1.25G Series OTP-8631-3
The OTP-86XXX series transceivers are small form factor pluggable module for optical data communications such as Gigabit Ethernet 1000BASE-LX and Fiber Channel 1x SM-LC-L FC-PI. It is with the SFP 20-pin connector to allow hot plug capability. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The transceiver modules are compliant with the SFP Multisource Agreement (MSA). With the hot pluggability, these modules offer an easy way to be installed into SFP MSA compliant ports at any time without the interruption of the host equipments operating online. Hot-Pluggable SFP footprint LC optical transceiver Small Form-Factor Pluggable (SFP) MSA compatible 1.0625Gbps Fibre Channel FC-PI 100-SM-LC-L compliant 1.25Gbps IEEE 802.3 1000BASE-LX compliant AC-coupled differential inputs and outputs Serial ID functionality support Single +3.3 V Power Supply RoHS compliant Temperature range support 0°C to +70°C and -40°C to +85°C Class 1 Laser International Safety Standard IEC-60825 compliant
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Data rate [1.25G Series] | 1.25 Gb/s |
| Wavelength [1.25G Series] | 1310 nm |
| Fiber Type [1.25G Series] | SM |
| Source [1.25G Series] | FP |
| Reach [1.25G Series] | 10Km |
| Connector [1.25G Series] | LC |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
100G QSFP28 Active Optical Cable OM3 FYOC-QDD-**MB Transmitters and Receivers Opticres
Rate [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD]: 400Gb/s to 400Gb/s Interface [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD]: QSFP-DD to QSFP-DD Transmission Distance [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD；Remark: Above “**”refers to the corresponding meters.]: **M(<100M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Active Optical Cable OM3 FYOC-OSS-**MB Transmitters and Receivers Opticres
Rate [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP]: 400Gb/s to 400Gb/s Interface [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP]: OSFP to OSFP Transmission Distance [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP；Remark: Above “**”refers to the corresponding meters.]: **M(<30M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Active Optical Cable OM3 FYOC-OSQD-**MB Transmitters and Receivers Opticres
Rate: 400Gb/s to 400Gb/s Interface: OSFP to QSFP-DD Transmission Distance [Remark: Above “**”refers to the corresponding meters.]: **M(<30M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Passive Direct Attach Copper Cable FYDA-PP-**MB** Transmitters and Receivers Opticres
Rate: 10Gb/s Interface: SFP+ to SFP+ Sort: Passive
Flyin 100G QSFP28 to QSFP28 Passive Copper Cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8436 specifications and provide connectivity between devices using QSFP ports. Remark: Above “**”refers to the corresponding meters. “**”refers to the optional cable diameter.
-
100G QSFP28 Passive Direct Attach Copper Cable FYAC-PP-**MB** Transmitters and Receivers Opticres
Rate: 10Gb/s Interface: SFP+ to SFP+ Sort: Active
Flyin 100G QSFP28 to QSFP28 Passive Copper Cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8436 specifications and provide connectivity between devices using QSFP ports. Remark: Above “**”refers to the corresponding meters. “**”refers to the optional cable diameter.
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform