Halogen Light Source HAS0425
Light sources are core components for multispectral and hyperspectral remote sensing in indoor settings such as laboratories and industrial inspection. Three types are available: mercury, LED, and tungsten-halogen. The mercury source combines a low-pressure mercury lamp with an integrating sphere to produce uniform area illumination containing characteristic lines, for spectral calibration and stability monitoring of VNIR hyperspectral cameras. The full-spectrum LED source covers 400-1000 nm and uses cylindrical-lens focusing and homogenization to form strip-shaped area illumination for pushbroom imaging. Low heat suits prolonged operation and temperature-sensitive targets. The tungsten-halogen source covers 400-2500 nm and uses a lamp reflector for focusing and homogenization into a strip-shaped area source, supporting pushbroom imaging with VNIR, NIR, and SWIR hyperspectral cameras.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Input Voltage [Parameters of a Single Light Source] | 24V |
| Power Dissipation [Parameters of a Single Light Source] | 300W |
| Wavelength Range [Parameters of a Single Light Source] | 400-2500nm |
| Light-Emitting Area [Parameters of a Single Light Source] | 315mm×52mm |
| Typical Irradiance [Parameters of a Single Light Source; λ700nm; H300mm] | 0.80W/m²/nm@λ700nm |
| Typical Irradiance [Parameters of a Single Light Source; λ1300nm; H300mm] | 1.01W/m²/nm@λ1300nm |
| Typical Irradiance [Parameters of a Single Light Source; λ2100nm; H300mm] | 0.38W/m²/nm@λ2100nm(H300mm) |
| Recommended Working Distance [Parameters of a Single Light Source] | ≥300mm |
| Dimensions (Length × Width × Height) [Parameters of a Single Light Source; Length × Width × Height] | 327mm×60mm×136mm |
| Weight [Parameters of a Single Light Source] | ~2.5kg |
| Light Source Cable Length [Parameters of a Single Light Source; Standard 1.5m, Customizable Length] | Standard 1.5m, Length Customizable |
| Light Source Controller Input Voltage [1 Light Source Controller Can Simultaneously Control 2 Light Sources] | 220V |
| Light Source Controller Maximum Output Power [1 Light Source Controller Can Simultaneously Control 2 Light Sources] | 750W |
| Brightness Control | Supports Continuous Brightness Adjustment |
| Light Source Controller Power Cord Length [Standard 1.5m, Length Customizable; 1 Light Source Controller Can Control 2 Light Sources Simultaneously] | Standard 1.5m, Length Customizable |
| Operating Ambient Temperature | -10~+45℃ |
| Storage ambient temperature | -20~+55℃ |
| Storage Ambient Humidity [Noncondensing] | 20%~80%RH (Noncondensing) |
| Compliant with standards | CE, RoHS |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
BIM-5003 flashing xenon lamp power supply Lamps Brolight
Operating Voltage [DC]: DC 12V/24V optional Trigger Voltage [DC]: DC 5V/0V (high/low level) Output Waveform: Square Wave
The BIM-5003 is a palm-sized portable supply developed for modular xenon flash lamps. As a driver for the SIM-6205 series pulsed xenon lamp, it supplies stable 12V/24V operating power and 5V trigger pulses at 10Hz–95Hz. The BIM-5003 primarily serves the SIM-6205 series and also supports Hamamatsu modules including L9455, L11316, L11317, L12745, L13651, and L13821.
-
BIM-6203 deuterium-tungsten lamp light source Lamps Brolight
Wavelength Range: 230-2500 nm Bulb power - Deuterium lamp: 25W Bulb power - Tungsten lamp: 20W
The BIM-6203 deuterium-tungsten source combines highly stable deuterium and tungsten lamps. Innovative filtering suppresses characteristic deuterium peaks for highly stable, smooth, continuous output over 230-2500nm. It is well suited to high-precision quantitative absorbance, concentration, and transmittance measurements. The BIM-6203's two sources switch independently through housing buttons or individual remote TTL control.
-
Light-source device teaching experiment system SPT-EDU Lamps Cotest
Ketai distilled standard optoelectronics-industry source-testing methods into the SPT-EDU system for vocational-college and university optoelectronics students. At an acceptable cost, students learn and operate methods close to industrial practice. The basic version teaches LIV and parameters such as threshold current, operating current, and operating voltage. It expands to spectra, near-field optics, far-field optics, and other key parameters. Teachers can use these experiments to prompt reflection on influencing factors and further exploration. Within specified performance limits, it also supports university research testing for multipurpose use.
-
Collimator alignment system Lamps Chinaddwy
-
M3L
Lamps
Cctc
Capacitance Range: 1.3pF~100nF Tolerance [Usually]: ±5%/±10% Tolerance [Cp≤10pF]: ±0.05/±0.1/±0.25/±0.5
Related Articles
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
Loading...
Name
Phone
Organization
Use Case
Database Platform