8E1+30P+6E Multiservice Optical Transceiver
The multiservice optical terminal is a compact 1U access platform integrating multiplexing, transmission and access for highly reliable solutions. On the transmission side, it supports fiber and E1 through 2 optical interfaces and 8 E1 interfaces, with 1+1 backup transmission. On the service side, it supports voice signals such as FXS, FXO and magneto, together with Ethernet and E1 interfaces. When the optical line is normal, the unit automatically selects fiber transmission and provides 6 physically isolated, line-rate Ethernet channels with total bandwidth of 600Mb/S, meeting demanding military, public-security and similar network-security and bandwidth requirements. When fiber is unavailable, E1 transmission provides 1 low-speed Ethernet channel with its rate configurable through CLI.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Optical Interface-Backup Transmission | Dual Optical Ports with 1+1 Backup Transmission |
| Optical Interface-Optical Line Coding | mBnB |
| Optical Interface-Receiver Sensitivity | better than -26dBm |
| Optical interface - Connector [optional] | LC optional |
| Optical interface - Transmission distance [optional] | 20km/40Km/60Km/80/120Km optional |
| Ethernet Interface - Interface Configuration | Provides 6 Physically Isolated 100M Line-Rate Ethernet Channels |
| Ethernet Interface-Total Ethernet Transmission Bandwidth | 600Mb/S |
| Ethernet Interface - Standard | Supports IEEE 802.3/802.3u |
| Ethernet Interface - Auto-Adaptive | Supports 10/100M Auto-Adaptive ， Full-Duplex ， Half-Duplex Autonegotiation |
| Ethernet Interface-Automatic Crossover/Straight-Through Cable Detection | Automatic crossover/straight-through cable adaptation |
| Ethernet Interface - Physical Interface | RJ45 |
| E1 Interface-Transparent Transmission Interface [During Optical Transmission] | During Optical Transmission, Provides 8 Transparent E1 Interfaces |
| E1 Interface-Aggregate Interface | Can Serve as a Group Interface, 2 E1 Channels with 1+1 Backup |
| E1 Interface-Interface Code Pattern | HDB3 Code |
| E1 Interface - Line Rate [±50ppm] | 2.048Mbp/s±50ppm |
| E1 Interface - Interface Impedance [Unbalanced/Balanced] | 75Ω / unbalanced, 120Ω / balanced |
| E1 Interface - Physical Interface | BNC |
| E1 Interface - Standard | ITU-T G.703、G.704 |
| E1 Interface - Jitter Characteristics | Meets G.704 and G.823 |
| FXS/FXO Interface - Interface Quantity | Supports 30 Channel FXS/FXO Interface |
| FXS/FXO Interface - Impedance | 200Ω+680Ω||0.1μF（FXO） |
| FXS/FXO Interface - Impedance | 200Ω+560Ω||0.1μF（FXS） |
| FXS/FXO Interface - Frequency Characteristics [-0.6～+3dB] | 300～ 3400Hz(-0.6～+3dB) |
| FXS/FXO Interface - Physical Interface | RJ45 |
| Magneto Telephone Interface - Interface Count | Supports ***up to 30 magneto interfaces. |
| Magneto Telephone Interface - Impedance | 600Ω |
| Magneto Telephone Interface-Frequency Characteristics [-0.6～+3dB] | 300～ 3400Hz(-0.6～+3dB) |
| Magneto Telephone Interface-Ringing Current [20~30Hz; 60~90V] | 25Hz（20~30Hz），75V(60~90V) |
| Magneto Telephone Interface - Physical Interface | RJ45 |
| Low-Speed Ethernet Interface - Standard | Supports IEEE 802.3/802.3u |
| Low-Speed Ethernet Interface - Auto-Adaptive | Supports 10/100M Auto-Adaptive ， Full-Duplex ， Half-Duplex Autonegotiation |
| Low-Speed Ethernet Interface-Automatic Crossover/Straight-Through Cable Detection | Automatic crossover/straight-through cable adaptation |
| Low-Speed Ethernet Interface-Bridging Performance | 256-Frame Buffer |
| Low-Speed Ethernet Interface -MAC Address | 1024MAC Addresses, Automatic Learning and Updating |
| Low-Speed Ethernet Interface-WAN Line Transmission Protocol | HDLC |
| Low-Speed Ethernet Interface-Access Rate | 64~1984 Kbps |
| Low-Speed Ethernet Interface - Physical Interface | RJ45 |
| Voice Coding and Signaling Method-Channel-Associated Signaling [Complies with ITU-T G.732] | 16-timeslot channel-associated signaling, compliant with ITU-T G.732 |
| Voice Coding and Signaling Method-PCM Coding [Complies with ITU-T G.711] | A-law PCM coding, 64Kb/S per voice channel, compliant with ITU-T G.711 |
| Console Interface - Rate | 9600b/S |
| Console Interface-Data Format | 8 Data Bits, 1 Stop Bit, No Parity |
| Console Interface - Physical Interface | RJ45 |
| Power supply [DC] | -48V DC(-36～-72V) |
| Power supply [AC] | 220V AC(165～265V) |
| Power Supply-Dual Power Supplies | Supports Dual Power Supplies |
| Power Supply - Total Power Consumption | Less than 25W |
| Mechanical Structure | 19 inches 1U |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
100G OEO
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 2*100G Bidirectional Transmission 4*100G Unidirectional Transmission Wavelength Range: CWDM：1271~1611nm、 Multimode ：850nm、1310nm DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: SDH、SAN、SONET、ETHERNET、OTN
The 100G OEO amplifier card from Huixinte Communications regenerates 100G optical signals through optical-electrical-optical conversion, providing reamplification, reshaping and retiming. It converts to standard DWDM wavelengths and works with DWDM multiplexers/demultiplexers. Applications include SDH, SAN, SONET, ETHERNET, OTN and data-center interconnects, addressing limited fiber resources and high transmission loss.
-
100G OTU
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 1*100G Bidirectional Transmission 1*100G Unidirectional Transmission Wavelength Range: DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: 100GE、OTU4
The 100G OTU card is a 100G fiber-link service access module developed by Huixinte Communications. It provides 3R regeneration (reamplification, reshaping and retiming) at any protocol rate from 103.125Gbit/s~111.81Gbit/s and converts signals to standard DWDM wavelengths. With DWDM multiplexers/demultiplexers, it enables WDM transmission for links with limited fibers and high loss.
-
10*10G + 100G 200G TMUX Board
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: a)10*10G Bidirectional Transmission +1*100G Bidirectional Transmission b)2*100G Bidirectional Transmission Wavelength （ Frequency ） Range: DWDM：1529.16nm-1567.14nm（191.3THz-196.05THz） Modulation Method [@100G / @200G；@100G；DP-16QAM@200G；DP-8QAM@200G；DP-QPSK@200G]: DP-QPSK@100G；DP-16QAM@200G；DP-8QAM@200G；DP-QPSK@200G
The 200G TMUX card converts either 10*10G SFP+ + 1*100G QSFP28 or 2*100G QSFP28 to 200G CFP2 DCO. The wavelength-tunable CFP2 DCO coherent module works with DWDM multiplexers/demultiplexers for wavelength-division multiplexed transmission, providing a high-quality solution for links with limited fiber resources and high fiber-line loss.
-
1U Integrated Transmission Platform Vispace 1000-1U
Optical Transport Equipment
Visint
Mechanical Parameters-Overall Dimensions: Width * Height * Depth =440*42*285mm Mechanical Parameters-Fully Configured Weight: ≤10KG Operating environment - Operating temperature: -10℃– 60℃
The Vispace 1000-1U integrated transmission platform is independently developed and manufactured to meet diverse market needs, greater integration and unified network management. Its standard 19-inch, 1U chassis fits most racks. Four slots accommodate 3 service boards and 1 network-element manager, normally in slot 4; that slot also accepts a service board when management is unnecessary. Mixed boards include OTU wavelength conversion, OEO regeneration, ETU optical/electrical conversion, OLP line protection, OBP bypass protection, OSS optical switching, ODM multiplexing/demultiplexing, OADM add/drop, EDFA amplification and DCM dispersion compensation. 2 rear power slots and all boards support hot swapping. Dual power slots support AC/DC, configured to customer needs.
-
2.5G OEO
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 4*2.488G bidirectional or 8*2.488G unidirectional transmission Wavelength Range: CWDM：1271~1611nm、 Multimode ：850nm、1310nm DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: PDH、SDH：STM-1/STM-4/STM-16 SONET:OC-3/OC-12/OC-48、FE、GE、1G、2G、CPRI 1~3、POS、FICON、ESCON
The 2.5G OEO amplifier board developed by Huixinte Communications amplifies and reshapes signals during optical transmission. It saves fiber resources and networking costs, addresses excessive transmission distance and is widely used for long-distance transmission on trunk networks.
Related Articles
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Loading...
Name
Phone
Organization
Use Case
Database Platform