PCT High-Pressure Accelerated Aging Test Chamber XB-OTS-PCT350D
The PCT accelerated high-pressure aging tester, also called a high-temperature/high-pressure steam tester or pressure-cooker tester, evaluates the high-temperature resistance of products and materials under severe temperature, saturated humidity (100%R.H., saturated water vapor) and pressure.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Inner chamber Dimensions [Φ*D] | 300 mm × 340 mm |
| Outer box dimensions [W*H*D] | 650*1200*940 |
| Temperature Range [Saturated Vapor Temperature] | 100°C～+143°C(Saturated Vapor Temperature) |
| Pressure Range | 0.2～3kg/cm2(0.05～0.294MPa) |
| Pressurization Time | approximately 55min |
| Temperature Uniformity | ≤±0.5°C |
| Temperature Fluctuation | ≤±0.5°C |
| Humidity Range [Saturated Vapor Humidity] | 100%RH(Saturated Vapor Humidity) |
| Controller [optional] | Pushbuttons or touchscreen (optional) |
| Resolution - Temperature | 0.01°C |
| Resolution - Humidity | 0.1%RH |
| Resolution - Pressure | 0.1kg/cm² |
| Resolution - Voltage | 0.01DCV |
| Temperature Sensor | PT-100 ohnΩ |
| Enclosure material | Stainless steel plate with a high-grade baked coating, or 304 stainless steel |
| Inner chamber Material | 304 stainless steel |
| Insulation material | Glass Wool |
| BIAS Bias terminal [Optional Purchase] | Customized to user requirements |
| Safety system | Sensor Protection, Second-Stage High-Temperature Protection, First-Stage High-Pressure Protection, Voltage-Overload Protection, Voltage Monitoring, Manual Water Supply, Automatic Depressurization on Fault Shutdown, Drainage and Water Storage, Fault-Cause Display and Troubleshooting Reference, Fault Recording, Ground Leakage, Humidity-Heater High-Temperature Protection, Motor-Overload Protection, Fault Detection and Machine Safety Protection |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Constant-Temperature Water Bath Test Equipment
Other Measurement Instruments
Huayazhuhai
Voltage: 220V10A Gas pressure: 0.4~0.7MP Industrial computer: IPC+WIN10
For smartwatches, the equipment scans a QR code to identify each watch and connects by Bluetooth to transfer test data. One tray holds 16 products for simultaneous constant-temperature testing at 37 degrees +0.1 degree. A precision controller heats the water to simulate human body temperature. Fully immersed watches read 60 sets of temperature data according to thresholds. Data is transferred by phone Bluetooth, uploaded to Mes and compared with actual temperature. Calibration and testing are provided.
-
Smart-Wristband MMI Automated Test Equipment
Other Measurement Instruments
Huayazhuhai
LCD Color: Screen Dead Pixels, Bright Pixels, Dead Lines, Stripes, Stains, Dark Clumps, Light Transmission, Light Leakage and Shavings Charging Current Test: Current Acquisition, Threshold 270MA~330MA Motor Testing [±10HZ]: Amplitude 200HZ±10HZ
Designed specifically for smart wristbands, this equipment tests Bluetooth connectivity and communication, photography and QR-code scanning with information upload, LCD operation, brightness, current, motor operation, A+G and NFC.
-
Hermeticity Test Equipment
Other Measurement Instruments
Huayazhuhai
Differential Pressure-Resolution: 0.1Pa Differential Pressure-Display Range [(Guaranteed Accuracy Range ±1000Pa)]: ±999.9pa (accuracy guaranteed over ±1000Pa) Differential Pressure-Accuracy [±2.5%; but 2Pa below 50Pa]: ±2.5%3fdg:1Pa; 2Pa below 50Pa
This independently developed compact benchtop airtightness tester has been adopted through cooperation with multiple customers, receiving favorable feedback and repeat purchases. Its simplified construction and high test accuracy meet high-throughput production requirements.
-
Network Cable Tracer
Other Measurement Instruments
Lifo-fj
Power Supply: DC 9V Battery Electricity consumption: 15mA Signal Transmission Format: Multitone Audio Pulses
-
Whisper Excitation Module-Whisper Plus Series
Other Measurement Instruments
Pavilionintegration
Wavelength: 375 nm - 1064 nm Power: Up to 250mW RMS Noise (20Hz - 20MHz): < 0.1%
PIC's Whisper Plus series upgrades Whisper with diode-based CW solid-state technology, ultralow noise, better efficiency than DPSS/gas lasers and high cost effectiveness. Proprietary WhisperIT® eliminates mode hopping and minimizes optical noise. The range includes Whisper Plus, WMN Plus and WCP Plus. Internal beam shaping provides focused spots matched to flow cytometry. Improved optical power, stability and beam quality make it ideal for flow applications. Compact size simplifies installation, integration into existing instruments and one-step replacement/maintenance. Very long life and low consumption provide a highly reliable, economical flow-application solution.
Related Articles
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform