Single-Mode + Coreless + Ball-Formed Fiber End Cap
A fiber end cap is formed by splicing a short silica rod or GRIN fiber to a fiber end face. There are two main types: a fused-silica rod spliced to a fiber to reduce optical energy density at the transmission interface of a high-power laser fiber, and a self-focusing lens end cap formed by splicing GRIN fiber to ordinary single-mode fiber for miniature imaging requirements.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| End Cap Use [The above parameters are approximate references only; actual orders require the buyer to provide more detailed information] | QBH connector / optical laser coupling / miniature imaging system |
| Number of Splice Points [The above parameters are approximate references only; actual orders require the buyer to provide more detailed information] | Fewer than 5 |
| End Cap Material [The above parameters are approximate references only; actual orders require the buyer to provide more detailed information] | UV fused silica rod / coreless fiber / graded-index fiber |
| End Cap Dimensions [The above parameters are approximate references only; actual orders require the buyer to provide more detailed information] | Customer-supplied parameters |
| Fiber Type [The above parameters are approximate references only; actual orders require the buyer to provide more detailed information] | SMF-28E/SM-Hi1060/MM-200-220-22NA/ Customer-specified |
| Total Fiber Length and Stripped Length [The above parameters are approximate references only; actual orders require the buyer to provide more detailed information] | Customer-specified |
| Coating Requirements [The above parameters are approximate references only; actual orders require the buyer to provide more detailed information; @CW±25nm; customizable to customer requirements] | R<0.2% @ CW±25nm / customizable to customer requirements |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
AFC110APC-1064 Optical Fibers U-optic
Alignment Wavelength: 1064 nm Beam Waist Diameter: 1.38 mm Focal Length: 6.31 mm
-
AFC110APC-1550 Optical Fibers U-optic
Alignment Wavelength: 1550 nm Beam Waist Diameter: 1.21 mm Focal Length: 6.37 mm
-
N3D fiber laser marking kit Optical Fibers Central-laser
Clear Aperture Dimension [Model=P10]: 10 mm Input Beam Spot [Model=P10]: 7 mm XY-Axis Speed [Model=P10]: ≤5000 mm/s
N3D fiber-laser marking kit. Models P10, P10 (water-cooled), P10N, and P14 have clear apertures of 10mm, 10mm, 10mm, and 14mm, respectively.
-
Fiber MM3D pre-focusing laser marking kit Optical Fibers Central-laser
Clear Aperture Dimension [Model=PR10]: 10 mm Input Beam Spot [Model=PR10]: 7 mm XY-Axis Speed [Model=PR10]: ≤5000 mm/s
Fiber MM3D pre-focus laser-marking kit. Models PR10, PR20, and PR30 have clear apertures of 10mm, 20mm, and 30mm, respectively.
-
Fiber MM3D post-focusing laser marking kit Optical Fibers Central-laser
Clear Aperture Dimension [Model=P10]: 10 mm Input Beam Spot [Model=P10]: 7 mm XY-Axis Speed [Model=P10]: ≤5000 mm/s
Fiber MM3D post-focus laser-marking kit. Models P10, P10 (water-cooled), P10N, P14, P14 (water-cooled), and P20 have clear apertures of 10mm, 10mm, 10mm, 14mm, 14mm, and 20mm, respectively.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform