mora Laser fL-532-T005-R
The fLaser fiber laser was developed for fiber-optic spectroscopy systems. Standard fiber outputs have 50 / 100μm core diameters to meet most experimental needs. fLaser also provides 3 common laser bands for Raman and PL applications, making it a typical low-power fiber laser needed by most laboratories.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Center Wavelength | 532±1nm |
| Linewidth | <0.2nm |
| Power | 0~50mW 可调 |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
Online In-Situ Fluorescence Spectrometer InView-PL Spectrometers Ideaoptics
Fluorescence Spectra [450nm Excitation ; Customizable]: 450nm Excitation,600~1100nm Fluorescence Detection Band(Customizable) Absorption Spectrum: 400~1100nm Spectral Resolution(Cooled): ~5nm
InView-PL is an online, in-situ fluorescence spectrometer for monitoring photovoltaic thin-film formation. It can be integrated with spin-coating, VCD, annealing, and film-aging equipment to monitor PL, absorption, and scattering signals in real time during film formation, crystallization, and aging. This helps researchers understand crystallization rates and phase-transition dynamics, optimize conditions, control crystallization, improve crystal quality, and increase device efficiency and stability.
-
Agilent CARY5000 Spectrometers DCGD
-
Agilent CARY7000 Spectrometers DCGD
-
HP-3010 200-1100nm Low-Noise Miniature Fiber Spectrometer Spectrometers Hhitgroup
Detector - Detector Type: Linear Array (CMOS) Detector - Effective Pixels: 2048 Detector - Pixel Size: 14μmx 200μm
The HP-3010 miniature spectrometer is a new low-noise miniature fiber spectrometer developed by Hhitgroup. The HY-3010 uses a high-sensitivity CMOS linear-array sensor covering the 200-1100nm wavelength range, with high sensitivity and extremely low noise. Applications include geographic spectral-data acquisition, water reflectance acquisition, transmission and reflection, spectral absorption, atomic emission spectroscopy, irradiance, absorbance, and color measurement. The HP-3010 fiber spectrometer uses a thoroughly optimized crossed asymmetric C-T optical path for high spectral resolution. Its distinctive stray-light suppression and low-noise circuit design provide excellent noise control, making it ideal for ultraviolet, visible, and near-infrared spectroscopy. The HP-3010 fiber spectrometer is compact, highly consistent, stable, and reliable. Wavelength range and optical resolution can be customized, and multiple trigger modes and secondary development support flexible application expansion.
-
Ultrabroadband Scanning Ti:Sapphire Laser Spectrometers Spectra-line
Wavelength range: 275-1100nm Wavelength range: (275-350 nm/350-550 nm/550-700 nm/700-1100 nm) Linewidth [depends on spectral range]: 1-6 GHz(depends on spectral range)
The fully automatic narrow-linewidth (<1GHz), ultrawide continuous-tuning system originates from intelligent tunable spectroscopy in nanotechnology. Advanced laser-component design combines Ti:sapphire and dye lasers with intracavity doubling for 275nm-1100nm coverage. Puxian Technology supplies Tekhnoscan-customized systems for spectral calibration, laser spectroscopy, and materials-science research.
Related Articles
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
Loading...
Name
Phone
Organization
Use Case
Database Platform