beamsplitter DJ05-1
Device, Substrate Material, Device, Application. (1×N). Flat Surface (M×N)
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Center Wavelength | 4.1μm |
| Diffusion angle | 3 |
| Material | Si |
| Dimensions | 10 × 10 |
| Thickness | 1 |
| Maximum distillation efficiency | 78.00% |
| Best Uneven | 7.50% |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Diffractive Optical Element DOE Laser
Diffractive Optics
Elite-lasers
Wavelength Range: 530-660nm Transverse Mode: Multimode Pattern Size @ 100 mm Distance (@ Design Wavelength): W:39mm H:39mm D:55mm Line Spacing:0.77mm
Diffractive Optical Elements (DOE) are emerging optical elements that have flourished in recent years. DOEs usually use micro-nano etching processes to form two-dimensionally distributed diffractive units; each diffractive unit can have a specific profile and refractive index, finely regulating the phase distribution of the laser wavefront. After passing through each diffractive unit, the laser diffracts and interferes at a certain distance (usually at infinity or the lens focal plane), forming a specific light intensity distribution. ELITE cooperates with many high-quality overseas DOE suppliers, and can also customize DOE lenses according to customer requirements, selecting high-quality DOE lenses. There are 16 different patterns available, including dot matrix, 3-line, 5-line, 7-line, 11-line, 81-line, etc.
-
Zone Plate
Diffractive Optics
Matsubayashi-op
Thickness Dimensions: 0.55, 0.7, 1.1mm( ) Dimensions Specification: 5~80mm Size differential: +0.1( )mm
-
ColorRouter
Diffractive Optics
Metalenx
Based on super-surface colour routing techniques, a revolutionary breakthrough has been brought to the traditional RGB imaging system.
-
MetaToF®/MetaStruclight®
Diffractive Optics
Metalenx
The launch end of the MetaToF-series product, which was introduced as a Metalens brand;
-
Metal and Nonmetal Optical Metastructures
Diffractive Optics
Hchiptech
Maximum Wafer Processing Size: 6 inches Equipment Accuracy: ±10 nm Minimum Feature Width: 50 nm
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform