Optical-Cable Fault Locator ZGGX-GLXZ-A1
The cable fault locator uses fibers for sensing and transmission, combining OTDR cable monitoring with fiber-laser interferometric vibration sensing. A dual-parameter composite sensing structure provides efficient, real-time online break detection and addresses the difficulty of matching break location and time with geographical position. It rapidly locates faults and surveys underground and overhead cables in varied installations.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Test Method | Single-fiber testing without loopback or any fiber treatment |
| Fiber type | Single-mode |
| Optical Connector | FC/APC |
| Red Light Power | 25mW |
| Dimensions | 293 mm × 205 mm × 65 mm |
| Screen | 7-Inch (LCD Screen) |
| Battery | 3000mAh（ Adapter ：12V1A） |
| OTDR Function - Operating wavelength | Min ：1548nm； Typical ：1550nm； Max ：1552nm |
| OTDR Function-Test Distance | Typical ：100km |
| Acoustics/Vibration-Operating Wavelength | Min ：1548nm； Typical ：1550nm； Max ：1552nm |
| Acoustics/Vibration-Test Distance | Typical ：100km |
| OTDR Function-Spatial Resolution | 1m |
| Acoustics/Vibration-Frequency Response Range | Min ：1Hz； Max ：20kHz |
| OTDR Function - Dynamic range | Min ：30dB； Max ：32dB |
| OTDR Function - Positioning accuracy | Max ：1m |
| OTDR Function-Attenuation Dead Zone | Max ：12m |
| OTDR Function - Event dead zone | Max ：2m |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
ADSS Fiber Optic Cable ADSS-32B1.3
Fiber Cables & Bundles
Lifo-fj
Product material: G652D Fiber core ，PE/AT Outer jacket Optical cable structure: Stranded Loose-Tube Type Optical cable outer diameter: 11.0±0.25
-
GJPFJV Indoor Ten-Gigabit Optical Cable Lifo-fj GJPFJV48A1a-OM3-300
Fiber Cables & Bundles
Lifo-fj
Inspection Standard: YD/T 1258.4-2005, Indoor optical cable series, part four: multicore optical cables Attenuation Coefficient [λ=850nm; Test Environment 22°C~25°C; Relative Humidity 47%~51%]: ≤3.5 dB/km Attenuation Coefficient [λ=1300nm; Test Environment 22°C~25°C; Relative Humidity 47%~51%]: ≤1.5 dB/km
-
GJPFJV Indoor Single-Mode Optical Cable
Fiber Cables & Bundles
Lifo-fj
Product material: G652D fiber core; environmentally friendly flame-retardant PVC and LSZH jackets Product specifications: GJPFJV 4/6/8/12 cores Tight-Buffered Diameter: 0.90mm
-
GJXH Indoor Drop Optical Cable
Fiber Cables & Bundles
Lifo-fj
Product material: G657A1 Fiber core ，PVC、LSZH Jacket Product specifications: 2 cores Optical cable dimensions: 2.0 mm × 3.0 mm
-
GJYXCH Outdoor Drop Optical Cable
Fiber Cables & Bundles
Lifo-fj
Product material: G657A1 Fiber core ，PVC、LSZH Jacket Product specifications: 2 cores Optical cable dimensions: 2.0 mm × 5.0 mm
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform