GT303 Motorized Polarization Generator
Product Function Introduction GT303 is a polarization generator controlled electronically through program instructions. Its polarization control capability improves measurement speed, accuracy and overall productivity. The continuous fiber length gives it high power handling and ultra-low insertion loss. The design provides a wide range of automatic scanning rates and high-resolution angle increments. The four-fiber-loop structure design has been proven to provide excellent ultra-low power variation control (PDL). The GT303 motorized polarization generator is reliable in design and has a very wide range of use, from component testing to applications related to polarization mode dispersion PMD. Technical Specifications Model GT303 Working principle 4 Motorized Fiber Knob Loops Wavelength range 1200 ~ 1700 nm Insertion loss < 1.0 dB Polarization extinction ratio > 40dB Polarization dependent loss < 0.008dB Optical interface type FC/PC Communication interface RS232 Power supply voltage 100~ 240V AC 50- 60 Hz Operating temperature 0~ +40C Storage temperature -30~ +80C
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Principle | 4 motorized fiber loops, 4 Motorized Fiber Knob Loop |
| Wavelength Range | 1200 ~ 1700 nm |
| Insertion Loss | < 1.0 dB |
| Polarization Extinction Ratio | > 40dB |
| Polarization Dependent Loss | < 0.008dB |
| Power Supply Voltage | 100~ 240V AC 50- 60 Hz |
Applications
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Polarizing beamsplitter prism
Polarization Optics
Transoptics
Single-wavelength polarizing beamsplitter prism-AR coating (R) [per surface]: R<0.2 % per surface Single-wavelength polarizing beamsplitter prism-Tp-pol: Tp> 95 % Single-wavelength polarizing beamsplitter prism-Rs-pol: Rs> 99.8 %
A polarizing beamsplitter prism is formed by cementing a pair of high-precision right-angle prisms. A polarizing beamsplitting dielectric coating is deposited on the hypotenuse of one of the prisms, and an anti-reflection coating is deposited on the outer surface. It can split incident unpolarized light into two beams of perpendicular linearly polarized light, in which the P-polarized light passes through completely, and the S-polarized light is reflected at 45 degrees, with the exit direction forming a 90-degree angle with the P-polarized light.
-
Broadband Polarizing Beamsplitter Cube
Polarization Optics
Novelbeam
-
Non-polarizing Beamsplitter Cube
Polarization Optics
Novelbeam
-
Laser Polarizer
Polarization Optics
Novelbeam
-
Polarizing beamsplitter prism
Polarization Optics
Transoptics
Single-wavelength polarizing beamsplitter prism-AR coating (R) [per surface]: R<0.2 % per surface Single-wavelength polarizing beamsplitter prism-Tp-pol: Tp> 95 % Single-wavelength polarizing beamsplitter prism-Rs-pol: Rs> 99.8 %
A polarizing beamsplitter prism is formed by cementing a pair of high-precision right-angle prisms. A polarizing beamsplitting dielectric coating is deposited on the hypotenuse of one of the prisms, and an anti-reflection coating is deposited on the outer surface. It can split incident unpolarized light into two beams of perpendicular linearly polarized light, in which the P-polarized light passes through completely, and the S-polarized light is reflected at 45 degrees, with the exit direction forming a 90-degree angle with the P-polarized light.
Related Articles
Wuhan Optical Valley Interlink Technology Co., Ltd. was founded in 2013 by a technical team from Huazhong University of Science and Technology.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform