High-repetition-rate lidar ranging module 200A LRF200A
Model: LRF200A. The LRF200A provides precise, long-range lidar measurement indoors and outdoors. It supports positioning and collision prevention for shuttles, land vehicles, overhead cranes and lateral-moving vehicles. LRF200A measures stably on very dark or bright materials for logistics applications such as thrust control, rack occupancy and cargo-height monitoring. Compact size and strong performance support varied environments.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| 激光波长 | Laser diode 905nm, ≤10mW; Class I laser eye-safety requirements |
| 光斑区域 | 20×10cm（100m） |
| 重量 | ＜50g |
| 电源电压 | 24V（9V~36V） |
| 规格范围 | 0.05-50m 0.05-100m 0.05-150m 0.05-200m |
| 测量精度 | ±0.05m ±0.05m + (L-50) × 0.1%, where L is the measurement distance |
| 标准测量范围 [@80% 反射率与可见度 > 10km] | 0.05m ~ 200m @80% reflectance and visibility >10km |
| 距离分辨率 | 1cm |
| 绝对精度 [@50m] | ±0.05m@50m |
| 数据接口 | 3.3V TTL serial port output |
| 测量频率 | 20-20kHz (default 1kHz) |
| 回波数据 | Direct measurement of distance, reflected-light intensity, and operating status |
| 工作温度 | －40℃~ +85℃ |
| 储存温度 | －45℃~ +100℃ |
| 工作湿度 | 0%~100% RH |
| 抗环境光 | ＞100kLux |
Datasheet
Supplier Information
Related Products
-
Butterfly-packaged avalanche photodiode for lidar APD
LiDAR
Szsbksgdkjyxgs
波长范围 λ: min:1100 nm；max:1700 nm 探测面积 Φ: typical:50 um 响应度 R [Vr=0V, λ=1550nm]: min:0.85 A/W
This APD photodiode series uses high-performance APD semiconductor chips. The temperature-control circuitry and butterfly package with a built-in thermoelectric cooler keep the APD chip stable across ambient temperatures, greatly simplifying APD power-supply and weak-signal detection circuitry.
-
For lidar 14pin Package 1570nm 10mW Distributed feedback laser
LiDAR
Szsbksgdkjyxgs
中心波长 λc [TL=15～35ºC CW]: min:1568 nm；typical:1570 nm；max:1572 nm 输出功率 P_O: min:10 mW 光谱线宽 LW [全波半波(FWHM)]: typical:2 MHz
Semiconductor lasers offer low power consumption and high output and are suitable for optical systems.
-
Domestic 1510nm TO56 Packaged continuous-wave semiconductor laser for lidar
LiDAR
Szsbksgdkjyxgs
阈值电流 Iₜₕ [CW]: typical:7 mA；max:15 mA 阈值电流 Iₜₕ [CW,TC=85℃]: max:40 mA 输出功率 P_O [CW, If=Ith+20mA]: typical:6 mW
The DFB CWDM 1510nm is a DFB laser for CWDM analog communication, laboratory and research and development applications.
-
Wind-measurement lidar
LiDAR
Startin-optronics
This series uses pulsed-laser Doppler shifts and backscatter from atmospheric aerosols, including dust, salt crystals, cloud/fog droplets and pollutants, to continuously measure wind speed, direction and three-dimensional profiles. It provides real-time, high-resolution and accurate wind-field data. A compact all-fiber source supports retrieval of wind direction, speed and shear at different heights within 15000m. Reliable, accurate measurements serve airports, wind energy, meteorology, climate and atmospheric research, and low/mid-altitude wind sensing.
Related Articles
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Driven by fast‑growing demands of 3D perception, biometric authentication and machine‑vision industries, near‑infrared imaging optics have become a vital hardware component for intelligent sensing systems.
The ElFys PD25s series photodetectors adopt ElFys‑patented Black Silicon Induced Junction technology, delivering excellent spectral response spanning deep‑ultraviolet, visible and near‑infrared bands for diverse high‑precision photometry applications. Sub‑variants including H, M, HG and MG are optimised for low‑capacitance, low‑dark‑current and high‑reverse‑bias guard‑ring operations respectively. Multiple packaging configurations are available to satisfy various system‑design requirements.
Loading...
Name
Phone
Organization
Use Case
Database Platform