WinCamD Series Beam Profiler WinCamD-LCM-NE
1.1 WinCamD-LCM series laser beam profilers: WinCamD-LCM is a cost-effective general-purpose beam-profiler series with a broad 190-1610 nm wavelength range, beam diameters spanning 55 um-11 mm and high resolution of 4.2MPixel. It also offers an electronically triggered global shutter and update rates up to 60+Hz. The series works with full-featured software requiring no license fee, with unlimited installations and free software updates. Applications include continuous and pulsed laser profiling, real-time laser-system monitoring and M2 beam-quality measurement with the M2DU rail. 1.2 WinCamD-LCM-NE series near-infrared-enhanced beam profilers: the CMOS beam profiler uses a new 1-inch high-resolution CMOS sensor with no smearing. Shutter and trigger options simplify pulse capture for continuous and pulsed laser profiling. Spectral response is improved between 400 and 1000 nm, but sensor microlenses make it unsuitable for UV wavelengths, and a TEL phosphor coating is unavailable. 1.3 WinCamD-GCM series beam profilers for long-distance connections: designed for applications requiring long cables, the GCM uses the same sensor as the WinCamD-LCM (11.3 x 11.3 mm active area, 4.2 million pixels, 5.5 x 5.5μm pixels and global shutter). GigE Vision suits remote beam profiling requiring long-distance transmission of large data volumes. 1.4 WinCamD-QD series quantum-dot SWIR beam profilers: colloidal quantum-dot sensors provide high-quality profiling of visible, short-wave infrared (SWIR) and extended short-wave infrared (eSWIR) sources. With 15 µm pixels, a broad 350-2000 nm wavelength range and global shutter, the series offers outstanding beam profiling. Signal-to-noise ratio over 2100:1 enables ISO 11146-compliant measurements. The advanced colloidal quantum-dot sensor has very high sensitivity and a global shutter for pulsed-beam profiling. Highly customizable, user-centered software has no license fees, unlimited installations and free updates. It supports interfacing with external programs, data logging and fully automatic M2 measurements with the M2DU translation stage, all without extra fees. Sampling, absorptive and reflective attenuation options sufficiently attenuate higher-power beams before profiling. 1.5 WinCamD-IR-BB series mid-infrared beam-quality analyzers: an imaging solution for MWIR and FIR lasers covering near- to mid-infrared wavelengths (2um-16um), measuring continuous and pulsed lasers from microwatt beams to lasers at the kilowatt level and above. Its user-friendly software interface enables convenient, fast analysis and statistics of all beam-spot information. Maximum measurable collimated-beam diameter is 25mm. Accessories extend measurement to very small spots of a few um, very large spots above 25mm, beam quality M², divergence and other parameters. Adding accessories meets future requirements and maximizes use of one camera for different measurements without repeated camera purchases.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelengths [WinCamD-LCM-NE；WinCamD-LCM-NE] | 355-1150nm |
| Photosensitive Area [WinCamD-LCM-NE；WinCamD-LCM-NE] | 11.3 mm × 11.3 mm |
| Frame Format [WinCamD-LCM-NE；WinCamD-LCM-NE] | 1 in |
| Resolution [WinCamD-LCM-NE；WinCamD-LCM-NE] | 2048 pixels × 2048 pixels |
| Pixel Size [WinCamD-LCM-NE；WinCamD-LCM-NE] | 5.5 µm |
| Shutter Mode [WinCamD-LCM-NE；WinCamD-LCM-NE] | Global shutter or TTL-triggered / optically triggered shutter |
| Minimum Measurable Spot (ØFWHM) [WinCamD-LCM-NE；WinCamD-LCM-NE；ØFWHM；Expandable Using Accessories] | 55um (extendable using accessories) |
| Acquisition Rate [WinCamD-LCM-NE；WinCamD-LCM-NE] | 12-60 fps |
| Minimum Exposure Time [WinCamD-LCM-NE；WinCamD-LCM-NE] | 79 us |
| Signal-to-Noise Ratio SNR [WinCamD-LCM-NE；WinCamD-LCM-NE] | 2,500:1 (34 dB optical / 68 dB electrical) |
| Chip Type [WinCamD-LCM-NE；WinCamD-LCM-NE] | CMOS |
| ADC [WinCamD-LCM-NE；WinCamD-LCM-NE] | 12 bit |
| Interface Type [WinCamD-LCM-NE；WinCamD-LCM-NE] | USB3.0 |
| Whether Pulsed Lasers Can Be Measured [WinCamD-LCM-NE；WinCamD-LCM-NE] | Yes |
| Dimensions [WinCamD-LCM-NE；WinCamD-LCM-NE；L*H*W] | 46 mm × 46 mm × 20 mm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Beam'R2 Series Slit-Scanning Beam Quality Analyzer Beam Profilers Sinteclaser
Wavelengths [Si Detector]: 190 至 1150 nm Wavelengths [InGaAs Detector]: 650 至 1800 nm Wavelengths [Si + InGaAs Detector]: 190 至 1800 nm
Beam'R2 suits diverse beam analysis. With standard2.5μm slits/larger knife edges,Beam'R2 measures beams down to2μm. Silicon,InGaAs or extended InGaAs let Beam'R2 cover190 nm to2500 nm. Beam'R2 scanning slits offer higher resolution than camera systems.
-
BeamMap2 Collimate Multiplane Slit-Scanning Beam Profiler Beam Profilers Sinteclaser
Wavelengths [Si Detector]: 190 至 1150 nm Wavelengths [InGaAs Detector]: 650 至 1800 nm Wavelengths [Si + InGaAs Detector]: 190 至 1800 nm
BeamMap2 represents a completely different approach to real-time beam profiling. It extends the measurement capabilities of Beam'R2 to multiple locations along the beam path. This real-time scanning-slit system uses pairs of XY slits in multiple Z planes on a rotating disk to simultaneously measure four beam profiles at four different Z positions. BeamMap2's unique design is particularly advantageous for real-time measurement of focal position, M², beam divergence, and pointing. Compared with the standard BeamMap2, BeamMap2 Collimate is specially designed with plane spacing significantly increased by 5 mm for well-collimated beams.
-
BeamMap2 Series Slit-Scanning Beam Quality Analyzer Beam Profilers Sinteclaser
Wavelengths [Si Detector]: 190 至 1150 nm Wavelengths [InGaAs Detector]: 650 至 1800 nm Wavelengths [Si + InGaAs Detector]: 190 至 1800 nm
BeamMap2 represents a completely different approach to real-time beam profiling. It extends the measurement capabilities of Beam'R2 to multiple locations along the beam path. This real-time scanning-slit system uses pairs of XY slits in multiple Z planes on a rotating disk to simultaneously measure four beam profiles at four different Z positions. BeamMap2's unique design is particularly advantageous for real-time measurement of focal position, M², beam divergence, and pointing.
-
TaperCamD-LCM Series Large-Aperture Beam Profiler Beam Profilers Sinteclaser
Response Wavelength: 355 - 1150 nm Photosensitive Area: 25 mm × 25 mm Resolution: 2048 x 2048
TaperCamD-LCM provides a 25 x 25 mm active area,4.2 Mpixels,12.5 x 12.5μm effective pixels, optical/electronic global-shutter triggering, and 2500:1 SNR, with the largest active sensor area and USB power. The source describes WinCamD-LCM as a large-beam profiler combining high SNR and a global shutter with a high-quality fiber taper. TaperCamD-LCM offers compact, easy measurement of varied large CW or pulsed lasers. TaperCam profilers suit CW/pulsed beam profiling, field laser-system servicing, optical components, instrument calibration, beam-drift monitoring/logging, OEM integration, and beam-processing quality control.
-
Beam Profiler Beam Profilers Spectra-line
Beam width parameters: FMHM,1/e2,4σ,statistical moments up to 4th for X and Y directions independently Fitting: Gauss ande Lorentz fit for X and Y direction independently; Returning destribution parameters Beam geometry: Astigmatic ande elliptical
Beam profilers use CCD or CMOS imaging with image-processing software to analyze spot characteristics and intensity distributions. Puxian Technology's Huaris series offers cost-effective profiling in a compact metal housing with a universal C-Mount for lenses and filters. An optional 7-inch android tablet, preinstalled and preconfigured for immediate use, enables portability. The laser cloud service supports remote access, data acquisition, and analysis.
Related Articles
Shandong Optochip specializes in independent R&D of industrial-grade optical chips for optical communication and fiber sensing. Our business includes overseas chip tape-out, domestic precision device packaging
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Semiconductor laser diodes are essential light sources for industrial sensing, LiDAR and laser printing. Many engineers waste time picking mismatched models. We summarize 4 simple selection standards, plus a mature industrial product: HGLD-790TO5.6-ZSP-10mW from HAUCORE.
Driven by fast‑growing demands of 3D perception, biometric authentication and machine‑vision industries, near‑infrared imaging optics have become a vital hardware component for intelligent sensing systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform