NK411 fibre-optic identifier
The NK411 fibre-optic identifier uses macro-blank technology to detect the direction and approximate power of the fibre-optic signal without the need to cut fibre-optics or interrupt communications and to provide low-power tips.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Identify wavelength range [Fibre recognition device] | 800～1700 nm |
| Probe Type [Fibre recognition device] | InGaAs |
| Adapter Type [Fibre recognition device] | 0.25 mm diameter (naked fibre); Φ0.9 Φ2.0/ Φ3.0 mm tail fibre) |
| Identification frequency [Fibre recognition device] | CW/270Hz/1kHz/2kHz |
| Signal directional indications [Fibre recognition device] | Left and right LED direction light. |
| Signal direction detection range. [Fibre recognition device] | -48～+10 dBm |
| Signal power detection range. [Fibre recognition device] | -50～+10 dBm |
| Signal frequency indicator [Fibre recognition device] | 270Hz/1kHz/2kHz |
| Frequency detection range (average) [Fibre-optic identifier; Φ0.9/Φ2.0/Φ3.0] | -25～+10 dBm |
| Frequency detection range (average) [Fibre-optic identifier; Φ0.25] | -10～+10 dBm |
| Insertion Loss [Fibre-optic identifier; 1310 nm] | typical:0.8 dB |
| Insertion Loss [Fibre-optic identifier; 1550 nm] | typical:2.5 dB |
| Operating Wavelength [Visual failure positioning; NK411A has red light and NK411B does not have red light] | 650±20 nm |
| Output Power [Visual failure positioning; NK411A has red light and NK411B does not have red light] | ≥2 mW |
| Light Connector [Visual failure positioning; NK411A has red light and NK411B does not have red light] | The Almighty. |
| Output Mode [Visual failure positioning; NK411A has red light and NK411B does not have red light] | CW/1Hz/2Hz |
| Alkaline batteries [Common indicators] | 9 V |
| Batteries worked consecutive hours [Common indicators] | 10 h |
| Operating Temperature [Common indicators] | -10～+50 ℃ |
| Storage Temperature [Common indicators] | -40～+70 ℃ |
| Dimensions [Common indicators] | 220 mm × 48 mm × 40 mm |
| Weight [Common indicators] | 200 g |
Key Features
Datasheet
Supplier Information
Related Products
-
CLE-BOX-S Fiber Inspection Tools Tongqitelecom
Use range: SC,FC,ST,MU,LC,MPO,MT,MTRJ Dimensions (long* wide* high): 130mm×60mm×30mm Lifetime: Over 500 times/box
-
CLE-BOX-T Fiber Inspection Tools Tongqitelecom
Use range: SC,FC,ST,MU,LC,MPO,MT,MTRJ(w/o pins) Dimensions: 130mm X 88mm X 32mm Number of times used: More than 500 cleanups/boxes
-
TQ-FM-100C+ Fiber Inspection Tools Tongqitelecom
Camera magnification multiplier: 80X, 200X or 400X Resolution: 0.5 um CMOS: 200W pixels
-
TQ-FM-100C+ desktop fibre-optic microscope Fiber Inspection Tools Tongqitelecom
Camera magnification multiplier: 80X, 200X or 400X Resolution: 0.5 um CMOS: 200W pixels
-
TQ-FM-100D Fiber Inspection Tools Tongqitelecom
Camera magnification multiplier: 80X, 200X or 400X Resolution: 0.5 um CMOS: 200W pixels
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform