STVL Series Direct-Link Sensor DLS Modules STVL-DLS-2工业模块
The 3D camera module (Direct Link Sensor, DLS) combines sensor hardware and powerful software for custom 3D applications. Unlike other 3D cameras/3D smart cameras, users create their own 3D solutions. One or two Sony cmos sensors connect by FPGA to ViALux high-performance DLP projection for precise internal synchronization. Direct Link reduces interfaces/cabling for reliability. The 3D scan API, proven in all STVL 3D scanners, automatically provides (x,y,z) coordinates for 3D vision so users focus on value-adding software. The 3D module architecture is shown. FGPA controls high-performance DLP projection and digital-imaging sensors; patterns/acquisition synchronize and ROI readout is supported. Frame rates 166FPS to 5000FPS. User patterns upload to DLS RAM for single/loop projection; captured images buffer in onboard RAM, storing up to 1.592 images (10-bit,1.920 x 1.200 pixels) for PC processing. One FPGA handles all streams for real-time precision. USB 3.2 SuperSpeed streams to/from RAM; lossless real-time compression improves uploading, with optional binning on download. DLS benefits vision requiring flexible illumination. STVL-DLS-1 and STVL-DLS-2 suit different fields/working distances WD; DFOV=0.69 x WD. STVL-DLS-1. The STVL-DLS-2 industrial module is a version of STVL-DLS-2; STVL-DLS-2 industrial adds dustproof housing/passive cooling. Both DLS modules use long-life high-power LEDs. Optional zSnapper SDK (zSn.dll) enables fast, precise 3D coordinates. Powerful 3D measurement software developed for 3D scanners is now released at module level, directly providing (x,y,z) for 3D vision. Model/configuration options: Product | Throw Ratio（WD/FoV） | Working Distance（mm） | Base Length (Stereo Base)（mm） | Configuration | LED Color Options | Software Options STVL-DLS-1Module | 1.8 | 1300-3000 | 410 | 1 x DLP7000， 1 xSony IMX174 | Standard: White 460 nm Blue 730 nm Near-IR 850 nm Near-IR | P/N 9623 zSnapper® SDKSoftware STVL-DLS-2Module | 1.8 | 600or1000 | 160 | 1 x DLP7000， 2 xSony IMX174 | Standard: White 460 nm Blue 730 nm Near-IR 850 nm Near-IR | P/N 9623 zSnapper® SDKSoftware STVL-DLS-2Industrial Module | 1.8 | 600or1000 | 160 | 1 x DLP7000， 2 xSony IMX174 | Standard: White 460 nm Blue 730 nm Near-IR 850 nm Near-IR | P/N 9623 zSnapper® SDKSoftware
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| DLP Projection Chipset | DLP7000 micromirror array, 1024 x 768 mirrors |
| Maximum Pattern Update Rate [Full Array] | 22727 fps |
| Image Sensor Chip | Sony Pregius IMX-1741920 x 1200 pixels |
| Maximum Image Buffer Capacity [Full resolution; 10-bit images] | 1592 at full resolution, 10-bit images. |
| DLS Frame Rate [Image sensor lines (ROI): 1200] | 166 frames/s |
| Image Sensor Bit Depth [Image sensor lines (ROI): 1200] | 10 bits |
| DLP Projector Bit Depth [Image sensor lines (ROI): 1200] | 8 bits |
| DLS Frame Rate [Image sensor lines (ROI): 676] | 289 frames/s |
| Image Sensor Bit Depth [Image sensor lines (ROI): 676] | 10 bits |
| DLP Projector Bit Depth [Image sensor lines (ROI): 676] | 8 bits |
| DLS Frame Rate [Image sensor lines (ROI): 374] | 500 frames per second |
| Image Sensor Bit Depth [Image sensor lines (ROI): 374] | 10 bits |
| DLP Projector Bit Depth [Image sensor lines (ROI): 374] | 7 bits |
| DLS Frame Rate [Image sensor lines (ROI): 236] | 750 frames/s |
| Image Sensor Bit Depth [Image sensor lines (ROI): 236] | 10 bits |
| DLP Projector Bit Depth [Image sensor lines (ROI): 236] | 6 bits |
| DLS Frame Rate [Image sensor lines (ROI): 168] | 1000 frames per second |
| Image Sensor Bit Depth [Image sensor lines (ROI): 168] | 10 bits |
| DLP Projector Bit Depth [Image sensor lines (ROI): 168] | 6 bits |
| DLS Frame Rate [Image sensor lines (ROI): 70] | 1900 frames/s |
| Image Sensor Bit Depth [Image sensor lines (ROI): 70] | 10 bits |
| DLP Projector Bit Depth [Image sensor lines (ROI): 70] | 5 bits |
| DLS Frame Rate [Image sensor lines (ROI): 2.] | 5150 frames/s |
| Image Sensor Bit Depth [Image sensor lines (ROI): 2.] | 10 bits |
| DLP Projector Bit Depth [Image sensor lines (ROI): 2.] | 2 bits |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
ZTOF-4424-10A-Z45 Sensors Zgy-led
Dimensions: 4.4 mm × 2.4 mm × 1.0 mm Detection distance: 2cm~5m Detection Accuracy [Indoors]: ±3%
The ZTOF-4424-10A-Z45 is a highly integrated, compact single-point dTOF (direct Time of Flight) sensor. It integrates a VCSEL emitter, single-photon avalanche diode (SPAD) array, microlenses, TDC (Time Digital Converter), and MCU. dTOF technology and built-in sunlight-rejection and cover-contamination algorithms maintain measurement accuracy independently of target reflectance in varied environments, enabling precise ranging up to5m. The ZTOF-4424-10A-Z45 supports firmware updates through IIC, with modes and algorithms customizable to customer needs. An eye-safety control circuit meets Class I requirements. 1.Product Dimensions:the ZTOF-4424-10A-Z45 uses a12-pin LGA package measuring4.4mm (±0.05mm) x2.4mm (±0.05mm) x1.0mm (±0.075mm); unspecified tolerance is±0.05mm. 2.PCB Pad Dimensions:Figure11, PCB pads, top view. 3.Application Circuit:ZTOF-4424-10A-Z45 block diagram. Notes:1.The external AVDD capacitor should be as close as possible to the AVDDVCSEL and AVSSVCSEL pins. 2.HOST must always drive XSHUT; use a pull-up if host state is unknown. XSHUT requires HW standby mode without IIC communication. Soldering and Storage:1.Soldering Requirements:recommended reflow peak240ºC~260ºC, never exceeding260ºC. The source references a lead-free SMT profile and parameters:Figure13,recommended reflow profile;Table13,recommended oven-temperature test controls. Notes:1.Temperatures are measured at the package top. 2.Maximum reflow cycles:three. 2.Storage Instructions:ZTOF-4424-10A-Z45 is supplied in sealed moisture-barrier bags, with moisture sensitivity level3 (MSL3). Moisture absorbed during packaging can be released and evaporated during soldering, adversely affecting optical characteristics. Each device is baked before dry packing to minimize moisture. Sealed aluminized bags protect against ambient humidity during shipping and storage. Shelf Life:an unopened bag provides12 months from its marked date under the stated conditions:Shelf Life12 months;Ambient Temperature<40℃;Relative Humidity<90%. Beyond12 months, or if the humidity indicator shows excessive storage humidity, rebake the device. Floor Life:ZTOF-4424-10A-Z45 has MSL3 sensitivity, giving168 hours from bag opening under these conditions:Floor Life168 hours;Ambient Temperature<30℃;Relative Humidity<60%. Exceeding floor life or these conditions requires rebaking before reflow or dry packing. Baking:125±5℃ for8 hours;do not bake directly in carrier tape;avoid excessive vibration or impact that could seriously deform or damage packaging. IIC Communication:device address0x41, or0x82 when adding a1bit read/write bit to form8bit;maximum transfer speed1Mbits/s.
-
T05603 Z0S-T05603N-Z2 Sensors Zgy-led
Maximum Power Power Dissipation Pd [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 75 mW Maximum Reverse Voltage VR [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 6 V Maximum Continuous Forward Current IF [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 50 mA
The ZOS-T05603N-Z2 is a compact dual-channel transmissive photo-interrupter combining a high-output GaAsIrED with high-sensitivity dual phototransistors. Its emitter and detector form a transmissive optical circuit interrupter for non-contact sensing.
-
ZCS-2016C ZCS-2016C-08D-Z4 Sensors Zgy-led
Power-Supply Voltage VDD [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：3.6 Voltage Input Input Voltage Vin [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD Output Voltage Vout [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD
The ZCS-2016C-08D-Z4 performs color-temperature measurement and brightness sensing. An internal state machine places it in a low-power state between color-temperature measurements for very low average power consumption. Pin Configuration and Functions. Product Specifications. Electrical Characteristics (VDD=3V, Ta=25℃). Optical Characteristics (VDD=3V, Ta=25℃).
-
ZCS-2020C ZCS-2020C-07D-Z4-1 Sensors Zgy-led
Power-Supply Voltage VDD [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：3.6 Voltage Input Input Voltage Vin [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD Output Voltage Vout [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD
The ZCS-2020C-07D-Z4 - 1 device performs color-temperature measurement and brightness sensing. An internal state machine can place the device in a low-power state between color-temperature measurements, providing very low average power consumption.
-
Zero-Field Atomic Magnetometer QZFM Gen-3 Sensors Spectra-line
Magnetic-Field Sensitivity [Dual-Axis Version; 3-100 Hz Band]: <15 fT/√Hz,3-100 Hz Band (Typical7-10 fT/√Hz) Magnetic-Field Sensitivity [Triaxial Version; 3-100 Hz Band]: <23 fT/√Hz,3-100 Hz Band (Typical15 fT/√Hz, All Three Axes Simultaneously) Dynamic Range: ±5 nT
The source announces the release of QUSPIN's third-generation QZFM sensor Gen-3, completing the final stage of its three-step development of mature zero-field OPM technology. Gen-1(2016) was a proof-of-principle prototype. Gen-2(2019) prioritized user comfort and miniaturization for dense multichannel imaging. Gen-3(2021) resolved the preceding generations' issues and integrated the technology into a powerful platform for practical problems. Gen-3 includes several upgrades, but prioritizes a robust, reliable sensor for future biomagnetic imaging systems.
Related Articles
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform