100G CFP2 to QSFP28 Adapter
The 100G CFP2 to QSFP28 Adapter module is a four-channel, high-performance, hot-pluggable, and interconnect solution supporting 100G Ethernet and Telecom. The adapter converts a CFP MSA interface to 1-port of 100G QSFP28. It integrates four data lanes in each direction with operating at up to 28Gbps per lane.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Supply Voltage | 3.13-3.47V |
| Input Voltage | -0.3-Vcc+0.3V |
| Storage Temperature | -20-85°C |
| Humidity(non-condensing) | 5-85% |
| Operating Case Temperature | 0-70°C |
| Data Rate Per Lane | 25.78125-27.952Gbps |
| Power Dissipation | 2W |
| Low Power Mode Dissipation | 2W |
| Differential Input Impedance | 90-110Ω |
| Differential Output Impedance | 90-110Ω |
| Differential Input Voltage Amplitude | 300-900mVp-p |
| Differential Output Voltage Amplitude | 400-800mVp-p |
| Bit Error Rate | E-12 |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
Type TVG002 Push-in Connectors
Posts and Post Holders
Burkert
Material: Nickel-plated brass, Stainless steel, POM, PBT Operating Medium: Air Operating Medium: neutral gases
The Type TVG002 Push-in Connectors are versatile and reliable components designed for use in fluid control systems. They are available in various materials, including nickel-plated brass, stainless steel, POM, and PBT, making them suitable for a wide range of applications involving air, neutral gases, and water.
-
Type TVU001/TVG003 Fitting Connectors
Posts and Post Holders
Burkert
Maximum Nominal Pressure (Nickel-plated brass): 60bar Maximum Nominal Pressure (Stainless steel): 40bar Maximum Nominal Pressure (Plastic): 10bar
The Type TVU001/TVG003 fitting connectors are versatile components designed for fluid control systems, available in various materials such as nickel-plated brass, stainless steel, plastic, and aluminum. They are suitable for a wide range of applications requiring reliable and durable connections.
-
PDM-5203 Resistance Vacuum Gauge
Posts and Post Holders
ZhVacuum
Power Supply Voltage: 5VDC Ripple: ≤5%Vpp Current: <200mA
The PDM-5203 Resistance Vacuum Gauge is a precision instrument designed for measuring vacuum pressure with high accuracy and reliability.
-
Flange-Mounted Optical Slit Holder
Posts and Post Holders
Yokogawa
Body Material: Black engineering plastic Surface Finish: Matte textured Mounting Type: Circular flange mount
The Flange-Mounted Optical Slit Holder is a compact optomechanical mounting component designed to position a slit, blade, or aperture element precisely within an optical beam path. As shown in the product image, the holder consists of a circular flange base with three brass-colored Phillips screws for secure fixation, combined with a cantilever-style rectangular arm. The arm features a rectangular through-window in its mid-section that allows the beam to pass, while a slotted metal plate embedded at the tip of the arm serves as the functional element for beam definition, edge reference, or light blocking. The main body is made of black matte-textured engineering plastic, offering a lightweight, non-reflective, and cost-effective solution for laboratory optical setups such as spectrometer slit mounting, knife-edge beam analysis, and general beam control on optical benches.
-
ST Connector Fiber Optic Inspection Microscope Tip (ST CR Adapter Tip)
Posts and Post Holders
Yokogawa
Compatible Connector Type: ST Compatible Ferrule Diameter: 2.5mm Product Marking: ST CR / MNS
This product is a fiber optic connector end-face inspection tip designed for ST connectors, used together with handheld or benchtop fiber optic inspection microscopes/probes. The tip features a black cylindrical housing with a square stainless steel mounting flange fixed by two Phillips screws, and a knurled front section for easy installation and removal from the microscope probe body. The metal flange is engraved with the marking 'ST CR / MNS', indicating its compatibility with ST-type connectors. Once attached to the inspection probe, the tip guides the ST connector ferrule (typically 2.5mm) into the correct focal position, enabling fast, accurate and repeatable visual inspection of the fiber end-face for scratches, cracks, contamination and polishing defects, helping ensure the quality and reliability of fiber optic links.
Related Articles
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
Looking for a market-verified 808nm pump laser diode? This guide introduces HAUCORE DM-8E5A-8OD (HGLD-808-COS-D-5W), its core advantages, key specs and mainstream industrial, medical & research applications.
Founded in 2003, BWT Beijing Optoelectronics adheres to the mission "Let Dreams Fly With Light" and vision of becoming a Global Leader in Laser Solutions, guided by the core value "Innovate to Achieve Extraordinary".
Loading...
Name
Phone
Organization
Use Case
Database Platform