C Band erbium-doped fiber line amplifier
The C-band erbium-doped fiber line amplifier provides optical-power amplification for repeaters in fiber-laser or fiber-communications systems. Combining PA and BA amplifier advantages, it offers high small-signal gain and high output power with low noise. It extends repeater spacing between fiber sections or compensates splitting loss in point-to-multipoint optical access networks.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range [C-band] | typical:1530~1565 nm |
| Input Power | typical:-25 ~ -3 dBm |
| Saturated output power [@-10dBm Input] | typical:13/17/20/23/25/26 |
| Small-signal gain coefficient [@-25dBm Input] | typical:35 dB |
| Noise figure [@-10dBm Input] | typical:5.5 dB |
| Polarization-dependent gain | typical:≤0.3 dB |
| Polarization Mode Dispersion | typical:0.5 ps |
| Input/output port isolation | typical:>35 dB |
| Optical power monitoring | Input optical power monitoring; output optical power monitoring |
| Fiber and connector | SMF-28，FC/APC |
| Operating mode | ACC/APC/AGC |
| Control Method [Benchtop] | Touchscreen / RS232 serial communication |
| Control Method [Module] | RS232 serial communication |
| Communication Interface [Benchtop] | DB9 female connector |
| Communication Interface [Module / Optical power (dBm)：13 / Size or code ：M15] | ZH1.5-3Pin port |
| Communication Interface [Module / Optical power (dBm)：17 / Size or code ：M15] | ZH1.5-3Pin port |
| Communication Interface [Module / Optical power (dBm)：20 / Size or code ：M15] | ZH1.5-3Pin port |
| Communication Interface [Module / Optical power (dBm)：23 / Size or code ：M15] | ZH1.5-3Pin port |
| Communication Interface [Module / Optical power (dBm)：13 / Size or code ：M20] | DB9 female connector |
| Communication Interface [Module / Optical power (dBm)：17 / Size or code ：M20] | DB9 female connector |
| Communication Interface [Module / Optical power (dBm)：20 / Size or code ：M20] | DB9 female connector |
| Communication Interface [Module / Optical power (dBm)：23 / Size or code ：M20] | DB9 female connector |
| Communication Interface [Module / Optical power (dBm)：25 / Size or code ：M20] | DB9 female connector |
| Communication Interface [Module / Optical power (dBm)：26 / Size or code ：M20] | DB9 female connector |
| Power supply [Benchtop] | AC 100~240V |
| Power supply [Module] | DC 5V 15W |
| Optical Power [Benchtop / Size or code:B1] | 13 dBm |
| Optical Power [Benchtop / Size or code:B1] | 17 dBm |
| Optical Power [Benchtop / Size or code:B1] | 20 dBm |
| Optical Power [Benchtop / Size or code:B1] | 23 dBm |
| Optical Power [Benchtop / Size or code:B1] | 25 dBm |
| Optical Power [Benchtop / Size or code:B1] | 26 dBm |
| Optical Power [Module / Size or code ：M15] | 13 dBm |
| Optical Power [Module / Size or code ：M15] | 17 dBm |
| Optical Power [Module / Size or code ：M15] | 20 dBm |
| Optical Power [Module / Size or code ：M15] | 23 dBm |
| Optical Power [Module / Size or code ：M20] | 13 dBm |
| Optical Power [Module / Size or code ：M20] | 17 dBm |
| Optical Power [Module / Size or code ：M20] | 20 dBm |
| Optical Power [Module / Size or code ：M20] | 23 dBm |
| Optical Power [Module / Size or code ：M20] | 25 dBm |
| Optical Power [Module / Size or code ：M20] | 26 dBm |
| Heat dissipation Method [Benchtop] | Internal air cooling |
| Heat dissipation Method [Module] | Contact cooling |
| Operating Temperature | -5~+35°C |
| Operating Humidity | 0~70% |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
SA-1A-1310
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 50mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1A-1550
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 50mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1P-1310
Fiber Optic Amplifiers
Inxuntech
Pulse Peak power: 50mW Min Modulation Pulse width: 5ns Switching Extinction Ratio: 70dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-1P-1550
Fiber Optic Amplifiers
Inxuntech
Pulse Peak power: 50mW Min Modulation Pulse width: 5ns Switching Extinction Ratio: 70dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
-
SA-2A-1310
Fiber Optic Amplifiers
Inxuntech
Max Continuous Output optical power: 100mW Small-Signal Gain: 20dB Power stability: 0.1dB
Inxuntech's SOA optical amplification/pulse module is a high-performance SOA product combining an in-house epi structure, compound semiconductor chip technology, advanced packaging and low-noise circuit control.
Related Articles
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform