TH-M600HDRCX-BJ Multispectral Laser Tracking Night-Vision System
The housing has a spherical, low-wind-resistance design for strong-wind resistance, high precision, and good stability. It is die-cast, with an airtight, nitrogen-filled spherical chamber, and reaches an IP67 protection rating. High-performance anticorrosion paint and highly corrosion-resistant connectors enable the complete instrument to meet the requirements of C5-M, described as the highest marine anticorrosion grade. An automatic-tracking module and a precision electronic-control system are integrated.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating distance [Visible-light camera; atmospheric visibility >20km, humidity <50%RH, air temperature 15℃; for a medium-sized vessel of 300m×50m] | Detection not less than 15 |
| Operating distance [Visible-light camera; atmospheric visibility >20km, humidity <50%RH, air temperature 15℃; for a medium-sized vessel of 300m×50m] | Recognition not less than 5 |
| Camera [Visible-light camera] | 1/1.8″ sensor-format CMOS |
| Resolution [Visible-light camera] | 1920x1080, 200 × ten thousand pixels |
| Illuminance (source label: zhaojing) [Visible-light camera] | Color 0.02Lux group (F1.2,AGCON), black 0.002Lux group (F1.2,AGC ON) |
| Lens [Visible-light camera] | 6~320m fog-penetrating HD lens, motorized signal change, manual/automatic convergence, electronic image stabilization (literal source wording) |
| Video standard [Visible-light camera] | H.264 |
| Image enhancement [Visible-light camera] | Supports wide dynamic range, backlight compensation, automatic gain, digital noise reduction, automatic white balance, and other functions |
| Defogging [Visible-light camera] | Supports both optical and electronic defogging |
| Detector [Thermal imaging detector and lens] | Oxide labelled fan (wx), uncooled focal plane |
| Operating distance [Thermal imaging detector and lens; For a medium-sized vessel 20m×5m] | Detection not less than 4 |
| Operating distance [Thermal imaging detector and lens; For a medium-sized vessel 20m×5m] | Recognition not less than 2 |
| Resolution [Thermal imaging detector and lens] | 640x512 |
| Sensing band [Thermal imaging detector and lens; Long-wave infrared] | 8~14 μm |
| Lens [Thermal imaging detector and lens] | Aperture (108mm), continuous zoom 22.5mm-90m, F0.85 |
| NETD [Thermal imaging detector and lens; Original condition @25°F1.0; no ℃ supplied from neighboring models] | ≤40 mk |
| Video standard [Thermal imaging detector and lens] | H.264/H.265 |
| Lens control [Thermal imaging detector and lens] | Motorized zoom, manual/automatic focusing |
| Correction [Thermal imaging detector and lens] | Automatic/manual/background correction |
| Polarity [Thermal imaging detector and lens] | Black hot/white hot and 16 pseudocolor images |
| Image processing [Thermal imaging detector and lens] | SDE digital image-enhancement technology |
| Parameter adjustment [Thermal imaging detector and lens] | Brightness, contrast, automatic AGC control |
| Operating Temperature [Environmental Adaptability] | -40~+60 ℃ |
| Storage Temperature [Environmental Adaptability] | -45~+80 ℃ |
| Humidity [Environmental Adaptability] | <95 %RH |
| Surge protection [Environmental Adaptability] | Power supply 4000v, communication/video signals 2000V |
| Wind resistance [Environmental Adaptability] | Operating wind level 8, safety wind level 12 |
| Salt-spray resistance [Environmental Adaptability] | At PH 6.5~7.2, no surface change after 1000 hours of continuous spraying |
| Hot-spot alarm | Supported |
| Health management | Supports recording and querying camera-core health indicators: detector temperature, ambient temperature, extreme temperature, cumulative operating time, and power on/off and shutter counts |
| Intense heat-source protection | Supported |
| Laser Type [Original second thermal-target observation-distance region (including the laser-ranging field)] | Semiconductor laser |
| Laser Wavelength [Original second thermal-target observation-distance region (including the laser-ranging field); Optional] | 1535 nm |
| Ranging distance [Original second thermal-target observation-distance region (including the laser-ranging field)] | 5 kilometers |
| Rangefinding Capability [Original second thermal-target observation-distance region (including the laser-ranging field); 2.3m×4.6m target board or equivalent target; Visibility 10Km, relative humidity 60%, reflectance coefficient 0.3] | ≥5000 m |
| Rangefinding Dead Zone [Original second thermal-target observation-distance region (including the laser-ranging field)] | ≤50 m |
| Ranging Accuracy [Original second thermal-target observation-distance region (including the laser-ranging field)] | ≤±1 |
| Ranging Frequency [Original second thermal-target observation-distance region (including the laser-ranging field)] | Single shot, 1Hz, 5Hz, 10Hz |
| Correct-measurement rate [Original second thermal-target observation-distance region (including the laser-ranging field)] | ≥98 % |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Post-Evaporation Inspection System
Semiconductor Manufacturing Equipment
Lic-vision
-
Lithography System
Semiconductor Manufacturing Equipment
Trusee
-
Resist Stripping System
Semiconductor Manufacturing Equipment
Trusee
-
Developing System
Semiconductor Manufacturing Equipment
Trusee
-
Image Recognition and Tracking Board
Semiconductor Manufacturing Equipment
Tera-aurora
Main Processor [FPGA]: Fudan Micro 7K325t Main Processor [ARM]: HiSilicon 3403 Storage [FPGA]: 32G EMMC, 64G SD Card
Image Recognition and Tracking Board
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
A solid-state laser is one of the most common and reliable laser types used in modern industry, medical equipment, and scientific research. Unlike gas or fiber lasers, it uses solid materials as its gain medium to generate stable, high-brightness laser beams. Thanks to its high precision, long lifespan, and compact structure, solid-state lasers have become a mainstream solution for high-precision laser processing and optical systems.
Driven by worldwide energy‑structure transformation, the lithium‑ion battery industry is expanding rapidly as green, high‑efficiency energy‑storage devices gain surging global market demand. With years‑long dedication to intelligent manufacturing, Han’s Laser Lithium‑battery Intelligent Equipment has accumulated solid R&D strength and rich practical experience. By integrating multiple cutting‑edge technologies, the company delivers high‑efficiency, eco‑friendly and sustainable lithium‑ion battery production lines, bringing revolutionary upgrades to the new‑energy battery sector.
Loading...
Name
Phone
Organization
Use Case
Database Platform