13 mm Travel Stainless Steel Dovetail Translation Stage DML25D-13BCXB

JCOPTIX compact stainless dovetail stages suit low-to-medium positioning accuracy and confined spaces. 303 stainless steel increases rigidity and lateral-torque capacity. Tops measure 25.4 mm × 25.4 mm; M3 × 0.25 adjusters provide up to 13 mm travel. A side M4 screw accepting a 2 mm key locks position. A top M4 hole mounts optics/accessories. Seven configurations are available. Single-axis dovetail stages. Models: DML25D-13BCX, DML25D-13BCXB. Central precision-screw drive; bottom M4 hole for Ø12.7 mm posts; top M4 hole; 25.4 mm × 25.4 mm platform; with/without base. JCOPTIX 303 stainless stages provide rigidity/lateral-torque resistance. Precision screw-driven dovetails position smoothly over full travel. The 25.4 mm × 25.4 mm top is driven by an M3 × 0.25 screw over 13 mm. A 2 mm key tightens the side M4 set screw to prevent unwanted motion. Top/bottom M4 holes provide mounting options, with maximum depths 5 mm and 3.5 mm respectively. An M4 × 10 cup-point screw is supplied for Ø12.7 mm posts. Recesses on both lower sides accept two MBB-RR clamps for table mounting. Base versions first secure with supplied M6 countersunk screws, then two clamping screws locate/hold the stage. Two-axis dovetail stages. Models: DML25D-13BCXY, DML25D-13BCYZ. Preassembled XY/YZ; top M4 hole; mounting base for more options. JCOPTIX 303 stainless construction improves rigidity/torque capacity, and screw-driven dovetails give smooth full-travel positioning. XY/YZ versions include bases secured to tables with supplied M6 countersunk screws, then two screws clamp the stage to the base. Three-axis dovetail stage. Model: DML25D-13BCXYZ. Preassembled XYZ; top M4 hole; mounting base. JCOPTIX 303 stainless construction improves rigidity/torque capacity; precision screw-driven dovetails position smoothly over full travel. Supplied M6 countersunk screws mount the included base, then two screws locate/clamp the stage. Dovetail rail-carrier stages. Models: DML25D-13BCXR075, DML25D-13BCXR150. Longitudinal coarse/fine rail adjustment; large-area rail contact for firm locking; top M4 hole; spring-release mechanism for fast removal. A preassembled single-axis stage, compact carrier, and rail provide axial coarse/fine movement. The 303 stainless stage improves rigidity/lateral-torque capacity. Spring release and large-area locking make removal quicker and locking firmer. A top M4 hole mounts optics/accessories. Standard 75 mm or 150 mm rails are available; specify other JCOPTIX lengths when ordering. Dovetail-stage mounting adapters. Models: DML25D-13BAB, DML25D-13BAP. Screw-mount DML25D-13BCX to optical tables or install two DML25D-13BCX stages orthogonally. JCOPTIX stainless-stage adapters combine DML25D-13BCX units or secure them to tables/breadboards. DML25D-13BAB bases attach with supplied M6 countersunk cap screws, then M3 bolts/wedges lock the stage. DML25D-13BAP right-angle plates join two stages perpendicularly for XZ, YZ, or XYZ configurations, secured by two supplied M4 screws.

Save to Favorites