AUTO111 Fully Automatic Inline Low-Current Inspection Equipment
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Power Supply - Number of Test Channels | 48 Channels |
| Power Supply - Total Output Capability | 300V/2A |
| Power Supply - Current Output Range per Channel | 10uA -1000mA |
| Power Supply - Low-Current Output Accuracy per Channel [1mA/10mA/1000mA] | 0.3% of Range ±5 Reading Counts (1mA/10mA/1000mA) |
| Power Supply - Voltage Output Range per Channel | 0-300V |
| Power Supply - Voltage Measurement Accuracy per Channel [50V/300V] | 0.1% of Range ±5 Reading Counts (50V/300V) |
| Power Supply - Differential Voltage Test | Detection Threshold Configurable from 0.1~10V Differential Voltage per Channel |
| Power Supply - EOS Current Test | Instantaneous Test Current Waveform Error within 10% of Set Value |
| AOI - Maximum PCB Inspection Area | L：850*400mm |
| AOI - Minimum Spacing between Detected Lamp Beads | 2mm |
| AOI - Detection Rate [One LED Not Lit] | 100% Detection of Individual Unlit LEDs |
| Machine - Line Height [Adjustable Support Feet] | 900±50mm (Adjustable Support Feet) |
| Machine - Line Width [Motorized Adjustment] | 270mm-450mm (Motorized Adjustment) |
| Machine - Production Capacity Efficiency | 12 Panels per Large Board,Cycle<30s;UPH1440 Including Transport/Test/Code Scan to MES;Setup/Changeover Program<10 Minutes |
| Machine - Maximum Load | Can Smoothly Transport Products Weighing 5kg |
| Machine - Transport Direction | Left-Right, Right-Left, Left-Left, Right-Right Can Be Freely and Quickly Set |
| Machine - Docking Table | Input/Output Connection Available (2 Input Points, 2 Output Points) |
| Machine - PCB Thickness Range | 0.6mm~6mm |
| Machine - Probe Mode | One Adjustable Pin Block Each Side;Tests Strips with Both Polarities on Each Side or Opposite Polarities on Opposite Sides;Adjustable Probe Height |
| Machine - Test Module Probe | Suitable for Various Product Models, Adjustable Test Probe Positions and Spacing |
| Interface - Dimensions | 2000x1350x1600 (Length×Width×Height) |
| Interface - Weight | 2000KG |
| Interface - Power | 2KW |
| Interface - Air Supply | 0.4-0.6 MPa |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Thermal Imager Comprehensive Performance Test System HUT-1500
Optical Inspection
Lvyq
Area-Source Blackbody - Blackbody Model: HPBS-100 Optical Collimator - Applicable Wavelength Band: 0.4~14μm Optical Collimator - Focal Length: 1500mm
The thermal-imager comprehensive performance test system is a series of high-performance systems for evaluating complete thermal imagers during assembly, adjustment and performance testing. It measures imaging-performance parameters such as MRTD, NETD and MTF, as well as technical requirements for practical engineering use, including FOV, optical-axis alignment and optical-axis stability. It also supports real-time thermal-image adjustment.
-
MicroLED Measurement System
Optical Inspection
Lic-vision
-
LCD & OLED Measurement System
Optical Inspection
Lic-vision
-
Internal Stress Inspection Instrument strainviewer(sv20)
Optical Inspection
Tera-aurora
Sample Measurement Aperture [Parameter Image Heading SV20]: 1~10 mm Measurement Mode [Parameter Image Heading SV20]: Single Wavelength / Multiple Wavelengths Stress Measurement Output Content [Parameter Image Heading SV20]: Phase Retardation (°) and Optical Retardation (nm); Combined Stress (MPa) and Azimuth
Quantitatively Measures Internal-Stress Distribution in Transparent Optical Components
Related Articles
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
Recently, the key laboratory of Functional Crystal Materials of Tianjin University has published a cutting-edge research paper titled Enhanced Second-Harmonic Generation in Quadratically Nonlinear Weyl Semimetal NbAs for Broadband Photodetection Applications on Advanced Science, a top-tier international academic journal.
Driven by fast‑growing demands of 3D perception, biometric authentication and machine‑vision industries, near‑infrared imaging optics have become a vital hardware component for intelligent sensing systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform