100G QSFP28 Light Module OTQ-100G-ER4 Lite
Optoray's 100 g QSFP28 optical communication module includes LR4, CWDM4 SR4, AOC series, this series of products using LC or MPO light mouth, compatible with IEEE802.3 bm, SFF - 8636 standard, the built-in function of DDM, low power consumption, small volume and high speed characteristics, is advantageous to the data center to increase capacity, improve the port density and reducing power consumption. It is mainly applied to the internal network of 100G data center, data center interconnection, urban network and other environments. Supports 103.1 / 112Gbps aggregate bit rates Single 3.3V Power Supply and Industry Lowest Power dissipation Up to 100m transmission on MMF OM4 and 2/10/20/0/40km over SMF. Hot-Pluggable QSFP Footprint Class 1 FDA and IEC60825-1 Laser Safety Compliant RoHS6 Compliant Operating Case Temperature Standard: -5~+75C Compliant with QSFP MSA Specification I2C interface with integrated Digital Diagnostic Monitoring 4x25G electrical interface
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Data rate | 100 Gb/s |
| Wavelength | 1294~1310 nm |
| Fiber Type | SM |
| Source | LWDM DFB |
| Reach | 30 km |
| Connector | LC |
Applications
Datasheet
Supplier Information
Related Products
-
100G QSFP28 Active Optical Cable OM3 FYOC-QDD-**MB Transmitters and Receivers Opticres
Rate [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD]: 400Gb/s to 400Gb/s Interface [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD]: QSFP-DD to QSFP-DD Transmission Distance [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD；Remark: Above “**”refers to the corresponding meters.]: **M(<100M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Active Optical Cable OM3 FYOC-OSS-**MB Transmitters and Receivers Opticres
Rate [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP]: 400Gb/s to 400Gb/s Interface [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP]: OSFP to OSFP Transmission Distance [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP；Remark: Above “**”refers to the corresponding meters.]: **M(<30M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Active Optical Cable OM3 FYOC-OSQD-**MB Transmitters and Receivers Opticres
Rate: 400Gb/s to 400Gb/s Interface: OSFP to QSFP-DD Transmission Distance [Remark: Above “**”refers to the corresponding meters.]: **M(<30M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Passive Direct Attach Copper Cable FYDA-PP-**MB** Transmitters and Receivers Opticres
Rate: 10Gb/s Interface: SFP+ to SFP+ Sort: Passive
Flyin 100G QSFP28 to QSFP28 Passive Copper Cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8436 specifications and provide connectivity between devices using QSFP ports. Remark: Above “**”refers to the corresponding meters. “**”refers to the optional cable diameter.
-
100G QSFP28 Passive Direct Attach Copper Cable FYAC-PP-**MB** Transmitters and Receivers Opticres
Rate: 10Gb/s Interface: SFP+ to SFP+ Sort: Active
Flyin 100G QSFP28 to QSFP28 Passive Copper Cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8436 specifications and provide connectivity between devices using QSFP ports. Remark: Above “**”refers to the corresponding meters. “**”refers to the optional cable diameter.
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform