X100 demodulation module
The Fiber X100 series white-light interferometric signal demodulation module is based on low-coherence white-light interferometry (WLI) and is suitable for Baiweishen Technology's Fiber S100/Fiber S200 series pressure sensors and Fiber S900 series temperature sensors. It outputs real-time cavity-length information over a serial port and is available as an open OEM module for integration. The Fiber X100C white-light interferometric Fabry-Perot cavity demodulation module (magnetic-resonance-compatible version) is also based on low-coherence white-light interferometry (WLI) and is matched to Baiweishen Technology's Fiber S100/Fiber S200 series pressure sensors and Fiber S900 series temperature sensors. Its hardware is optimized for special application requirements, with excellent magnetic interference immunity for stable operation in environments requiring magnetic immunity. It outputs real-time cavity-length information over a serial port and is available as an open OEM module for integration. The Fiber X100MiniBox series white-light interferometric signal demodulation device is based on low-coherence white-light interferometry (WLI) and is suitable for Baiweishen Technology's Fiber S100/Fiber S200 series pressure sensors and Fiber s900 series temperature sensors. Its power and signal interfaces meet medical 2xMOPP requirements, allowing seamless external integration directly with related medical equipment hosts and rapid fulfillment of medical manufacturers' optical-sensing integration needs.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| X100-Number of Channels | 1 |
| X100 - Compatibility | Fiber S100/Fiber S200 series Fabry-Perot cavity pressure sensors; Fiber S900 series temperature sensors |
| X100 - Full scale | 6000nm |
| X100-Resolution | 0.1nm |
| X100-Accuracy | ±1.5nm |
| X100 - Maximum sampling frequency | 150Hz、250Hz |
| X100 - Module dimensions | 87mm*67.5mm*27mm |
| X100 - Input power | Typical 2W, 3W |
| X100-Storage Temperature | -40℃~70℃ |
| X100-Operating Temperature | 0℃~45℃ |
| X100-Humidity [Non-Condensing] | 95%RH, non-condensing |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Y3000 demodulator Fiber Test & Measurement Bws-tech
Y3000-Operating Wavelength: C band 1550nm Y3000-Fiber Interface: FC/APC Y3000-Power Supply: 12 VDC
The Fiber Y3000 series high-speed demodulator uses interference-fringe counting and phase demodulation to resolve cavity-length changes accurately, with sampling frequencies up to 100MHz. It supports simultaneous interference using dual-wavelength laser sources, greatly improving demodulation accuracy and reliability. The low transmission loss of the 1550nm source also enables long-distance detection. The high-speed demodulator is suitable for Baiweishen Technology's Fiber S100 and Fiber S200 Fabry-Perot cavity pressure sensors and can be used for high-speed pressure monitoring.
-
Test series SWT-32EML Fiber Test & Measurement Soliware
LD drive current: max:500 mA Power Supply Voltage [Original Power Supply Column]: 1AC220 Power Supply Frequency [Original Power Supply Column]: 50/60
-
Tera2100-2 100G optoelectronic bit-error-rate tester Fiber Test & Measurement Terawan
Data Rate [Performance Parameter Table]: 9~29 Gb/s Output amplitude [Performance Parameter Table]: 200~1000 mV Output jitter (P-P) [Performance Parameter Table; PRBS31]: typical:5 Ps
The Tera2100-2 provides 10G/25G/40G/100G electrical pattern generation and error detection, plus 40G/100G QSFP+/QSFP28 module analysis, generation, and error detection. Four RF interfaces support 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development, with 4-channel precision 10G~28G testing. Tera2100-OE enables 10G/25G eye diagrams. Optical QSFP+/QSFP28 ports test 100GE QSFP28 (SR, CWDM, PSM4, LR), 40GE QSFP+ (SR, LR), and 64GFC QSFP+, with 4-channel precision 10G/14G/28G bit-error testing.
-
Tera2102 10G~100G temperature-controlled test system Fiber Test & Measurement Terawan
Temperature Range [TEC control section; Performance table]: -5~85 ℃ Power Supply [TEC control section; Performance table; TEC system is AC-powered]: typical:220 V(AC) Total Unit Power Consumption [TEC control section; Performance table]: ≤180 W
The Tera2102 is a 40G/50G/100G temperature-controlled test system with two module-test paths at different temperatures: First, 40G/50G/100G QSFP+/QSFP28; second, 10G/25G SFP+/SFP28. Each RF interface supports 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development. Tera2100-OE enables 10G/25G eye diagrams.
-
Tera2140 10G/25G/40G/100G module tester Fiber Test & Measurement Terawan
Power Supply: 5 V Module interface [SFF interfaces for two module types]: QSFP+/QSFP28、SFP+/SFP28 Number of PRBS signal channels [QSFP+/QSFP28; 10G or 25G~28Gb/s]: 4 channels
The Tera2140 tests 10G/25G/40G/100G modules through QSFP+/QSFP28 and SFP+/SFP28. It tests services/performance of 100GE QSFP28 (SR, CWDM, PSM4, LR) and 40GE QSFP+ (SR, LR), with 4-channel precision 10G/25G errors. It also tests 25GE SFP28 (SR, LR) and 10GE SFP (SR, LR), with single-channel precision 10G/25G errors.
Related Articles
The LZFL405‑80mW‑3 series from Shenzhen Leirte Optoelectronics Co., Ltd. is a coaxial‑packaged violet‑blue single‑mode fiber‑coupled laser diode. It delivers 80 mW continuous‑wave output at 405 nm. Light is coupled into 3 μm core‑diameter single‑mode fiber for clean beam quality and easy integration into diverse optical systems. It serves as a compact violet‑blue light source for medical instruments and industrial printing applications.
Wuhan Optics Valley Quantum Technology Co., Ltd. is a leading domestic developer of high‑speed semiconductor optical chips and photodetector components. Our product portfolio covers InGaAs avalanche photodiode bare dies and PIN photodetector chips designed for fiber‑optic communication
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Loading...
Name
Phone
Organization
Use Case
Database Platform