High-Sensitivity Raman Spectrometers K-Sens-532H
The K-Sens Raman spectrometer uses On-chip cooling technology and a Back Thinned CCD, increasing sensitivity by 10X and reducing dark noise by 80%. Its specially designed open architecture accommodates liquid, solid, and powder samples. A DPS collimated-light adapter allows it to be combined with a commercial microscope to quickly create a microscopic Raman system. This provides stronger performance with broader and more flexible sample compatibility.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Spectral Model - Spacing [Matrix interval unit retained as nm from the source] | 1.69 nm |
| Spectral Model - Resolution [10μm slit; typical resolution, with an actual allowable deviation of 20%; FWHM] | 4.0 nm |
| Spectral Model - Resolution [25μm slit; typical resolution, with an actual allowable deviation of 20%; FWHM] | 5.0 nm |
| Laser Wavelength | 532.0±0.5nm |
| Laser Linewidth | better than 0.1nm |
| Laser Power | 0~100mW，连续调节 |
| Detector | Hamamatsu, S7031, 64×1044 pixels, 64-row back-illuminated, peak quantum efficiency 95% |
| Cooling Range | On-chip cooling, maximum cooling to 40℃ below ambient temperature, e.g. maximum cooling to -20℃ at 20℃ room temperature |
| Signal-to-Noise Ratio | 1,000:1, significantly better than comparable products |
| Dynamic Range | 10,000:1, active dark-noise suppression technology |
| Integration Time | 4ms ~ 15min, ultralong integration for detecting weaker signals |
| Raman Probes - Focal Length | 7.5mm・collimated light ∞ output |
| Raman Probes - Port | Metal Ferrel at sample end, outer diameter 9.5mm ◎ SMA905 interface at spectrometer end ◎ FC interface at laser end |
| Microspectroscopy | Compatible with the DPS collimated-light adapter |
| Data Transmission | USB-B, supports USB2.0 communication protocol, 480Mbps transfer speed |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Online In-Situ Fluorescence Spectrometer InView-PL Spectrometers Ideaoptics
Fluorescence Spectra [450nm Excitation ; Customizable]: 450nm Excitation,600~1100nm Fluorescence Detection Band(Customizable) Absorption Spectrum: 400~1100nm Spectral Resolution(Cooled): ~5nm
InView-PL is an online, in-situ fluorescence spectrometer for monitoring photovoltaic thin-film formation. It can be integrated with spin-coating, VCD, annealing, and film-aging equipment to monitor PL, absorption, and scattering signals in real time during film formation, crystallization, and aging. This helps researchers understand crystallization rates and phase-transition dynamics, optimize conditions, control crystallization, improve crystal quality, and increase device efficiency and stability.
-
Agilent CARY5000 Spectrometers DCGD
-
Agilent CARY7000 Spectrometers DCGD
-
HP-3010 200-1100nm Low-Noise Miniature Fiber Spectrometer Spectrometers Hhitgroup
Detector - Detector Type: Linear Array (CMOS) Detector - Effective Pixels: 2048 Detector - Pixel Size: 14μmx 200μm
The HP-3010 miniature spectrometer is a new low-noise miniature fiber spectrometer developed by Hhitgroup. The HY-3010 uses a high-sensitivity CMOS linear-array sensor covering the 200-1100nm wavelength range, with high sensitivity and extremely low noise. Applications include geographic spectral-data acquisition, water reflectance acquisition, transmission and reflection, spectral absorption, atomic emission spectroscopy, irradiance, absorbance, and color measurement. The HP-3010 fiber spectrometer uses a thoroughly optimized crossed asymmetric C-T optical path for high spectral resolution. Its distinctive stray-light suppression and low-noise circuit design provide excellent noise control, making it ideal for ultraviolet, visible, and near-infrared spectroscopy. The HP-3010 fiber spectrometer is compact, highly consistent, stable, and reliable. Wavelength range and optical resolution can be customized, and multiple trigger modes and secondary development support flexible application expansion.
-
Ultrabroadband Scanning Ti:Sapphire Laser Spectrometers Spectra-line
Wavelength range: 275-1100nm Wavelength range: (275-350 nm/350-550 nm/550-700 nm/700-1100 nm) Linewidth [depends on spectral range]: 1-6 GHz(depends on spectral range)
The fully automatic narrow-linewidth (<1GHz), ultrawide continuous-tuning system originates from intelligent tunable spectroscopy in nanotechnology. Advanced laser-component design combines Ti:sapphire and dye lasers with intracavity doubling for 275nm-1100nm coverage. Puxian Technology supplies Tekhnoscan-customized systems for spectral calibration, laser spectroscopy, and materials-science research.
Related Articles
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform