Metal mirror (Al Ag Au)
Metal reflective coatings are very fragile and require care when cleaning. Clean, dry pressurized gas can be used to blow off loose particles, then clean deionized water or a mild detergent. It is recommended to wipe gently with a cotton swab
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material | N-BK7, UV fused silica, etc. |
| Typical diameter (Фmm) | 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. |
| Dimensional Tolerance | ±0.1mm |
| Thickness Tolerance | ±0.2mm |
| Optical Aperture | >80% |
| Parallelism | 3'（Standard Type）、1'（High Accuracy Type） |
| Technical indicator photopurity | 60/40（Standard）、10/5（High Accuracy） |
| Surface form (per 25mm @633mm) | λ/4（Standard）、λ/8（High Accuracy） |
| Chamfer | <0.25mm x 45° |
| Coating | Polished and metal-coated on only one surface |
| Coating Type | Reflectivity |
| Protected aluminum | Average > 87% in the 400nm to 800nm range |
| VIS-enhanced aluminum | Average > 93% in the 450nm to 750nm range |
| UV-enhanced aluminum | Average > 86% in the 250nm to 400nm range |
| Protected silver | Average > 95% in the 400nm to 2000nm range |
| Protected gold | Average > 98% in the 650nm to 1600nm range |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Dichroic mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Dielectric high-reflection mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Dielectric high-reflection mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Metal mirror (Al Ag Au)
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform