C-Band Erbium-Doped Fiber Preamplifier (Single-Mode/Polarization-Maintaining) MFAS-Er-C-B-PA
Shanghai Hanyu’s MARS-series C-band preamplifier EDFAs provide high gain and low noise for weak-signal preamplification, increasing receiver sensitivity and transmission distance. An optimized erbium-doped fiber-laser optical path with a telecommunications-grade 980nm single-mode pump laser provides small-signal amplification. Microprocessor control and high-precision ATC and ACC(APC) circuits stabilize output and make operation quick and intuitive. Built-in drive and logic-control circuits monitor input/output optical power, pump-laser temperature, module temperature and signal gain in real time. Host software adjusts and monitors all status and configuration parameters. Desktop and module packages meet different application needs.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Wavelength Range | min:1528 nm; typical:1550 nm; max:1560 nm |
| Input Optical Power | min:-40 dBm; max:-10 dBm |
| Output Optical Power | typical:10 dBm |
| Minimum Gain | min:30 dB |
| Noise | max:5 dB |
| Input/Output Optical Isolation | min:30 dB; typical:35 dB |
| Output Power Adjustment Range | min:0 %; max:100 % |
| Output Power Adjustment Mode | Coarse/Fine Adjustment |
| Operating Voltage (Benchtop) [AC / Benchtop] | min:100 V; typical:220 V; max:240 V |
| Operating Voltage (Module) [DC/Module] | 5 V |
| Electrical Power Consumption | max:2 W |
| Operating Temperature | min:0 ℃; max:30 ℃ |
| Storage Temperature | min:-40 ℃; max:85 ℃ |
| Fiber Type | SMF-28 Single-Mode Fiber |
| Fiber Length | > 1 m |
| Connector Model | FC/APC, Other Models Optional |
| Dimensions [Benchtop] | 420(L)×485(W)×105(H) |
| Dimensions [Module] | 90(L)X70(W)X15(H) |
Applications
Datasheet
Supplier Information
Related Products
-
025 semiconductor optical fiber amplifier SOA Fiber Optic Amplifiers Wanshuo
Operating Wavelength Range: min:1290 nm; max:1330 nm Input optical-power range: min:-20 dBm; typical:-6 dBm; max:+6 dBm Output optical-power range: min:-2 dBm; typical:8 dBm; max:10 dBm
This product primarily uses a semiconductor optical laser for O-band optical power amplification. Its high-speed all-optical amplification mode is particularly suitable for high-speed signal amplification, such as in 100G communications systems and optical fiber sensing.
-
028 Mini EDFA Fiber Optic Amplifiers Wanshuo
Operating Wavelength Range: min:1528 nm; typical:1550.12 nm; max:1565 nm Input optical-power range: min:-15 dBm; typical:-12 dBm; max:+5 dBm Output optical-power range: min:6 dBm; typical:10 dBm; max:18 dBm
This ultra-compact amplification module is designed for single-channel or narrowband signal amplification, supporting output power up to 18dBm and ACC and APC control modes.
-
055 high-power EYDFA optical fiber amplifier Fiber Optic Amplifiers Wanshuo
Wavelength Range: min:1540 nm; max:1565 nm Number of Channels: typical:1 Input Optical Power: min:-10 dBm; max:+10 dBm
High-power EYDFA uses a two-stage amplification structure with optical output power up to 37dBm and APC, ACC and AGC control modes. It operates well across a wide temperature range.
-
Standard-size inline isolator Fiber Optic Amplifiers Adfiber
Single-pole / P grade - Operating wavelength: 1310 or 1550 or Customized Single-pole / P grade - Typical isolation (@23℃) [@23℃；@23℃)]: min:40 dB Single-pole / P grade - Isolation (@23℃) [@23℃；@23℃)]: min:30 dB
Inline optical isolators are generally used in communications lines and EDFA because optical polarization in the line is unstable, requiring low polarization-dependent loss. Advanced manufacturing provides stable mechanical, physical and optical properties, high isolation and low insertion loss.
-
Tera4000 O-band semiconductor amplifier Fiber Optic Amplifiers Terawan
Gain bandwidth range [Performance parameter table; Typical operation 1280~1310nm]: 1270~1350 nm Typical operating wavelength [Typical operation]: 1280~1310 nm Output Optical Power [Performance Parameter Table]: +2~+10 dBm
The Tera4000 LAN WDM semiconductor amplifier serves O-band 100GE amplification and all-optical SDH relaying, with a gain band of 1270~1350nm. A standard 19-inch 1U rack chassis supports up to 4 channels, configurable as 1, 2, 3, or 4 channels.
Related Articles
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
Loading...
Name
Phone
Organization
Use Case
Database Platform