machine places it in a low-power state between color-temperature measurements for very low average power consumption. Pin Configuration and Functions. Product Specifications. Electrical Characteristics (VDD=3V, Ta=25℃). Optical Characteristics (VDD=3V, Ta=25℃).
-
ZCS-2020C ZCS-2020C-07D-Z4-1 Sensors Zgy-led
Power-Supply Voltage VDD [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：3.6 Voltage Input Input Voltage Vin [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD Output Voltage Vout [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD
The ZCS-2020C-07D-Z4 - 1 device performs color-temperature measurement and brightness sensing. An internal state machine can place the device in a low-power state between color-temperature measurements, providing very low average power consumption.
-
Zero-Field Atomic Magnetometer QZFM Gen-3 Sensors Spectra-line
Magnetic-Field Sensitivity [Dual-Axis Version; 3-100 Hz Band]: <15 fT/√Hz,3-100 Hz Band (Typical7-10 fT/√Hz) Magnetic-Field Sensitivity [Triaxial Version; 3-100 Hz Band]: <23 fT/√Hz,3-100 Hz Band (Typical15 fT/√Hz, All Three Axes Simultaneously) Dynamic Range: ±5 nT
The source announces the release of QUSPIN's third-generation QZFM sensor Gen-3, completing the final stage of its three-step development of mature zero-field OPM technology. Gen-1(2016) was a proof-of-principle prototype. Gen-2(2019) prioritized user comfort and miniaturization for dense multichannel imaging. Gen-3(2021) resolved the preceding generations' issues and integrated the technology into a powerful platform for practical problems. Gen-3 includes several upgrades, but prioritizes a robust, reliable sensor for future biomagnetic imaging systems.
Related Articles
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform