Collimator-Type Optical Attenuator
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| OperatingWavelength (λ) | 1525~1610nm |
| OutputPower (Po) | 10.0~17.0dBm |
| SpectralDensity (PSD) | -17~-10dBm/nm |
| Spectral Flatness (F) | ≤10dB |
| Spectral Stability (Ps) | ≤±0.005dB @15 min. |
| Short-term Output Power StabilityShort-term (Pss) | ≤±0.005dB @15 min. |
| Long-term Output Power Stability (PLs) | ≤±0.02dB @8h. |
| OperatingTemperature (TOP) | Bench-top ：0 ~ +60℃ |
| StorageTemperature (Ts) | -20 ~+70℃ |
| Relative Humidity (RH) | 20~80% |
| Maximum Power Consumption (Max. Pc) | ≤3W |
| Dimensions(L×W×H mm) | Bench-top ： 330×220×110W |
| Connector Type | FC/PC, FC/APC or customer customized |
| Alarm Signal | Low Level Alarm Low Level Alarm |
| Technical Specification - (Module: DC +3.3V,5A； Bench top: AC 220V±10%,50Hz,20W) | Module: DC +3.3V,5A； Bench top: AC 220V±10%,50Hz,20W% |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Non-Contact Attenuator
Fiber Optic Attenuators
Litascn
The non-contact decayer test cable is an advanced light test solution;
-
VS-VOACW1A-TO
Fiber Optic Attenuators
Mvstek
• Chip Dimensions: 1.71.70.47; mm Mirror Diameter: 0.82; mm Bond Pad Dimensions: 145145; um
Electro-driving photodegrader chip (ESVOA);
-
Single channel luminator
Fiber Optic Attenuators
Ovlink
The SVOA-1000 modular decayer uses high-quality devices with precise calibration protocols; is capable of continuous decomposition of light signals; and has a maximum decomposition of 60 dB. It can meet the requirements of modelling, equipment calibration, sensitivity testing, power metering, etc., for the loss of the manufacturer of modules/units; the internalization of independent batteries; and mobility. Low-input loss and high-resolution real-time monitoring of input output power high-resolution displays liquid crystal screens; operational convenience relative decomposition and absolute decomposition at the same time displays standard RS-232 interfaces; secondary control software; photoware production and research; teaching and testing of light communications
-
Multi-channel single-mode light decayer
Fiber Optic Attenuators
Ovlink
Fibre type: Monomodular fibre Channel number: 1, 2, 4, 8 Wavelength range: 1270~1610; nm
DVOA-1000 Multi-channel Mono-Modular Modular Distresser uses high-quality devices with precise calibration protocols; allows continuous decay of light signals; maximum decay can be up to 60 dB. The need for modelling, equipment calibration, sensitivity testing, power metering, etc. for module / device manufacturer losses can be met. Superhigh step resolution Low insertion loss and high resolution Real time monitoring of input output power High resolution displaying liquid crystal screens; operation convenience Decline and repeatability standard RS-232 interface; secondary control software
-
Multi-channel multi-modular light decayer
Fiber Optic Attenuators
Ovlink
Number of channels: 4.8 Fibres, interface type: Multi-module fibre, FC/APC, FC/PC Calibration wavelength: 850nm
The DVOA-300X series multi-channel multi-mode modular decayers employ high-quality devices with precise calibration protocols; are capable of continuous decomposition of light signals; have a maximum decomposition of up to 40 dB; it can meet simulations of equipment and system wear and tear by the manufacturer of systems and devices; equipment calibration; the need for power metering linear measurements; and have very low penetration depletion and high repetition of decay. Up to 8 channels with maximum decay of up to 40dB devices to support open and constant power patterns to support the output of light power monitoring for each channel with an independent lightlock function
Related Articles
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Fluoride crystal glass and K9 optical glass are two core optical substrates widely used in precision optical systems, laser equipment and photoelectric scientific research.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform