13 mm Travel Linear Translation Stage DML65-13RX

JCOPTIX 13 mm linear stages use precision crossed-roller guides and micrometers for high loads and precise positioning. Ground structural/mating surfaces fit guides precisely. Single-axis straightness is 3 μm, parallelism 8 μm. Dowel holes and precision vertical adapters give multiaxis XY orthogonality 10 μm and Z perpendicularity 20 μm. These are fully inspected with factory reports. Guides support 42 kg horizontally and 4 kg vertically, limited by micrometer capacity. Japanese Mitutoyo standard or differential 13 mm micrometers are offered. Standard drive moves 0.5 mm/turn with 0.01 mm (10 μm) resolution. Differential coarse drive moves 0.5 mm/turn at 0.01 mm resolution, fine drive 0.025 mm/turn at 0.0005 mm (0.5 μm) resolution. The 13 mm stage top is 65 mm × 65 mm with 21 M6 holes at 12.5 mm pitch and 2 Ø11 mm smooth access holes. Fixed plates have 2 M6 countersinks. Single X stages mount with 2 M6 screws through 2 Ø11 top access holes after centering. Single Z, two-, and three-axis stages use 4 M6 countersinks in vertical adapters/feet. Center/left/right drive positions are available as X/Z single axes or preassembled multiaxis units. Z stages DML65-13CZ/DML65-13LZ combine with XY stages DML65-13CXY/DML65-13LXY into three axes, using supplied Ø5 dowels/M6 screws for orthogonality/perpendicularity. Preassembled horizontal-lifting-platform sets and separate right-angle plates are also offered. Single-axis stages with imported standard micrometers. Models: DML65-13CX, DML65-13LX, DML65-13RX. Center/left/right drives; travel 13 mm; top 65 mm × 65 mm. Precision crossed rollers/Mitutoyo heads provide thickness 23.2 mm, travel 13 mm, horizontal load 42 kg, straightness 3 μm, parallelism 8 μm, and reading 10 μm. Tops 65 mm × 65 mm have M6 holes. Single X bases have 2 M6 countersinks for tables/breadboards. Three drive positions are available; each includes 2 M6 screws and 2 Ø5 dowels. Two-axis stages with imported standard micrometers. Models: DML65-13CXY, DML65-13LXY. Center/left drives; travel 13 mm; top 65 mm × 65 mm. XY versions include 4 M6 mounting screws. Each individual stage is 23.2 mm thick, with 13 mm travel, 42 kg horizontal/4 kg vertical load, 3 μm straightness, 8 μm parallelism, and 10 μm minimum reading. Tops 65 mm × 65 mm have M6 holes; feet have 4 M6 countersinks. Three-axis stages with imported standard micrometers. Models: DML65-13CXYZ, DML65-13LXYZ. Center/left drives; XYZ; travel 13 mm; top 65 mm × 65 mm. XYZ versions include 4 M6 screws. Each stage is 23.2 mm thick with 13 mm travel, 42 kg horizontal/4 kg vertical load, 3 μm straightness, 8 μm parallelism, and 10 μm minimum reading. Tops 65 mm × 65 mm have M6 holes; feet have 4 M6 countersinks. High-precision differential-micrometer stages. Models: DML65-13CXD, DML65-13CXYD, DML65-13CXYZD. Center drive, one/two/three axes; coarse 13 mm travel at 10 μm; fine 0.2 mm travel at 0.5 μm; tops 65 mm × 65 mm. X/XY/XYZ all use center drive, with coarse 13 mm/10 μm and fine 0.2 mm/0.5 μm. Tops 65 mm×65 mm have 21 M6 holes. XY/XYZ feet have 4 M6 countersinks; X uses M6 screws through two top smooth holes. Stages with horizontal-lift right-angle plates. Models: DML65-13CZH, DML65-13LXZH, DML65-13LXYZH. Inward plates provide compact horizontal lifting; center-drive single Z or left-drive two/three axes; travel 13 mm; imported heads; horizontal tops 65 mm × 65 mm. Inward adapters are more compact than standard assemblies and horizontally support optics/optomechanics. Options are center Z, left XZ, left XYZ. Horizontal tops 65 mm × 65 mm have 25 M6 holes at 12.5 mm pitch; 4 M6 countersinks in brackets/fixed plates mount to tables/breadboards. Separate horizontal-lift right-angle plate. Model: DML65-13-APH. Top 65 mm × 65 mm; converts vertical Z mounting faces into horizontal lifting platforms; M6 threads and M6 countersinks. 4 vertical M6 countersinks and 2 Ø5 dowel holes, with supplied 4 M6 cap screws and 2 Ø5 dowels, attach to Z stages such as DML65-13CZ, DML65-13LXZ, DML65-13CXYZ. The horizontal face can point up/down. Its 65 mm × 65 mm surface has 25 M6 holes at 12.5 mm pitch.

Save to Favorites