ZSIRM-C7P1H81
ZSIRM-C7P1H81 infrared receiver serves remote controls and applications needing improved ambient-light rejection. Separate PIN diode and preamplifier IC share one lead frame. Epoxy packaging includes a special IR filter,providing good disturbed-light performance and protection against uncontrolled output pulses.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Power Supply Voltage Supply voltage Vcc [Absolute Maximum Ratings ;Ta=25℃] | 0–6 V |
| Operating Temperature Operating Temperature Topr [Absolute Maximum Ratings ;Ta=25℃] | -20~+80 ℃ |
| Storage Temperature Tstg [Absolute Maximum Ratings ;Ta=25℃] | -25~+85 ℃ |
| Lead Soldering Temperature Tsol [Absolute maximum ratings; Ta=25℃; <5s; solder at least 2.5mm from the encapsulant, within 5s] | 260 ℃ |
| Operating Voltage working voltage Vcc [Optoelectronic Characteristics ；Ta=25℃] | min ：2.7； max ：5.5 |
| Quiescent Current / Supply Current Icc [Optoelectronic Characteristics ；Ta=25℃；Vcc=5.0v] | typical ：0.2； max ：0.35 |
| Carrier Frequency B.P.F. Center Frequency fo [Optoelectronic Characteristics ；Ta=25℃] | typical ：37.9 |
| Peak Wavelength λp [Optoelectronic Characteristics ；Ta=25℃] | typical ：940 |
| Low-Level Output / Low-Level Output Voltage [Optoelectronic Characteristics ；Ta=25℃] | typical ：0.20； max ：0.40 |
| High-Level Output / High-Level Output Voltage Voh [Optoelectronic Characteristics ；Ta=25℃；Vcc=5.0v] | min ：Vs-0.4； max ：Vs+0.2 |
| Pulse Width Tpw [Optoelectronic Characteristics ；Ta=25℃] | min ：400； max ：800 |
| Arrival Distance L1 [Optoelectronic Characteristics ；Ta=25℃；θ=0] | min ：10 |
| Half Angle 2θ1/2 [Optoelectronic Characteristics ；Ta=25℃] | typical ：±35 |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
1700nm PD
Optical Detectors
Mindsemi
-
4×100G PAM4 PD Array
Optical Detectors
Mindsemi
Product Rate: 100G
-
4×10G PD Array
Optical Detectors
Mindsemi
Product Rate: 10G
-
Silicon photomultiplier
Optical Detectors
Adapsphotonics
Lingming Photonics' latest P5P silicon photomultipliers combine photon trapping, microlenses, and back-side illumination (BSI). At 905nm they offer PDE up to 25%, with recovery time, dark count rate, crosstalk, and other parameters leading competing products. Optimized for lidar, the P5P maintains high PDE at lower bias and operates at temperatures up to 105°C. For automotive reliability, the P5P SiPM was expected to complete AEC-Q102 by the end of 2022. Lingming offers single-line to 16-line SiPMs and customer-specific development.
-
ADS6311 fully solid-state large-array SPAD dToF chip
Optical Detectors
Adapsphotonics
Using advanced 3D-Stacking and loop-based TDC design, Lingming Photonics stacks sensitive SPAD devices above high-speed logic, combining sensing, computation, and storage. Multiple generations have achieved grayscale output up to 768x576 and TOF depth output at 256x192, enabling high-resolution depth-camera chips.
Related Articles
The ElFys PD25s series photodetectors adopt ElFys‑patented Black Silicon Induced Junction technology, delivering excellent spectral response spanning deep‑ultraviolet, visible and near‑infrared bands for diverse high‑precision photometry applications. Sub‑variants including H, M, HG and MG are optimised for low‑capacitance, low‑dark‑current and high‑reverse‑bias guard‑ring operations respectively. Multiple packaging configurations are available to satisfy various system‑design requirements.
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Wuhan Optical Valley Interlink Technology Co., Ltd. was founded in 2013 by a technical team from Huazhong University of Science and Technology.
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Loading...
Name
Phone
Organization
Use Case
Database Platform