PX-2
The PX-2 is a high-frequency short-arc xenon light source for application testing at 220-750nm, such as UV reflection and UV absorption lamps. Its short pulse cycle makes it well suited to fluorescence and phosphorescence detection. The PX-2 offers pulse rates up to 220 HZ with good pulse stability. The PX-2 pulse frequency can also be controlled through an external TIL trigger and software.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Light Source | Pulsed Xenon Lamp |
| Wavelength Range | 220-750nm |
| Pulse Power | 45 mJ/pulse (Maximum) |
| Average Output Power | 9.9 W |
| Pulse Duration | 5 μs (1/3 Pulse Height) |
| Pulse Frequency | Continuous Mode: Up to 220 Hz; Single-Shot Mode: 1–220 Hz, 220 Hz (Maximum) |
| Light Source Lifetime | 109 Pulses (Approximately 230 Days of Continuous Operation @50 Hz) |
| Trigger mode | TTL；1-220 Hz |
| Trigger Connector | SUB-D-15 pin |
| Power Dissipation | 1.3 A @ 11V @ 220 Hz 100 mA @ 12V @ 10Hz |
| Dimensions | 14 cm x 10.5 cm x 4 cm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
BIM-5003 flashing xenon lamp power supply Lamps Brolight
Operating Voltage [DC]: DC 12V/24V optional Trigger Voltage [DC]: DC 5V/0V (high/low level) Output Waveform: Square Wave
The BIM-5003 is a palm-sized portable supply developed for modular xenon flash lamps. As a driver for the SIM-6205 series pulsed xenon lamp, it supplies stable 12V/24V operating power and 5V trigger pulses at 10Hz–95Hz. The BIM-5003 primarily serves the SIM-6205 series and also supports Hamamatsu modules including L9455, L11316, L11317, L12745, L13651, and L13821.
-
BIM-6203 deuterium-tungsten lamp light source Lamps Brolight
Wavelength Range: 230-2500 nm Bulb power - Deuterium lamp: 25W Bulb power - Tungsten lamp: 20W
The BIM-6203 deuterium-tungsten source combines highly stable deuterium and tungsten lamps. Innovative filtering suppresses characteristic deuterium peaks for highly stable, smooth, continuous output over 230-2500nm. It is well suited to high-precision quantitative absorbance, concentration, and transmittance measurements. The BIM-6203's two sources switch independently through housing buttons or individual remote TTL control.
-
Light-source device teaching experiment system SPT-EDU Lamps Cotest
Ketai distilled standard optoelectronics-industry source-testing methods into the SPT-EDU system for vocational-college and university optoelectronics students. At an acceptable cost, students learn and operate methods close to industrial practice. The basic version teaches LIV and parameters such as threshold current, operating current, and operating voltage. It expands to spectra, near-field optics, far-field optics, and other key parameters. Teachers can use these experiments to prompt reflection on influencing factors and further exploration. Within specified performance limits, it also supports university research testing for multipurpose use.
-
Collimator alignment system Lamps Chinaddwy
-
M3L
Lamps
Cctc
Capacitance Range: 1.3pF~100nF Tolerance [Usually]: ±5%/±10% Tolerance [Cp≤10pF]: ±0.05/±0.1/±0.25/±0.5
Related Articles
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
CytoViva delivers comprehensive hyperspectral imaging solutions covering visible to near-infrared spectrum, compatible with brightfield, fluorescence and proprietary enhanced darkfield microscopy modes.
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
Loading...
Name
Phone
Organization
Use Case
Database Platform