All-dielectric mirror
All-dielectric mirrors, habitually called: dielectric high-reflection mirrors, high-reflection mirrors, anti-laser mirrors. A mirror is one or more dielectric or metal films coated on an optical element or substrate to change the transmission direction of light waves, suitable for applications ranging from laser beam processing to instrument construction and advanced imaging. Stage laser lights, stage engineering laser high-reflection mirrors, high-power laser-resistant reflection systems, high-precision optical instruments, digital microscopes, laser motor galvanometers, projector optical engines, laser barcode scanners.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material | Optical glass, etc. |
| Surface Figure | 1/4 in or higher |
| Technical indicator photopurity | (scratch-dig)40-20 |
| Coating Material | TI3O5,SiO2 |
| Coating equipment | Imported ion coating or high-precision ion sputtering coating. |
| Resistant to high laser power | 20J/cm2 Pulse:6ns |
| Large Angle Reflection | 0 degrees, 30 degrees, 45 degrees, 57 degrees reflection greater than 99%, 97%, 95% |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Dichroic mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Dielectric high-reflection mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Dielectric high-reflection mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Metal mirror (Al Ag Au)
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Metal mirror (Al Ag Au)
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform