Back-Illuminated Area-Array Spectrometers PG2000-EVO-EX
The PG2000-EVO spectrometer uses a Hamamatsu area-array back-illuminated CCD, improving ultraviolet sensitivity by approximately 7 times compared with PG2000. A 280 & 760nm dual-blaze grating and LVF higher-order suppression filter on a 100.0mm focal-length optical platform provide balanced sensitivity and high resolution over 200~1100nm. Suitable for research such as luminescent material characterization and industrial inspection such as broadband rapid screening.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Spectral Model - Spacing [Single channel] | 0.45 nm |
| Spectral Model - Resolution [Single channel; 10μm slit; typical value with 20% allowable deviation; FWHM] | 0.92 nm |
| Spectral Model - Resolution [Single channel; 25μm slit; typical value with 20% allowable deviation; FWHM] | 1.11 nm |
| Spectral Model - Resolution [Single channel; 50μm slit; typical value with 20% allowable deviation; FWHM] | 1.94 nm |
| Spectral Model - Resolution [Single channel; 100μm slit; typical value with 20% allowable deviation; FWHM] | 3.53 nm |
| Spectral Model - Resolution [Single channel; 200μm slit; typical value with 20% allowable deviation; FWHM] | 6.55 nm |
| Spectral Performance - Detection Range [Depends on the grating] | 200~1100nm，具体视光栅而定 |
| Spectral Performance - Wavelength Resolution | As fine as 0.07nm, based on an 1800-line grating; see Technical Parameters for details |
| Spectral Performance - Optical Resolution | As fine as 0.12nm (FWHM), based on an 1800-line grating and a 10μm slit; see Technical Parameters for details |
| Spectral Performance - Detector | Hamamatsu, 2048×64 pixels, area-array back-illuminated CCD |
| Spectral Performance - Higher-Order Diffraction Elimination | 3 front and 4 rear filter options to eliminate ghost lines in the spectrum |
| Spectral Performance - Optical Bench | Focal length 100mm, f-number 4.5, crossed C-T optical path |
| Spectral Performance - Integration Time | 6ms ~ 30s |
| Spectral Performance - Dynamic Range | ≥16000:1 |
| Spectral Performance - Signal-to-Noise Ratio | ≥600:1 |
| Spectral Performance - Stray Light | < 0.5% |
| Spectral Performance - Corrected Linearity | ≥99% |
| External Interfaces - Fiber Interface | SMA905 |
| External Interfaces - Data Transmission | USB2.0（Type-B） |
| External Interfaces - Expansion Function Port | 30 pin expansion port, supports Fuxiang BreakOut-Board external expansion |
| External Interfaces - External Trigger | 4 trigger modes: Normal / Level / Edge / Synchronization |
| Other - Dimensions | 157 mm³ × 115 mm³ × 44 mm³ |
| Other - Weight | 1kg |
| Other - A/D Bit Depth | 16-bit |
| Other - Power Consumption | 2.5W @ 5V DC |
| Other -ExtremeDR™ Technology | New-generation electrical platform fully optimizes noise suppression and signal acquisition |
| Other -StrayAbs™ Technology | Upgraded optical platform for stray-light suppression and replaceable slits |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
Online In-Situ Fluorescence Spectrometer InView-PL Spectrometers Ideaoptics
Fluorescence Spectra [450nm Excitation ; Customizable]: 450nm Excitation,600~1100nm Fluorescence Detection Band(Customizable) Absorption Spectrum: 400~1100nm Spectral Resolution(Cooled): ~5nm
InView-PL is an online, in-situ fluorescence spectrometer for monitoring photovoltaic thin-film formation. It can be integrated with spin-coating, VCD, annealing, and film-aging equipment to monitor PL, absorption, and scattering signals in real time during film formation, crystallization, and aging. This helps researchers understand crystallization rates and phase-transition dynamics, optimize conditions, control crystallization, improve crystal quality, and increase device efficiency and stability.
-
Agilent CARY5000 Spectrometers DCGD
-
Agilent CARY7000 Spectrometers DCGD
-
HP-3010 200-1100nm Low-Noise Miniature Fiber Spectrometer Spectrometers Hhitgroup
Detector - Detector Type: Linear Array (CMOS) Detector - Effective Pixels: 2048 Detector - Pixel Size: 14μmx 200μm
The HP-3010 miniature spectrometer is a new low-noise miniature fiber spectrometer developed by Hhitgroup. The HY-3010 uses a high-sensitivity CMOS linear-array sensor covering the 200-1100nm wavelength range, with high sensitivity and extremely low noise. Applications include geographic spectral-data acquisition, water reflectance acquisition, transmission and reflection, spectral absorption, atomic emission spectroscopy, irradiance, absorbance, and color measurement. The HP-3010 fiber spectrometer uses a thoroughly optimized crossed asymmetric C-T optical path for high spectral resolution. Its distinctive stray-light suppression and low-noise circuit design provide excellent noise control, making it ideal for ultraviolet, visible, and near-infrared spectroscopy. The HP-3010 fiber spectrometer is compact, highly consistent, stable, and reliable. Wavelength range and optical resolution can be customized, and multiple trigger modes and secondary development support flexible application expansion.
-
Ultrabroadband Scanning Ti:Sapphire Laser Spectrometers Spectra-line
Wavelength range: 275-1100nm Wavelength range: (275-350 nm/350-550 nm/550-700 nm/700-1100 nm) Linewidth [depends on spectral range]: 1-6 GHz(depends on spectral range)
The fully automatic narrow-linewidth (<1GHz), ultrawide continuous-tuning system originates from intelligent tunable spectroscopy in nanotechnology. Advanced laser-component design combines Ti:sapphire and dye lasers with intracavity doubling for 275nm-1100nm coverage. Puxian Technology supplies Tekhnoscan-customized systems for spectral calibration, laser spectroscopy, and materials-science research.
Related Articles
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform