Mirrors
Mirror is a reflecting surface that forms an image of an object when light rays coming from that object fall upon it. Usually mirrors are made of plate glass, one side of which is coated with metal or some special preparation to serve as a reflecting surface. The junction of this reflecting surface and the plate glass is called the mirror line. Highly polished metal and other materials serve also as mirrors, fused silica is used for applications that require high precision because of its very low thermal expansion. WITOPTICS offers dielectric coated mirrors and metal coated mirrors which are made of substrate such as Bk7, K9, Fused Silica, CaF2, Sapphire and so on
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material | N-BK7,H-K9L,Fused Silica, Sapphire etc |
| Diameter Tolerance | +0.0/-0.1 (General), +0.0/-0.05 (High Precision) |
| Thickness tolerance | ±0.1 (General), ±0.01 (High Precision) |
| Clear Aperture | >80% (Small Size), >90% (Large Size) |
| Parallelism | 3 min. (General), 3 sec. (High Precision) |
| Surface Quality | 60/40 (General), 10/5 (High Precision) |
| Bevel (face width x 450) | <0.25mm |
| Coating | Dielectric coated AR,HR,PR or mirrors and metal coated Al, Ag, Au |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Dichroic mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Dielectric high-reflection mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Dielectric high-reflection mirror
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Metal mirror (Al Ag Au)
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
-
Metal mirror (Al Ag Au)
Optical Mirrors
Mt-optics
Material: N-BK7, UV fused silica, etc. Typical diameter (Фmm): 10.0 12.7 15.0 20.0 25.4 30.0 50.8 etc. Dimensional Tolerance: ±0.1mm
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform