PPC Single-Board Computer Board E-PPC
E-PPC High-Performance Standard6U VME Controller,One NXP QorIQ P2020 up to1.2GHz,Hardware Requirements Compatible with MVME2500.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Processor | One Freescale QorIQ P2020,1.2GHz,512KB L2,3 PCIE Controllers,Dual-Core Concurrent/SMP |
| Main Memory | DDR3 SDRAM, 64bit 100MHz, 2GB, w/ECC |
| Flash Storage | 2 x32MB SPI Flash, 32bit, with boot Backup |
| NVRAM | 512KB NVRAM |
| PMC Interface | 2 PMC Interfaces,64bit/133MHz PCI-X;PMC/XMC/SATA via MUX,Only One Interface at a Time |
| XMC Interface | 2 XMC Interfaces; PMC/XMC/SATA Selected by MUX, Only One Interface Usable at a Time |
| Network Port | 2 Front RJ45 10M/100M/1000M;1 Rear VME P2 10M/100M/1000M |
| VME Interface | VME Bus, 32bit Address, 32bit Data |
| RTC / Timing | Module with RTC Function |
| EEPROM | 64KB uesr EEPROM，8KB VPD EEPROM |
| SATA Interface | One SATA Interface, PMC/XMC/SATA Selected through MUX |
| USB Interface | One USB Interface Accessible on Front Panel |
| Dimensions | 6U 4HP Standard VME Plug-In, Air-Cooled |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
RD-100S
Controllers & Metrology
Raiven
Channel [Channel Switching]: ×4 Channels (Channel Switching) Drive Output Voltage: 100V(MAX)
Open-Loop Piezo-Screw Controller,Channel Switching Controls Four Screws,Custom Channel Count,24VDC/1.5A,Fan Cooling Quickly Removes Heat.
-
MC Motion Control Board E-MC
Controllers & Metrology
Raiven
E-MC is a high-performance industrial main control board based on the standard 6U VME architecture. It uses high-performance multicore DSP and ZYNQ main processors and communicates with laser-interferometer axis cards through the P2bus bus. Suitable for large-scale real-time signal processing and multicore parallel processing, it has been used in nanometer-level motion control for step-and-scan lithography. Applications include projection step-and-scan lithography, electron-beam lithography, electron-beam inspection and nanoimprinting.
-
SEC600 Motion Controller
Controllers & Metrology
Raiven
Grating Sensor Data Interface: 4 ABZ Channels, RS422, Rate Supports 30MHz; Optional Endat/BissC Data Storage: Supports 5K Data Sampling and 10s Storage, Simultaneously Stores 20 Single-Precision Floating-Point Variables Gigabit Ethernet: 1 Channel, RJ45 Interface, Modbus-TCP Supported
The SEC600 motion controller is a high-performance signal-processing board using an ARM+FPGA ZYNQ main controller. It offers displacement-sensor acquisition, analog acquisition/output, digital I/O and high-speed communication. Optional hardware-in-the-loop simulation combines with MATLAB/Simulink for rapid control prototyping (RCP). It has been used for semiconductor-equipment motion control and maglev/voice-coil active vibration isolation. The host Demo communicates with the board over Ethernet.
-
GMC Control Card
Controllers & Metrology
Scanneroptics
Drawing on years of technical experience, 思特光学 developed the GMC controller with high accuracy/resolution, powerful functions and easy integration. Galvanometer/laser synchronization and linked control of galvanometers with an external precision motion stage (four-axis coordinated motion) help tackle challenging tasks. High-accuracy correction ensures positioning in large-format processing. C#/C++ secondary-development libraries support various 32/64-bit Windows systems for flexible host-software development. User-friendly ScanWorld laser-processing software is easy to learn/use, parses STEP, IGES and STL 3D formats, supports creating/editing/slicing 3D graphics, and offers 3D surface marking and relief engraving.
Related Articles
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Loading...
Name
Phone
Organization
Use Case
Database Platform