40G QSFP+ Light Module OTQ-40G-PSM4
OTQ-40G-XX series single mode QSFP+ transceiver is designed for single-mode fiber optical data communications such as 40GBASE-LR4. The transceiver consists of two sections: The transmitter section consists of four directly modulated uncooled CWDM 4- 1271, 1291, 1311, and 1331 nm DFB lasers and four drivers. The receiver section incorporates four PIN photodiodes integrated with four trans-impedance preamplifiers (TIA) and four limiting post-amplifier ICs. The module is with the QSFP+ 38-pin connector to allow hot plug capability. The internally ac coupled high speed serial I/O simplifies interfacing to external circuitry. Only single 3.3V power supply is needed. A serial EEPROM in the transceiver allows the user to access transceiver digital diagnostic monitoring and configuration data via the 2-wire QSFP+ Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic data is held in the lower area while specific data is held in a series of tables in the high memory area. Up to 10.3125 Gbps bi-directional data links per lane Compliant with SFF-8436 QSFP+ MSA Complaint with IEEE 802.3ba 40GBASE-LR4 Hot pluggable electrical interface Link length up to 10km with SMF Uncooled CWDM 4-wavelength DFB LDs: 1271, 1291, 1311, and 1331 nm 2-Wire interface for integrated digital diagnostic monitoring Power consumption < 3.5W Single +3.3 V power supply Temperature range support 0°C to +70°C RoHS compliant
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Data rate | 40 G/s |
| Wavelength | 1310 nm |
| Fiber Type | SM |
| Source | LWDM DFB |
| Reach | 10 km |
| Connector | MPO |
Applications
Datasheet
Supplier Information
Related Products
-
100G QSFP28 Active Optical Cable OM3 FYOC-QDD-**MB Transmitters and Receivers Opticres
Rate [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD]: 400Gb/s to 400Gb/s Interface [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD]: QSFP-DD to QSFP-DD Transmission Distance [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD；Remark: Above “**”refers to the corresponding meters.]: **M(<100M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Active Optical Cable OM3 FYOC-OSS-**MB Transmitters and Receivers Opticres
Rate [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP]: 400Gb/s to 400Gb/s Interface [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP]: OSFP to OSFP Transmission Distance [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP；Remark: Above “**”refers to the corresponding meters.]: **M(<30M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Active Optical Cable OM3 FYOC-OSQD-**MB Transmitters and Receivers Opticres
Rate: 400Gb/s to 400Gb/s Interface: OSFP to QSFP-DD Transmission Distance [Remark: Above “**”refers to the corresponding meters.]: **M(<30M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Passive Direct Attach Copper Cable FYDA-PP-**MB** Transmitters and Receivers Opticres
Rate: 10Gb/s Interface: SFP+ to SFP+ Sort: Passive
Flyin 100G QSFP28 to QSFP28 Passive Copper Cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8436 specifications and provide connectivity between devices using QSFP ports. Remark: Above “**”refers to the corresponding meters. “**”refers to the optional cable diameter.
-
100G QSFP28 Passive Direct Attach Copper Cable FYAC-PP-**MB** Transmitters and Receivers Opticres
Rate: 10Gb/s Interface: SFP+ to SFP+ Sort: Active
Flyin 100G QSFP28 to QSFP28 Passive Copper Cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8436 specifications and provide connectivity between devices using QSFP ports. Remark: Above “**”refers to the corresponding meters. “**”refers to the optional cable diameter.
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform