KTP
Potassium titanyl phosphate(KTiOPO4,KTP) is an efficient frequency-doubling crystal used in commercial and scientific lasers,including laboratory,medical,rangefinding,lidar,optical communications and industrial systems.
Specification Snapshot
Parallelism
20″
Request a Quote
Download Datasheet
Overview
Potassium titanyl phosphate(KTiOPO4,KTP) is an efficient frequency-doubling crystal used in commercial and scientific lasers,including laboratory,medical,rangefinding,lidar,optical communications and industrial systems.
Specifications
| Parameter | Value |
|---|---|
| Crystal Structure | Orthorhombic Crystal System, Space Group Pna21, Point Group mm2 |
| Unit Cell Parameters | a=6.404 Å,b=10.616 Å,c=12.814 Å,Z=8 |
| Melting Point | Approximately 1172 ℃ |
| Mohs Hardness | 5 Mohs |
| Density | 3.01 g/cm³ |
| Thermal Conductivity | 13 W/m/K |
| Coefficient of Thermal Expansion | αx=11×10⁻⁶ /℃, αy=9×10⁻⁶ /℃, αz=0.6×10⁻⁶ /℃ |
| Transmission Range | 350-4500 nm |
| SHG Phase-Matching Range | 497-1800 nm (Type Ⅱ) |
| Thermo-Optic Coefficient (λ in μm) | dnx/dT=1.1×10⁻⁵ /℃ dny/dT=1.3×10⁻⁵ /℃ dnz/dT=1.6×10⁻⁵ /℃ |
| Absorption Coefficient | <0.1%/cm @ 1064 nm,<1%/cm @ 532 nm |
| Temperature Bandwidth [1064 nm Nd:YAG Laser Type-II SHG] | 24 ℃·cm |
| Acceptance Spectral Bandwidth [1064 nm Nd:YAG Laser Type-II SHG] | 0.56 nm·cm |
| Acceptance Angle [1064 nm Nd:YAG Laser Type-II SHG] | 14.2 mrad•cm(Φ);55.3 mrad•cm(θ) |
| Walk-Off Angle [1064 nm Nd:YAG Laser Type-II SHG] | 0.55° |
| NLO Coefficient | deff(Ⅱ)≈(d24- d15)sin2Φsin2θ-(d15sin2Φ+d24cos2Φ)sinθ |
| Nonzero Nonlinear Optical Coefficients | d31=6.5 pm/V d24=7.6 pm/V d32=5 pm/V d15=6.1 pm/V d33=13.7 pm/V |
| Sellmeier Equation (λ in μm) | nx2 = 3.0065 + 0.03901 / (λ2 - 0.04251) - 0.01327 λ2 ny2 = 3.0333 + 0.04154 / (λ2 - 0.04547) - 0.01408 λ2 nz2 = 3.3134 + 0.05694 / (λ2 - 0.05658) - 0.01682 λ2 |
| Electro-Optic Coefficient r13 [Low frequency] | 9.5 pm/V |
| Electro-Optic Coefficient r13 [High frequency] | 8.8 pm/V |
| Electro-Optic Coefficient r23 [Low frequency] | 15.7 pm/V |
| Electro-Optic Coefficient r23 [High frequency] | 13.8 pm/V |
| Electro-Optic Coefficient r33 [Low frequency] | 36.3 pm/V |
| Electro-Optic Coefficient r33 [High frequency] | 35.0 pm/V |
| Electro-Optic Coefficient r51 [Low frequency] | 7.3 pm/V |
| Electro-Optic Coefficient r51 [High frequency] | 6.9 pm/V |
| Electro-Optic Coefficient r42 [Low frequency] | 9.3 pm/V |
| Electro-Optic Coefficient r42 [High frequency] | 8.8 pm/V |
| Dielectric Constant | ɛeff=13 |
| Available Crystal Dimensions [Up to] | 20×20×40 mm3 |
| Available Crystal Length [Up to] | 60 mm |
| Optical Frequency Bandwidth [Electro-Optic Device Applications] | >15 GHz |
| Coating Stack [For frequency doubling of 1064nm] | Dual-Wavelength Antireflection Coating AR-1064/532nm |
| Reflectance [AR-1064/532nm;1064 nm] | <0.2% |
| Reflectance [AR-1064/532nm;532 nm] | <0.5% |
| Reflectance [HR-1064 nm&HT-532 nm;1064 nm] | >99.8% |
| Transmission [HR-1064 nm&HT-532 nm;532 nm] | >90% |
| Coating Stack [For OPO Using KTP Crystals] | Broadband antireflection coating (BBAR-coating) or protective coating (P-coating) |
| Coating Laser-Induced Damage Threshold [1064/532 nm] | >300 MW/cm2 |
| Dimensional Tolerance [L≥2.5 mm] | (W±0.1 mm)×(H±0.1 mm)×(L+0.5/-0.1 mm) |
| Dimensional Tolerance [L<2.5 mm] | (W±0.1 mm)×(H±0.1 mm)×(L+0.1/-0.1 mm) |
| Effective Clear Aperture [Central Region] | 90% Central Area |
| Internal Quality | No Visible Scattering Path or Center when Tested with 50 mW Green Light |
| Surface Finish [With Reference to Standard MIL-PRF-13830B] | 10/5, with Reference to Standard MIL-PRF-13830B |
| Flatness [633 nm] | ≦λ/8 @ 633 nm |
| Transmitted Wavefront Distortion [633 nm] | ≦λ/8 @ 633 nm |
| Parallelism | 20″ |
| Perpendicularity | ≦15′ |
| Angle Tolerance | ≦0.25° |
| Chamfer [45°] | ≦0.2 mm×45° |
| Edge Chipping | ≦0.1 mm |
| Damage Threshold | >1 GW/cm² @1064 nm, 10 ns, 10 Hz (Antireflection Coating); >0.3 GW/cm² @532 nm, 10 ns, 10 Hz (Antireflection Coating) |
Applications
Nd-laser doubling/mixing: KTP is widely used in Nd:YAG and other Nd lasers,especially at low/medium power density. Intracavity/extracavity doubled Nd lasers pump/amplify visible dye and tunable Ti:sapphire systems and serve as green sources. An injection-seeded Q-switched Nd:YAG case gives900mJ input and700mJ green output,near80% conversion; a15W LD-pumped Nd:YVO4 case gives8W green via intracavity KTP. Mixing810nm diode pumping and1064nm Nd:YAG produces blue; intracavity doubling1300nm Nd:YAG orNd:YAP produces red. OPA/OPO: described tuning spans600nm visible to4500nm mid-IR. The source explicitly prints108Hz repetition,not a reconstructed power of ten,for stable low-average-power fs signal/idler pulses.1064nm Nd:YAG pumping can yield2120nm with conversion>66%. Noncritical-phase-matched OPO/OPA:700-1000nm pumps,1040-1450nm signal,2150-3200nm idler,conversion>45%,high-quality narrow-band beams. Electro-optic uses: dielectric/insulating properties and effects comparable toLiNbO3 support tunable E-O devices; high damage threshold,bandwidth>15GHz,thermal/mechanical stability and low loss are described as promising for replacingLiNbO3 in volume E-O modulators. Waveguides: ion exchange in KTP gives low-loss integrated-optic guides. The source calls a type-II SHG result20%/W/cm2 obtained by “balanced phase matching”; that wording is not changed to quasi-phase matching. Segmented guides are described for type-I quasi-phase-matched SHG of tunable Ti:sapphire over760-960mm(the source unit remainsmm)and direct doubling in400-430nm-output diode lasers. Application-case energies,powers,wavelengths and efficiencies are not universal crystal ratings. Laboratory and medical laser systems; rangefinders; lidar; optical communications; industrial laser systems; frequency doubling and mixing of Nd-doped lasers; OPA/OPO; electro-optic modulators; optical waveguides.
Key Features
Large nonlinear and electro-optic coefficients,large acceptance angle with small walk-off,wide temperature/spectral bandwidth,low dielectric constant,high figure of merit,nonhygroscopic behavior and chemical/mechanical stability. Strict quality control; sizes up to20×20×40 mm3 and lengths up to60mm. Polished parts in15working days,coated parts in20working days; competitive prices,volume discounts and technical support. AR coating,mounting,repolishing/recoating. Coating options for1064nm SHG: AR1064/532 withR<0.2% at1064nm andR<0.5% at532nm; HR1064/HT532 withR>99.8% at1064nm andT>90% at532nm. BBAR or protective coatings for OPO; stated damage threshold>300MW/cm2 at1064/532nm,long life and custom coatings. One-year quality warranty under normal use.
Datasheet
Please provide your email to download the datasheet.
Your name
Email Address
Invalid email format. Please try again.
Send Request
Supplier Information
Fujian Zhongce Optoelectronics Co., Ltd. was established at the end of 2007. It is a high-tech certified enterprise specializing in the design, production, and sales of optical communication components. It has passed ISO9001-2015 international quality system, ISO14000-2004 international environmental management system, and GB/T29490-2013 intellectual property management system certifications. It is the first domestic enterprise mainly engaged in optical communication crystal component materials to be listed on the OTC exchange.
Zhongce Optoelectronics is dedicated to providing customers with full supply chain services including crystal blanks, optical cold processing, optical devices, and optical coatings. To date, the company has developed: C/G-lens, KTP wafers, TGG rods, PBS polarizing beam splitters, fiber collimators, lithium niobate (LiNbO3), yttrium vanadate (YVO4), quartz waveplates, optical isolator cores, optical isolators, optical circulator cores, and other cost-effective optical communication components and laser crystals. The company's optical isolator cores and in-line isolators fully leverage the design and processing advantages of its own optical components, maintaining an advanced level in product development and technological innovation. Experienced optical design and device packaging engineers can provide customers with various solutions.
The company actively undertakes external cooperation, establishes OEM strategic partnerships with domestic and international customers, and strives to become an excellent supplier for the optical communication industry and passive optical device manufacturers!
Contact Us
Loading...
GetExperimental Plan
Name
Phone
+86
Organization
Use Case

Global Photonics Products
Database Platform
Database Platform
With 16 years of experience, we provide high-quality products and services to universities, research institutes, and industry.
50+ Detailed Categories · 3,000+ Global Brands · 100,000+ Photonics Products
1 Million+
In-depth analysis of professional academic resources in photonics
300,000
ProductsDatasheets Available Free
We will keep your personal information strictly confidential.
Product Quote
+86
* Select the quoting party:
By submitting, you agree to the User Service Agreement and Privacy Policy