D80-FC/PC Patch Cord Coating
D80 fiber patch cords use high-precision D80 connectors or modified D80 connectors with air-gap protection, assembled with large-core power-delivery fibers whose end faces are finely ground and polished. They are mainly used to transmit power in semiconductor laser modules and low- to medium-power solid-state lasers. An environmentally friendly adhesive-free process inside the connector further improves fiber heat dissipation and service life, meeting high-power transmission requirements for laser welding and cutting. Fujin Optoelectronics also provides custom fiber patch cords and coating services for customer-supplied patch cords, such as SMA905 and FC/PC patch cords.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Fiber Core Diameter [or as specified by the customer] | Fiber core/cladding 400/440um; or as specified by the customer |
| Patch Cord Length [or customized to customer requirements] | 2m; or customized to customer requirements |
| Assembly Method | FC/PC connector at one end and D80 connector at the other, with PVC protective tubing of outer diameter 3.0 |
| Coating Specifications R [Both patch-cord ends coated; @780-1000nm; or customized to customer requirements] | Both patch-cord ends coated, coating parameter R<0.5%@780-1000nm; or customized to customer requirements |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
TSCQ1012 40~100G bit-error-rate tester burn-in system Material-based Production Equipment Terawan
Data Rate [Performance Parameter Table]: 9~30 Gb/s Power Supply [Performance Parameter Table]: typical:8.5 V(DC) Power Supply [Performance Parameter Table]: 5~9 V(DC)
The TSCQ1012 is a 40GE/44.3G/56G/100G bit-error-test aging system supporting 8 optical-module test/development paths for 40G/100G QSFP+/QSFP28. It mainly serves 40GE/CPRI/64GFC/100GE/128GFC module/AOC development.
-
Quartz coating series Material-based Production Equipment Feilihua
The coating series includes quartz granules Ti3O5, quartz silicon rings, and ion-source quartz cups.
-
C series DC pulsed power supply (benchmarked against AE Pinnacle plus) 500W 1000W2000W3000W ZY/DCPulseC1F-005K01 Material-based Production Equipment Zypsu
Power Supply Power: 500 W Input Voltage: 220Vac±10%+PE Input Frequency: 50~60 HZ
-
C series DC pulsed power supply (benchmarked against AE Pinnacle plus) 500W 1000W2000W3000W ZY/DCPulseC1F-01K02 Material-based Production Equipment Zypsu
Power Supply Power: 1000 W Input Voltage: 220Vac±10%+PE Input Frequency: 50~60 HZ
-
C series DC pulsed power supply (benchmarked against AE Pinnacle plus) 500W 1000W2000W3000W ZY/DCPulseC1F-02K04 Material-based Production Equipment Zypsu
Power Supply Power: 2000 W Input Voltage: 220Vac±10%+PE Input Frequency: 50~60 HZ
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform