Picosecond deep-UV pulsed laser LP1600
The LP1600 picosecond deep-ultraviolet pulsed laser is increasingly used in biomedicine, optical parametric oscillation, biological microscopy, and related fields.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength | 177 nm |
| Pulse Repetition Rate | 80 MHz |
| Average Power | 50 μW |
| Pulse Width | 15 ps |
| Polarization | Linear polarization |
| Warm-up time | ~30 min |
Key Features
Datasheet
Supplier Information
Related Products
-
1500W Microwave Electrodeless UV Germicidal Lamp PS100
UV Light Systems
Szlamplic
Continuously Adjustable Input Power [Stepless Adjustment]: 600W—3000W Cooling method: Built-in fan cooling Power supply Input Voltage: AC220V
Introduction to the efficient microwave electrodeless sterilization lamp: This UV source emits light by ionizing a low-pressure gas in a high-energy microwave field. The lamp has neither filament nor electrodes; its evacuated quartz tube contains only a small amount of starting gas and luminescent material.
-
1500W Microwave Electrodeless UV Germicidal Lamp PS400
UV Light Systems
Szlamplic
Continuously Adjustable Input Power [Stepless Adjustment]: 1800W—4600W Cooling method: Built-in fan cooling Power supply Input Voltage: AC220V
Introduction to the efficient microwave electrodeless sterilization lamp: This UV source emits light by ionizing a low-pressure gas in a high-energy microwave field. The lamp has neither filament nor electrodes; its evacuated quartz tube contains only a small amount of starting gas and luminescent material.
-
300X100 Air Cooling UVLED Light Source
UV Light Systems
Szlamplic
The 300X100 air-cooled UVLED source directly generates UV using high-power LED chips proportionally integrated with emission from 200nm to 450nm, producing a selected peak wavelength in that range. Conventional curing machines appear bright and hot because their broad spectra include only a fraction useful for curing, with much visible stray light and heat that can damage eyes and deform workpieces. This UVLED area source emits high-purity monochromatic 365nm light as a cold source. Workpiece temperature rises only about 3 degrees without deformation. Energy is concentrated in the useful curing band, giving practical results comparable to a high-pressure mercury lamp with stated intensity 1000-2000MW. Edge-to-center irradiation variation is ≤3%, providing excellent uniformity.
-
UV LED Light Source Curing Lamp for Gravure Printing LPF24012
UV Light Systems
Szlamplic
Weight: 4.2 kg Dimensions: 244 mm × 130 mm × 250 mm Lighting Window: 240 mm × 12 mm
LAMPLIC's 3 gravure UV LED curing-source series use standard COB UV LED modules, DC-DC controls and aviation connectors. Controls include PLC 0~24V, 0~10V analog energy adjustment, ON/OFF, and optional 485, 232 or PWM. The 4 wavelength options are 365, 385, 395 and 405. Since 2016, LAMPLIC has researched UV LED gravure processing. Gravure's outstanding speed and quality have created a large global installed base, but traditional solvent inks cause severe air pollution, with VOCs exceeding 70% of ink use. The 100%-solids UV LED solution prints above 200m/minute with zero VOC emissions, addressing pollution at its source. Patented packaging/drive technology delivers irradiance of 40W/cm2 with high stability and reliability. The 3 series cover applications from small gravure-printed vest bags to high-speed flexible-packaging films, providing a new solution for gravure VOC control.
-
UV LED Light Source Curing Lamp for Gravure Printing LPF32012
UV Light Systems
Szlamplic
Weight: 5.6 kg Dimensions: 324 mm × 130 mm × 250 mm Lighting Window: 320**812mm
LAMPLIC's 3 gravure UV LED curing-source series use standard COB UV LED modules, DC-DC controls and aviation connectors. Controls include PLC 0~24V, 0~10V analog energy adjustment, ON/OFF, and optional 485, 232 or PWM. The 4 wavelength options are 365, 385, 395 and 405. Since 2016, LAMPLIC has researched UV LED gravure processing. Gravure's outstanding speed and quality have created a large global installed base, but traditional solvent inks cause severe air pollution, with VOCs exceeding 70% of ink use. The 100%-solids UV LED solution prints above 200m/minute with zero VOC emissions, addressing pollution at its source. Patented packaging/drive technology delivers irradiance of 40W/cm2 with high stability and reliability. The 3 series cover applications from small gravure-printed vest bags to high-speed flexible-packaging films, providing a new solution for gravure VOC control.
Related Articles
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform