Two-Chamber Thermal Shock Test Chamber XB-OTS-150D
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Basket Dimensions | 50*60*50CM |
| Outer box dimensions [W*D*H] | 155*210*225CM |
| Basket Motion Direction | Vertical Direction |
| Basket Drive Method | Pneumatic Operation |
| Maximum Basket Load IC/Plastic | 30 KG |
| Temperature Fluctuation | ≤±0.5°C |
| Temperature Uniformity | ≤2°C |
| Temperature Deviation | ≤±2°C |
| Temperature Overshoot | ≤±3°C |
| High-Temperature Chamber-Preheating Temperature Range | +60°C～+200°C |
| High-Temperature Chamber-Heating Rate [+60°C→+200°C] | +60°C→+200°C≤35 minutes |
| Low-Temperature Chamber-Precooling Temperature Range | -78°C～0°C |
| Low-Temperature Chamber - Cooling Rate [+20°C→-70°C] | +20°C→-70°C≤80 minutes |
| Test Chamber-Temperature Deviation | ±2°C |
| Test Chamber-Temperature Recovery Time | 5 minutes within |
| Test Chamber-Basket Transfer Time | ≤10S |
| Controller - Monitor | Imported programmable touchscreen LCD with Chinese/English graphical display and an integrated microcomputer controller |
| Controller-Operating Mode | Program mode, fixed-value mode |
| Controller-Setting Method | Touchscreen input with Chinese and English menus. |
| Controller-Program Capacity | Editable programs: maximum 100; steps: maximum 1000; loops: maximum 20 (maximum 999 steps per loop); fixed programs: 10; programs can be linked (the sequence numbers of linked programs can be selected). |
| Controller - Setting Range - Temperature | Adjusted according to the equipment operating temperature range (upper limit +5°C, lower limit -5°C) |
| Controller - Setting and Display Resolution - Temperature | 0.1°C |
| Controller - Setting and Display Resolution - Time | 0.1min |
| Controller - Input | PT100 thermocouple |
| Controller - Communication Interface | RS-232/RS-485/GPIB/USB |
| Controller-Additional Functions | Fault alarms with cause and corrective-action prompts; power-failure protection; upper and lower temperature limit protection; calendar scheduling (automatic start and stop); self-diagnostics. |
| Material - Inner wall | SUS#304 stainless-steel sheet |
| Material - Enclosure | Imported Baosteel cold-rolled steel sheet with a powder-coated surface (XB standard color) |
| Cooling Compressor | German Bock compressors, Bitzer compressors and Copeland compressors |
| Evaporator | High-performance finned automatic load-capacity adjustment for long-term operation at low temperature, high temperature and high humidity without frosting (expanded-tube bubble condenser). |
| Refrigerant | Non-fluorinated environmentally friendly refrigerant R404A/R23; compliant with environmental regulations, safe and non-toxic |
| Condenser | Automatic high-efficiency finned heat dissipation with a cooling motor (air-cooled) |
| Condensation Method | Air cooling / Water cooling |
| Heater | High-quality nickel-chromium alloy wire electric heater with contactless control (SSR) |
| Power supply | AC 380V 50HZ, 3-phase +N+PE |
| Max Power | 38 KW |
| Max Weight | 1200 KG |
| Noise | Within 75 dB |
| Safety Protection Measures | Supply undervoltage, overvoltage, phase-loss and incorrect phase-sequence protection; triple overtemperature protection; heater short-circuit protection; refrigeration unit overpressure and overload protection; blower motor overload and overheat protection; control board overcurrent protection; earth-leakage protection. |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Constant-Temperature Water Bath Test Equipment
Other Measurement Instruments
Huayazhuhai
Voltage: 220V10A Gas pressure: 0.4~0.7MP Industrial computer: IPC+WIN10
For smartwatches, the equipment scans a QR code to identify each watch and connects by Bluetooth to transfer test data. One tray holds 16 products for simultaneous constant-temperature testing at 37 degrees +0.1 degree. A precision controller heats the water to simulate human body temperature. Fully immersed watches read 60 sets of temperature data according to thresholds. Data is transferred by phone Bluetooth, uploaded to Mes and compared with actual temperature. Calibration and testing are provided.
-
Smart-Wristband MMI Automated Test Equipment
Other Measurement Instruments
Huayazhuhai
LCD Color: Screen Dead Pixels, Bright Pixels, Dead Lines, Stripes, Stains, Dark Clumps, Light Transmission, Light Leakage and Shavings Charging Current Test: Current Acquisition, Threshold 270MA~330MA Motor Testing [±10HZ]: Amplitude 200HZ±10HZ
Designed specifically for smart wristbands, this equipment tests Bluetooth connectivity and communication, photography and QR-code scanning with information upload, LCD operation, brightness, current, motor operation, A+G and NFC.
-
Hermeticity Test Equipment
Other Measurement Instruments
Huayazhuhai
Differential Pressure-Resolution: 0.1Pa Differential Pressure-Display Range [(Guaranteed Accuracy Range ±1000Pa)]: ±999.9pa (accuracy guaranteed over ±1000Pa) Differential Pressure-Accuracy [±2.5%; but 2Pa below 50Pa]: ±2.5%3fdg:1Pa; 2Pa below 50Pa
This independently developed compact benchtop airtightness tester has been adopted through cooperation with multiple customers, receiving favorable feedback and repeat purchases. Its simplified construction and high test accuracy meet high-throughput production requirements.
-
Network Cable Tracer
Other Measurement Instruments
Lifo-fj
Power Supply: DC 9V Battery Electricity consumption: 15mA Signal Transmission Format: Multitone Audio Pulses
-
Whisper Excitation Module-Whisper Plus Series
Other Measurement Instruments
Pavilionintegration
Wavelength: 375 nm - 1064 nm Power: Up to 250mW RMS Noise (20Hz - 20MHz): < 0.1%
PIC's Whisper Plus series upgrades Whisper with diode-based CW solid-state technology, ultralow noise, better efficiency than DPSS/gas lasers and high cost effectiveness. Proprietary WhisperIT® eliminates mode hopping and minimizes optical noise. The range includes Whisper Plus, WMN Plus and WCP Plus. Internal beam shaping provides focused spots matched to flow cytometry. Improved optical power, stability and beam quality make it ideal for flow applications. Compact size simplifies installation, integration into existing instruments and one-step replacement/maintenance. Very long life and low consumption provide a highly reliable, economical flow-application solution.
Related Articles
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform