16E1 Rack-Mount Ethernet Converter
The 16E1-10/100M Ethernet converter is independently developed remote transmission equipment using transparent/framed E1 channels conforming to ITU-T G.703. Its standalone design converts 4 10/100M Ethernet data interfaces into 1-16 E1 channels, extending interface distances through fiber, microwave and DDN private networks. It is suitable for connecting two distant Ethernet switches.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| E1 Interface [E1 Transmission Channel] | Complies with ITU-T G.703 G.704 and G.823 Standard |
| Interface [E1 Transmission Channel] | 75Ω BNC |
| Timing Method [E1 Transmission Channel] | Independent Bidirectional Timing, No Master/Slave Station Clock Setup Required |
| CRC Check Function [E1 Transmission Channel] | With CRC Checking |
| Panel LED Indicator [E1 Transmission Channel] | Displays Power and Line Operating Status |
| Power supply method [E1 Transmission Channel] | 220V AC/-48V DC |
| Cable Outer Layer [E1 Transmission Channel] | Cable Outer Layer Selectable as Floating, Grounded or Connected to Protective Earth |
| Interface [10/100M Ethernet Interface] | Complies with IEEE 802.3 Standard, Uses RJ-45 Interface |
| Operating mode [10/100M Ethernet Interface] | Full/Half Duplex |
| MAC Address [10/100M Ethernet Interface] | 1K Items |
| Automatic Address Refresh [10/100M Ethernet Interface] | Within 5 Minutes |
| Filtration Rate [10/100M Ethernet Interface ; *** Height] | Transmitted packets can be filtered at a ***maximum rate of 15Kpps. |
| Specifications [2M Port] | Complies with ITU-T G.703 Standard |
| Code Pattern [2M Port] | HDB3 |
| Bit rate [2M Port ; ±50ppm] | 2.048Mbps±50ppm |
| Type [2M Port; Unbalanced] | Unbalanced: 75Ω/BNC |
| Balanced Type [2M Port] | 120Ω/RJ-45 |
| Specifications [Ethernet Interface] | Fully Compatible with IEEE802.3 Standard |
| Transmission rate [Ethernet Interface] | 10/100Mbps |
| Operating method [Ethernet Interface] | Half Duplex/Full Duplex |
| Interface Type [Ethernet Interface] | RJ-45 Connector, CAT3/5 Unshielded Twisted Pair |
| Power supply Mode | 220V AC/-48V DC 50Hz |
| Power consumption | 15W |
| Temperature | 0℃～50℃ |
| Humidity [35℃; Non-condensing] | 90%(35℃) Non-condensing |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
100G OEO
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 2*100G Bidirectional Transmission 4*100G Unidirectional Transmission Wavelength Range: CWDM：1271~1611nm、 Multimode ：850nm、1310nm DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: SDH、SAN、SONET、ETHERNET、OTN
The 100G OEO amplifier card from Huixinte Communications regenerates 100G optical signals through optical-electrical-optical conversion, providing reamplification, reshaping and retiming. It converts to standard DWDM wavelengths and works with DWDM multiplexers/demultiplexers. Applications include SDH, SAN, SONET, ETHERNET, OTN and data-center interconnects, addressing limited fiber resources and high transmission loss.
-
100G OTU
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 1*100G Bidirectional Transmission 1*100G Unidirectional Transmission Wavelength Range: DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: 100GE、OTU4
The 100G OTU card is a 100G fiber-link service access module developed by Huixinte Communications. It provides 3R regeneration (reamplification, reshaping and retiming) at any protocol rate from 103.125Gbit/s~111.81Gbit/s and converts signals to standard DWDM wavelengths. With DWDM multiplexers/demultiplexers, it enables WDM transmission for links with limited fibers and high loss.
-
10*10G + 100G 200G TMUX Board
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: a)10*10G Bidirectional Transmission +1*100G Bidirectional Transmission b)2*100G Bidirectional Transmission Wavelength （ Frequency ） Range: DWDM：1529.16nm-1567.14nm（191.3THz-196.05THz） Modulation Method [@100G / @200G；@100G；DP-16QAM@200G；DP-8QAM@200G；DP-QPSK@200G]: DP-QPSK@100G；DP-16QAM@200G；DP-8QAM@200G；DP-QPSK@200G
The 200G TMUX card converts either 10*10G SFP+ + 1*100G QSFP28 or 2*100G QSFP28 to 200G CFP2 DCO. The wavelength-tunable CFP2 DCO coherent module works with DWDM multiplexers/demultiplexers for wavelength-division multiplexed transmission, providing a high-quality solution for links with limited fiber resources and high fiber-line loss.
-
1U Integrated Transmission Platform Vispace 1000-1U
Optical Transport Equipment
Visint
Mechanical Parameters-Overall Dimensions: Width * Height * Depth =440*42*285mm Mechanical Parameters-Fully Configured Weight: ≤10KG Operating environment - Operating temperature: -10℃– 60℃
The Vispace 1000-1U integrated transmission platform is independently developed and manufactured to meet diverse market needs, greater integration and unified network management. Its standard 19-inch, 1U chassis fits most racks. Four slots accommodate 3 service boards and 1 network-element manager, normally in slot 4; that slot also accepts a service board when management is unnecessary. Mixed boards include OTU wavelength conversion, OEO regeneration, ETU optical/electrical conversion, OLP line protection, OBP bypass protection, OSS optical switching, ODM multiplexing/demultiplexing, OADM add/drop, EDFA amplification and DCM dispersion compensation. 2 rear power slots and all boards support hot swapping. Dual power slots support AC/DC, configured to customer needs.
-
2.5G OEO
Optical Transport Equipment
Visint
Maximum Line-Card Capacity: 4*2.488G bidirectional or 8*2.488G unidirectional transmission Wavelength Range: CWDM：1271~1611nm、 Multimode ：850nm、1310nm DWDM：C-Band（100GHZ or 50GHZ） Service Access Type: PDH、SDH：STM-1/STM-4/STM-16 SONET:OC-3/OC-12/OC-48、FE、GE、1G、2G、CPRI 1~3、POS、FICON、ESCON
The 2.5G OEO amplifier board developed by Huixinte Communications amplifies and reshapes signals during optical transmission. It saves fiber resources and networking costs, addresses excessive transmission distance and is widely used for long-distance transmission on trunk networks.
Related Articles
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Loading...
Name
Phone
Organization
Use Case
Database Platform