PCR1015-B037-040-1030
Pockels cells are polarization modulators based on the Pockels effect. They are key components for intracavity Q-switching, pulse picking and regenerative amplification systems, and are also an effective means of modulating laser intensity, phase and frequency in laser processing and inspection equipment. The Moduoptik team has absorbed advanced international technology and developed innovative Pockels cells combining high repetition rates, low ringing, high damage thresholds and low loss. They are particularly suitable for high-frequency, high-energy laser systems. Stable, reliable structures, well-designed electrodes and effective thermal management substantially reduce external environmental effects, improve device reliability and reduce high-frequency signal transmission loss. Moduoptik has designed and developed DKDP, BBO, RTP and KTP series Pockels cells, with modulation frequencies from Hz to as high as 60 MHz and performance comparable to international equivalents. DKDP Pockels cells use the transverse or longitudinal electro-optic effect and cover wavelengths of 300-1300 nm. The required voltage for transverse Pockels cells can be kept below one hundred volts, while longitudinal Pockels cells have apertures up to 15 mm. BBO Pockels cells cover 250-1650 nm, with required voltages ranging from hundreds to thousands of volts. RTP Pockels cells cover 350-3500nm, with repetition rates reaching hundreds of kHz and apertures up to 10 mm. KTP Pockels cells use hydrothermally grown KTP to address the phenomenon of spot discoloration. We also offer Pockels cell accessories, including waveplates, polarizers and adjustment mounts, and can supply matching high-frequency, high-voltage drivers.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Optical material | BBO |
| Operating wavelength | 1030 nm |
| Effective Aperture | 4 mm |
| Transmittance | ≥99.2% |
| Dynamic Extinction ratio | ≥1000：1 |
| Vλ/4 | ≤3700 |
| Cooling method | Conduction cooling |
Datasheet
Supplier Information
Related Products
-
LGTi Crystal
Electro-Optics
Uvopto
Electro-Optic Coefficient: 1.8 pm/V Transmission Range: 300-7800 nm Half-wave voltage [Aspect Ratio 5:1]: 4800 V
Uvopto electro-optic crystal products.
-
LZGS Crystal
Electro-Optics
Uvopto
Electro-Optic Coefficient: 2.6 pm/V Transmission Range: 260-7600 nm Half-wave voltage [Aspect Ratio 5:1]: 3200 V
Uvopto electro-optic crystal products.
-
BBO Electro-Optic Crystal Basic characteristics
Electro-Optics
Iloptik
Basic Properties - Crystal Structure [Negative Uniaxial Crystal]: Trigonal Crystal System Basic Properties - Unit Cell Parameters [Room temperature]: a=b=12.532 Å，c=12.717 Å，Z=6 Basic Properties-Melting Point: 1095±5 ℃
BBO, β-barium borate crystal (β-Barium Borate Crystal), is an important nonlinear optical crystal widely used in laser technology and one of the most established nonlinear optical crystals for the ultraviolet band.
-
BBO Electro-Optic Crystal BBO Crystal Specifications
Electro-Optics
Iloptik
BBO Crystal Specifications - Dimensional Tolerance: （W±0.1mm)×(H±0.1mm)×(L+0.5/-0.1mm), Reception Custom BBO Crystal Specifications - Effective Clear Aperture: 95% Central Region BBO Crystal Specifications - Surface Quality: 10/5（MIL-PRF-13830B Standard ）
BBO, β-barium borate crystal (β-Barium Borate Crystal), is an important nonlinear optical crystal widely used in laser technology and one of the most established nonlinear optical crystals for the ultraviolet band.
-
CdTe Electro-Optic Crystal
Electro-Optics
Iloptik
Chemical formula: CdTe Crystal Structure: Cubic Crystal System Unit Cell Parameters a: a=6.48 Å
CdTe (cadmium telluride) is an important II-VI semiconductor with a direct bandgap, high absorption coefficient and good optoelectronic properties. Widely used in infrared optics and photovoltaics, it is suitable for high-efficiency solar cells, infrared detectors and X-ray detectors.
Related Articles
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
As a professional manufacturer of precision optical thin-film components, sycco-optics (Shandong Yanggu Hengjing Optoelectronics) launches high-performance 850nm narrow band pass filters for near-infrared precision detection, intelligent sensing and optical imaging systems. Adopting advanced vacuum coating technology, the filter realizes high transmittance in the target band and deep blocking in interference bands. It effectively eliminates stray light and spectral noise, serving as a core optical component for machine vision, biochemical detection and photoelectric sensing equipment.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Loading...
Name
Phone
Organization
Use Case
Database Platform