ZSIRM-Z3B4N88P
ZSIRM-Z3B4N88P is a miniature surface-mount infrared receiver for infrared remote control and other applications requiring improved suppression of ambient light or lamp light. A separate PIN photodiode and preamplifier IC circuit are assembled on a single lead frame. The epoxy package incorporates a special infrared filter and built-in shielding for interference resistance.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Power Supply Voltage Supply voltage Vcc [Absolute Maximum Ratings ;Ta=25℃] | 0–6 V |
| Operating Temperature Operating Temperature Topr [Absolute Maximum Ratings ;Ta=25℃] | -20~+80 ℃ |
| Storage Temperature Tstg [Absolute Maximum Ratings ;Ta=25℃] | -25~+85 ℃ |
| Lead Soldering Temperature Tsol [Absolute maximum ratings; Ta=25℃; <5s; solder at least 2.5mm from the encapsulant, within 5s] | 260 ℃ |
| Operating Voltage working voltage Vcc [Optoelectronic Characteristics ；Ta=25℃] | min ：2.7； max ：5.5 |
| Quiescent Current / Supply Current Icc [Optoelectronic Characteristics ；Ta=25℃；Vcc=5.0v] | min ：0.10； typical ：0.22； max ：0.30 |
| Carrier Frequency B.P.F. Center Frequency fo [Optoelectronic Characteristics ；Ta=25℃] | typical ：37.9 |
| Peak Wavelength λp [Optoelectronic Characteristics ；Ta=25℃] | typical ：940 |
| Low-Level Output / Low-Level Output Voltage [Optoelectronic Characteristics ；Ta=25℃] | typical ：0.20； max ：0.40 |
| High-Level Output / High-Level Output Voltage Voh [Optoelectronic Characteristics ；Ta=25℃；Vcc=5.0v] | min ：Vs-0.4； max ：Vs+0.2 |
| Pulse Width Tpw [Optoelectronic Characteristics ；Ta=25℃] | min ：450； typical ：600； max ：750 |
| Arrival Distance | min ：16； typical ：20 |
| Arrival Distance | min ：10； typical ：13 |
| Half Angle 2θ1/2 [Optoelectronic Characteristics ；Ta=25℃] | typical ：±45 |
| High Temperature [Reliability Test; Note 2: Must Meet Optoelectronic Characteristics after 1 Hour at Room Temperature] | Ta=+80℃；t=48H |
| Life Test [Reliability Test; Note 2: Must Meet Optoelectronic Characteristics after 1 Hour at Room Temperature] | VCC=5V；t=500H |
| Low Temperature [Reliability Test; Note 2: Must Meet Optoelectronic Characteristics after 1 Hour at Room Temperature] | Ta=-30℃；t=48H |
| Temperature Cycling [Reliability Test; Note 2: Must Meet Optoelectronic Characteristics after 1 Hour at Room Temperature] | -35℃(0.5H)~+85℃(0.5H)，20cycle |
| Drop Test [Reliability Test; Note 2: Must Meet Optoelectronic Characteristics after 1 Hour at Room Temperature] | Free fall from a height of 75cm onto a hardwood board, 3 times |
| Solderability Test [Reliability Test; Note 3: Must Meet Optoelectronic Characteristics and Solder Coverage ≥90%] | Ta=260℃；t=5s |
| Loaded Quantity | 2000 pcs/reel |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
1700nm PD
Optical Detectors
Mindsemi
-
4×100G PAM4 PD Array
Optical Detectors
Mindsemi
Product Rate: 100G
-
4×10G PD Array
Optical Detectors
Mindsemi
Product Rate: 10G
-
Silicon photomultiplier
Optical Detectors
Adapsphotonics
Lingming Photonics' latest P5P silicon photomultipliers combine photon trapping, microlenses, and back-side illumination (BSI). At 905nm they offer PDE up to 25%, with recovery time, dark count rate, crosstalk, and other parameters leading competing products. Optimized for lidar, the P5P maintains high PDE at lower bias and operates at temperatures up to 105°C. For automotive reliability, the P5P SiPM was expected to complete AEC-Q102 by the end of 2022. Lingming offers single-line to 16-line SiPMs and customer-specific development.
-
ADS6311 fully solid-state large-array SPAD dToF chip
Optical Detectors
Adapsphotonics
Using advanced 3D-Stacking and loop-based TDC design, Lingming Photonics stacks sensitive SPAD devices above high-speed logic, combining sensing, computation, and storage. Multiple generations have achieved grayscale output up to 768x576 and TOF depth output at 256x192, enabling high-resolution depth-camera chips.
Related Articles
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
On November 28, 2024, the 3rd China Laser Star Enterprise Summit & Advanced Laser Processing Technology Summit, an annual influential event in the laser industry, was grandly held in Wuhan Optics Valley.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
As premium broadband light sources situated between traditional LEDs and laser diodes, MicroLight superluminescent‑diode (SLD) products combine broad spectral bandwidth, sufficient optical output power and low‑coherence performance.
Loading...
Name
Phone
Organization
Use Case
Database Platform