β-BBO

β-BBO

Supplier
Zcoptic
Category
Optical Crystals
Origin
China

β-BBO is a negative uniaxial nonlinear crystal with ordinary index n_o > extraordinary index n_e. Angle tuning provides type-I/type-II phase matching for harmonic generation,OPO/OPA and electro-optic uses.

Specification Snapshot
Parallelism
20″
Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

β-BBO is a negative uniaxial nonlinear crystal with ordinary index n_o > extraordinary index n_e. Angle tuning provides type-I/type-II phase matching for harmonic generation,OPO/OPA and electro-optic uses.

Specifications

ParameterValue
Crystal StructureTrigonal Crystal System, Space Group R3c
Unit Cell Parametersa=b=12.532 Å,c=12.717 Å,Z=6
Melting PointApproximately 1095 ℃
Mohs Hardness4 Mohs
Density3.85 g/cm³
Thermal Conductivity1.2 W/m/K(⊥c);1.6 W/m/K(∥c)
Coefficient of Thermal Expansionα₁₁=4×10⁻⁶ /K,α₃₃= 36×10⁻⁶ /K
Transmission Band190-3500 nm
SHG Phase-Matching Range409.6-3500 nm(TypeⅠ) 525-3500 nm(TypeⅡ)
Thermo-Optic Coefficientdnₒ/dT=-16.6×10⁻⁶ /℃ dnₑ/dT=-9.3×10⁻⁶ /℃
Absorption Coefficient<0.1%/cm @ 1064 nm, <1%/cm @ 532 nm
Acceptance Angle0.8 mrad·cm (θ, TypeⅠ,1064 SHG) 1.27 mrad·cm (θ, TypeⅡ,1064 SHG)
Temperature Bandwidth55 ℃·cm
Acceptance Spectral Bandwidth1.1 nm·cm
Walk-Off Angle2.7° (TypeⅠ,1064 SHG) 3.2° (TypeⅡ,1064 SHG)
Nonlinear Optical Coefficientsdeff(Ⅰ)=d₃₁sinθ+(d₁₁cos3Ф-d₂₂sin3Ф)cosθ deff(Ⅱ)=(d₁₁sin3Ф+d₂₂cos3Ф)cos2θ
Nonzero Nonlinear Optical Coefficientsd₁₁=5.8×d36(KDP)=2.55 pm/V d₃₁=0.05×d₁₁ d₂₂<0.05×d₁₁
Sellmeier Equation(λ in μm)nₒ² = 2.7359 + 0.01878 / (λ² - 0.01822) - 0.01354 λ² nₑ² = 2.3753 + 0.01224 / (λ² - 0.01667) - 0.01516 λ²
Electro-Optic Coefficientγ₂₂=2.7 pm/V
Half-Wave Voltage [1064 nm;3×3×20 mm³]7 KV(@ 1064 nm,3×3×20 mm³)
Electrical Resistivity˃1011 ohm•cm
Relative Dielectric Constantɛ^s₁₁/ɛₒ: 6.7 ɛ^s₃₃/ɛₒ: 8.1 Tanδ<0.001
Dimensional Tolerance [L≥2.5 mm](W±0.1 mm)×(H±0.1 mm)×(L+0.5/-0.1 mm)
Dimensional Tolerance [L<2.5 mm](W±0.1 mm)×(H±0.1 mm)×(L+0.1/-0.1 mm)
Effective Clear Aperture90% Central Area
Internal QualityNo Visible Scattering Path or Center when Tested with 50 mW Green Light
Surface Finish [With Reference to Standard MIL-PRF-13830B]10/5, with Reference to Standard MIL-PRF-13830B
Flatness [633 nm]≤λ/8 @ 633 nm
Transmitted Wavefront Distortion [633 nm]≤λ/8 @ 633 nm
Parallelism20″
Perpendicularity15′
Angle Tolerance≦0.25°
Chamfer [45°]≦0.2 mm×45°
Edge Chipping≦0.1 mm
Damage Threshold>1.5 GW/cm² @1064 nm, 10 ns, 10 Hz (Polished Optic); >1 GW/cm² @1064 nm, 10 ns, 10 Hz (Antireflection Coating); >0.3 GW/cm² @532 nm, 10 ns, 10 Hz (Antireflection Coating)
Minimum Crystal Thickness0.005 mm
Maximum Crystal Length25 mm
Maximum Crystal Dimensions15 mm³ × 15 mm³ × 15 mm³
Optical Homogeneityδn≈10-6 /cm
Available Z-Cut BBO Crystal Length [Electro-Optic Applications]25 mm
Thickness along the Electrode Direction [Z-Cut BBO Crystal Available; Electro-Optic Applications]1 mm
Coating Technology [Selected according to customer application requirements]IBS or IAD
Coating Stack [Second-, Third-, and Fourth-Harmonic Generation of 1064 nm]Low-Reflectance Antireflection Coatings for Two or Three Wavelengths
Coating Stack [Tunable Frequency-Doubled Laser]Broadband antireflection coating (BBAR)
Coating Stack [OPO Using BBO Crystals]Broadband Protective Coating
Side-Surface Coating [Z-Cut BBO Crystal Available; Electro-Optic Applications]Gold/Chromium

Applications

Nd:YAG harmonic cases:SHG>70%,THG60%,fourth50%;fifth at213nm up to200mW. AR-coated intracavity BBO in acousto-optically Q-switched Nd:YAG gives>15W average at532nm. With600mW mode-locked Nd:YLF SHG pumping,external doubling in Brewster-cut BBO gives66mW at263nm. Small angular acceptance/large walk-off require good fundamental mode and low divergence;focusing the fundamental beam is not recommended. Dye lasers:type-I SHG>10% for UV≥206nm(the source lists205-310nm). XeCl-pumped dye laser at150KWpeak yields36% conversion,about4-6×ADP;shortest204.97nm SHG gives~1%. Sum-frequency mixing780-950nm with248.5nm(the SHG of495nm dye light)gives188.9-197nm UV,including95mJ at193nm and8mJ at189nm. Ultrashort pulses:BBO SHG/THG is described as outperformingKDP/ADP;0.005mm thin crystals can double10fs pulses when phase/group velocities match. Alexandrite:type-I SHG360-390nm with105mJ at378nm and31% conversion;THG244-259nm with7.5mJ and24% mixing conversion. Ti:sapphire SHG can exceed50%,with efficient THG/fourth harmonics. Argon-ion:2W all-line output with intracavity Brewster-cut BBO gives36deep-UV lines228.9-257.2nm,maximum33mW at250.4nm. Copper vapor:510.6nm doubling gives230mW mean at255.3nm and8.9% maximum conversion. OPO/OPA provide UV-to-NIR tunable coherent light;type-I/type-II tuning curves are referenced without deriving extra values.532nm OPO case:40mJ,75ps pump and7.2mm type-I BBO yield680-2400nm,1.6MWpeak and30% conversion;longer crystals increase conversion.355nm OPO case:tuning400-3100nm,18-30% energy conversion across430-2000nm. Type-II BBO can narrow linewidth to0.05nm at12% conversion;length>15mm commonly reduces threshold.355nm picosecond Nd:YAG-pumped OPA gives<0.3nm bandwidth,>200µJ and400-2000nm tuning,maximum conversion>50%;compared with dye lasers it offers efficiency,tuning,easy maintenance/simple design/operation. Adding BBO SHG toBBO-OPO/OPA gives205-3500nm tuning. Other cases:308nm XeCl-pumped angle-tuned type-I OPO yields422-477nm signal;266nm Nd:YAG-fourth-harmonic-pumped OPO reportedly yields330-1370nm. A615nm,1mJ,80fs dye pump with twoBBOcrystals gives800-2000nm,>50µJ(max130µJ),<200fs. Electro-optic uses:UV-to3500nm transparency and damage threshold higher thanDKDP/LiNbO3. BBO electro-optic material withNd:YVO4gain is described as exceeding100W and1000kHz;at5kHz,the text gives6.4ns,5.7mJ or900kWpeak. Advantages over acousto-optic Q-switching include short pulses,beam quality and compactness. Small E-O coefficient/high half-wave voltage(example3×3×20mm3,7kV at1064nm)can be addressed by greater length/smaller electrode-direction thickness. Offered Z-cut BBO up to25mm long and1mm electrode-direction thickness,withAR and side gold/chromium coatings. Different cases/frequencies are not merged into one current-product rating. Second-, third-, fourth-, and fifth-harmonic generation of Nd:YAG lasers; frequency doubling of dye, ultrashort-pulse, Ti:sapphire, alexandrite, argon-ion, and copper-vapor lasers; OPO and OPA; electro-optic Q-switching.

Key Features

Phase matching409.6-3500nm;transmission190-3500nm;SHG conversion efficiency described as6×KDP,high damage threshold and homogeneityδn≈10-6/cm. The source labels a “temperature acceptance angle” of~55℃;its angle/temperature wording is not corrected. Crystal thickness down to0.005mm,length up to25mm,maximum size15×15×15mm³. Quality control,AR/protective coatings,mounting,repolishing/recoating,stock supply;15working-day polished and20working-day coated delivery. IBS/IAD coating options:dual/triple-band low-R AR for1064nm second/third/fourth harmonics,BBAR for tunable-laser doubling,broad protective coating for OPO. High damage threshold,long life,custom coatings. Hygroscopic:keep dry;low hardness and polished surfaces require careful handling. Small acceptance angle requires fine adjustment. Custom specifications based on pulse energy,width,repetition,CW power,beam diameter,mode,divergence and tuning range. Free mounts for thin crystals;one-year warranty under normal use.

Datasheet

Please provide your email to download the datasheet.

Your name
Email Address

Invalid email format. Please try again.

Send Request

Supplier Information

Zc
Zcoptic
View Supplier →
Fujian Zhongce Optoelectronics Co., Ltd. was established at the end of 2007. It is a high-tech certified enterprise specializing in the design, production, and sales of optical communication components. It has passed ISO9001-2015 international quality system, ISO14000-2004 international environmental management system, and GB/T29490-2013 intellectual property management system certifications. It is the first domestic enterprise mainly engaged in optical communication crystal component materials to be listed on the OTC exchange. Zhongce Optoelectronics is dedicated to providing customers with full supply chain services including crystal blanks, optical cold processing, optical devices, and optical coatings. To date, the company has developed: C/G-lens, KTP wafers, TGG rods, PBS polarizing beam splitters, fiber collimators, lithium niobate (LiNbO3), yttrium vanadate (YVO4), quartz waveplates, optical isolator cores, optical isolators, optical circulator cores, and other cost-effective optical communication components and laser crystals. The company's optical isolator cores and in-line isolators fully leverage the design and processing advantages of its own optical components, maintaining an advanced level in product development and technological innovation. Experienced optical design and device packaging engineers can provide customers with various solutions. The company actively undertakes external cooperation, establishes OEM strategic partnerships with domestic and international customers, and strives to become an excellent supplier for the optical communication industry and passive optical device manufacturers!

Request a Quote

Our team responds within 24–48 hours
β-BBO
Zcoptic · Optical Crystals
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →