100G QSFP28 SR4 100m 850nm MPO Optical Transceiver RQ-100G-SR4
100G QSFP28 SR4 100m 850nm MPO Optical Transceiver，support 100Gb/s and up to 100m transmission on MM fiber, it works in high-speed IDC connection solutions and so on. FIBERWDM’s 100G QSFP28 SR4 is a 4×25Gbps multi mode fiber, hot pluggable optical transceiver. The module integrates four parallel lanes with data rate at 25.78Gbps each lane. It can transmit up to 70 m on fiber OM3 fiber or 100 m on OM4 fiber with FEC.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Storage Temperature Range TSTG | min:-40 ⁰C; max:+85 ⁰C |
| Supply Voltage VCC | min:0 V; max:4 V |
| Relative Humidity RH | 5%to 85% non-condensing |
| Operating Conditions-Case Temperature-Operating TCASE | min:0 ⁰C; max:70 ⁰C |
| Operating Conditions-Supply Voltage Vcc | min:3.14 V; max:3.46 V |
| Operating Conditions-Power Consumption PDI SS | max:2.5 W |
| Operating Conditions-Link Distance over OM4 Fiber | max:100 M |
| Operating Conditions-Link Distance over OM3 Fiber | max:70 M |
| Transmitter Optical Specifications-Signaling Rate,each lane | 25.78125 ± 100ppm |
| Transmitter Optical Specifications-Center Wavelength Range | min:840 nm; typical:850 nm; max:860 nm |
| Transmitter Optical Specifications-Modulation Format | NRZ |
| Transmitter Optical Specifications-Average launch Power per lane | min:-8.4 dBm; max:2.4 dBm |
| Transmitter Optical Specifications-RMS spectral width | max:0.6 nm |
| Transmitter Optical Specifications-Optical Modulation Amplitude ,each lane | min:-6.4 dBm; max:3.0 dBm |
| Transmitter Optical Specifications-Average Launch Power per Lane @TX Off State | max:-30.0 dBm |
| Transmitter Optical Specifications-Launch Power in OMA minus TDEC,each Lane | min:-7.3 dBm |
| Transmitter Optical Specifications-Transmitter and Dispersion Eye Closure,each Lane | max:4.3 dB |
| Transmitter Optical Specifications-Extinction Ratio | min:2.0 dB |
| Transmitter Optical Specifications-Optical Return Loss Tolerance | max:12 dB |
| Transmitter Optical Specifications-Transmitter Eye mask definition {X1, X2,X3,Y1,Y2,Y3} | {0.3,0.38,0.45,0.35,0.41,0.5} |
| Receiver Optical Specifications-Signaling Rate,each lane | 25.78125 ± 100ppm |
| Receiver Optical Specifications-Lane Wavelength Range | min:840 nm; typical:850 nm; max:860 nm |
| Receiver Optical Specifications-Modulation Format | NRZ |
| Receiver Optical Specifications-Damage Threshold | min:3.4 dBm |
| Receiver Optical Specifications-Average Receive Power,each lane | min:- 10.3; max:2.4 dBm |
| Receiver Optical Specifications-Receiver Power,each lane (OMA) | max:3.0 dBm |
| Receiver Optical Specifications-Receiver Reflectance | max:- 12.0 |
| Receiver Optical Specifications-Stressed Receiver Sensitivity (OMA),each lane | max:-5.2 dBm |
| Receiver Optical Specifications-Stressed Eye Closure [Stressed Conditions for Stress Receiver Sensitivity] | typical:4.3 dB |
| Receiver Optical Specifications-stressed Eye J2Jitter [Stressed Conditions for Stress Receiver Sensitivity] | typical:0.39 UI |
| Receiver Optical Specifications-stressed Eye J4Jitter [Stressed Conditions for Stress Receiver Sensitivity] | typical:0.53 UI |
| Receiver Optical Specifications-OMA of each aggressor lane [Stressed Conditions for Stress Receiver Sensitivity] | typical:3 dBm |
| Receiver Optical Specifications-Stressed Receiver Eye Mask Definition {X1,X2,X3,Y1,Y2,Y3} [Stressed Conditions for Stress Receiver Sensitivity] | {0.28,0.5,0.5,0.33,0.33,0.4} |
| Receiver Optical Specifications-RX_LOS_Assert Min/Max [Stressed Conditions for Stress Receiver Sensitivity] | min:-30.0 dBm |
| Receiver Optical Specifications-RX_LOS_De-Assert Min/Max [Stressed Conditions for Stress Receiver Sensitivity] | max:- 12.0 |
| Receiver Optical Specifications-RX_LOS_Hysteresis [Stressed Conditions for Stress Receiver Sensitivity] | min:0.5 dB |
| High Speed Electrical Specifications-Signaling rate per lane (range) [Transmitter Parameter] | 25.78125 ± 100ppm |
| High Speed Electrical Specifications-AC common-mode output voltage (RMS) [Transmitter Parameter; RMS] | max:17.5 mV |
| High Speed Electrical Specifications-Differential output voltage [Transmitter Parameter] | max:900 mV |
| High Speed Electrical Specifications-Eye width [Transmitter Parameter] | min:0.57 UI |
| High Speed Electrical Specifications-Eye height,differential [Transmitter Parameter] | min:228 mV |
| High Speed Electrical Specifications-Vertical eye closure [Transmitter Parameter] | max:5.5 dB |
| High Speed Electrical Specifications-Differential output return loss [Transmitter Parameter] | Equation (83E– 2) |
| High Speed Electrical Specifications-Common to differential mode conversion return loss [Transmitter Parameter] | Equation (83E– 3) |
| High Speed Electrical Specifications-Differential termination mismatch [Transmitter Parameter] | max:10 % |
| High Speed Electrical Specifications-Transition time (20%to 80%) [Transmitter Parameter] | min:12 ps |
| High Speed Electrical Specifications-DC common mode voltage [Transmitter Parameter] | min:-350 mV; max:2850 mV |
| High Speed Electrical Specifications-Signaling rate per lane (range) [Receiver Parameter] | 25.78125 ± 100ppm |
| High Speed Electrical Specifications-AC common-mode output voltage (RMS) [Receiver Parameter; RMS] | max:17.5 mV |
| High Speed Electrical Specifications-Differential output voltage [Receiver Parameter] | max:900 mV |
| High Speed Electrical Specifications-Eye width [Receiver Parameter] | min:0.57 UI |
| High Speed Electrical Specifications-Eye height,differential [Receiver Parameter] | min:228 mV |
| High Speed Electrical Specifications-Vertical eye closure [Receiver Parameter] | max:5.5 dB |
| High Speed Electrical Specifications-Differential output return loss [Receiver Parameter] | Equation (83E– 2) |
| High Speed Electrical Specifications-Common to differential mode conversion return loss [Receiver Parameter] | Equation (83E– 3) |
| High Speed Electrical Specifications-Differential termination mismatch [Receiver Parameter] | max:10 % |
| High Speed Electrical Specifications-Transition time ( 20%to 80%) [Receiver Parameter] | min:12 ps |
| Data Rate [Order information; RQ-100G-SR4] | 100 Gb/s |
| Wavelength [Order information; RQ-100G-SR4] | 850nm |
| Reach [Order information; RQ-100G-SR4] | 0.1 km |
| LD [Order information; RQ-100G-SR4] | VCSEL |
| Tx Power [Order information; RQ-100G-SR4] | -8.4~2.4 dBm |
| PD [Order information; RQ-100G-SR4] | PIN |
| Rx Sens [Order information; RQ-100G-SR4] | <-10.3 dBm |
| Temperature [Order information; RQ-100G-SR4] | 0~70 ℃ |
Key Features
Datasheet
Supplier Information
Related Products
-
10G 1310nm 10KM Dual-Fiber Industrial-Grade 10PIN Surface-Mount Fully Domestically Sourced Miniature Optical Module
Transmitters and Receivers
Fiberwdm
Module Specifications - Storage Temperature TSTG: min:-55 ℃; max:+85 ℃ Module Specifications - Soldering Temperature TSOLD: max:+260 ℃ Module Specifications - Welding Time tSOLD: max:5 s
RS-10G10-31-10DI is an ultrashort dual-fiber bidirectional optical transceiver with transmitter/receiver in a small metal enclosure for greater EMI resistance. A high-power LD transmitter uses CML TD+/TD- signals. The receiver includes a PIN, transimpedance preamplifier and limiting amplifier, with CML RD+/RD- outputs and standard LVTTL signal-detect SD. Transmit-enable TDIS allows power-saving mode. Pins/mounting dimensions are fully compatible with comparable STRATOS products; function pins, mounting and outline dimensions are customizable. Rigorous military-grade screening and environmental tests ensure reliability/adaptability, including vibration/EMI resistance, damp-heat resistance and broad temperature tolerance for airborne, shipboard and high-altitude environments. Compact, lightweight all-metal construction is only 12mm high for confined boards/chassis.
-
50G QSFP+ ER4 40Km 1310nm LC Optical Transceiver RQ-50G-LR4
Transmitters and Receivers
Fiberwdm
Data Rate [Order information]: 50 Gb/s Wavelength [Order information]: 1310nm Reach [Order information]: 40 km
50G QSFP ER4 optical transceiver module, support 50Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, 5G network mid-haul solution, and so on.
-
50G QSFP+ ER4 40Km 1310nm LC Optical Transceiver RQ-50G-LR4-I
Transmitters and Receivers
Fiberwdm
Data Rate [Order information]: 50 Gb/s Wavelength [Order information]: 1310nm Reach [Order information]: 40 km
50G QSFP ER4 optical transceiver module, support 50Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, 5G network mid-haul solution, and so on.
-
SNAP12-Series Parallel Optical Transceiver Module RSN12R-3GM-85-I
Transmitters and Receivers
Fiberwdm
Number of Channels: 12 Receive Channels Package Form: SNAP12 Operating Wavelength: 850nm
SNAP12-series parallel optical transceiver modules mainly support very-short-distance high-speed data communication and parallel interconnects in optical backplanes, server/storage-array connections and radar processors. They offer low electromagnetic radiation and strong interference resistance. Dimensions comply with SNAP12 MSA. Interfaces are a pluggable 10×10Pin electrical connector and a standard pluggable MPO optical connector. The ambient operating range is -40 to 85℃, with per-channel rates of 1.25–10.3125Gbps.
Related Articles
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
Recently, the key laboratory of Functional Crystal Materials of Tianjin University has published a cutting-edge research paper titled Enhanced Second-Harmonic Generation in Quadratically Nonlinear Weyl Semimetal NbAs for Broadband Photodetection Applications on Advanced Science, a top-tier international academic journal.
Driven by fast‑growing demands of 3D perception, biometric authentication and machine‑vision industries, near‑infrared imaging optics have become a vital hardware component for intelligent sensing systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform