405nm200mW CTS Laser Module LY4035A-32-CTS
The CTS laser module provides efficient screen printing platemaking across different industries. Strong laser penetration supports three dimensional thick plates. In vertical laser exposure equipment, 32 parallel drive channels greatly improve machine speed, with convenient, rapid connection. Mechanical dimensions are given in mm.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| working Voltage Vf | min:5.5 V; typical:6 V; max:6.5 V |
| working Current Iop | typical:10 A; max:12 A |
| laser Power Po [Per Channel; 32 Channels Driven in Parallel] | min:200 mW; typical:220 mW; max:260 mW |
| Central Wavelength λp | min:402 nm; typical:405 nm; max:408 nm |
| spot Size Fs | typical:30 μm × 60 μm |
| Focal Length F | typical:40 mm |
| Focal Point Spacing Ss | typical:7.5 mm |
| Electrostatic Discharge Vesd | typical:1000 V; max:2000 V |
| humidity RH [50%–70%RH Noncondensing] | typical:55 %RH; max:70 %RH |
| ambient Temperature Ta | min:10 ℃; typical:25 ℃; max:30 ℃ |
| Storage Temperature Tstg | min:-30 ℃; typical:25 ℃; max:70 ℃ |
| working frequency FS [Maximum Operating Frequency Tested in Single Channel Operation; duty cycle 50%; Frequency Above 300kHz Causes the Laser Current to Increase] | min:0 KHz; typical:100 KHz; max:1000 KHz |
| modulation Signal PWM/TTL | min:1.5 V; typical:3.3 V; max:5 V |
| Rising Edge Delay RE | min:200 ns; typical:300 ns; max:400 ns |
| Falling Edge Delay FE | min:100 ns; typical:220 ns; max:300 ns |
| Hot Start Delay HRE | min:15 μs; typical:20 μs; max:45 μs |
| Operating Environment Humidity [Noncondensing Conditions] | 50–70 %RH |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
STO-LDa-3 Seed Laser / Optical Pulse Assembly Laser Modules & Systems Sinteclaser
Pulse Width Range: 0.5ns- 3ns Peak Laser Current [@PW=3ns;24V;Can Be Increased on Request]: 2A (@PW=3ns) Bias Current [Can Be Increased to 100mA on Request]: 0 - 50mA
Continuously tunable pulse width:0.5ns-3ns. The STO-LDa-3 seed-laser assembly is an integrated solution for the seed-source (oscillator) section of pulsed MOPA fiber lasers. It includes an adjustable pulse-width generator, laser power supply, TEC controller, and integrated laser diode. Each rising-edge input trigger produces one pulse. Width is adjustable from0.5ns to above3ns; an onboard trigger generator is optional. Analog inputs control pulse width, bias current, and set temperature, with amplitude control also optional. Each analog input can be replaced by an onboard potentiometer for external control or internal settings. Bias-current adjustment affects spectral width or extinction ratio. Wide-temperature, maintenance-free operation suits commercial and industrial integration. Compatible diodes for STO-LDa-3 include DFB, FP, and FBG types at1030nm,1064nm,1310nm,1480nm,1550nm, or custom wavelengths, in industrial butterfly or coaxial packages. Trigger Input |TTL/LVTTL, Rising Edge, High Impedance; Mounting |Vertical or Horizontal; Main Connector |Samtec TFM-120 Series,40 pin. Configuration table: Model |Power |Mounting |TEC Controller |Trigger Generator |Potentiometer |Laser Diode. STO-LDa-3 |5/5V(5) or5/12V(12) or5/24V(24) |Horizontal(H)/Vertical(V) |Yes(T)/No(X) |Yes(G)/No(X) |Yes(P)/No(X) |Remarks. STO-LDa-3 product-code example:24V power, vertical mounting, TEC controller, no trigger generator or potentiometer,1064 DFB diode:STO-LDa-3-24-V-T-X-X-1064DFB. STO-LDa-3 |24 V(24) |Vertical(V) |Yes(T) |No(X) |No(X) |1064 DFB Laser Diode.
-
Powell Laser Line Module Laser Modules & Systems Optowide
-
Mid/Far-Infrared Frequency Converter Laser Modules & Systems Spectra-line
Spectral Tuning Range: min:4.5μm; max:16μm Power Stability [8μm band; within 4 hours; rms]: typical:rms＜2% within 4 hours in the 8μm band Central Wavelength Variation: typical:0.01%
The mid/far-infrared frequency converter extends the tunable frequency converter's range to16 µm. It provides tens of milliwatts average power between5 and10 µm and still delivers a few milliwatts at15 µm. Module pumping provides near-transform-limited pulses while retaining the pump source's excellent wavelength and power stability. It is specifically designed to avoid beam-pointing problems during wavelength tuning. Fully enclosed, it can be purged with dry air or nitrogen to reduce atmospheric absorption. The basic version is manually operated and includes a calibrated wavelength table. Automated versions or specially designed MIR modules are available on request.
-
Near-Infrared Frequency Converter Laser Modules & Systems Spectra-line
Wavelength Range: min:920nm; max:980nm Conversion Efficiency: min:30%; max:50% Average Power: min:300mW; max:800mW
High output power, beam quality, and near-transform-limited pulses from Stuttgart Instruments make these sources ideal frequency-conversion pumps. Alpha-HP's broad tuning, stability, and automation enable a compact second-harmonic module for NIR signal wavelengths. Output of hundreds of milliwatts is attainable over the 720-980 nm Ti:Sapphire range. The VIS module provides fast, repeatable spectral tuning with stable pointing and can also operate with Alpha or a custom system. Narrow-linewidth/picosecond options are available.
-
Light Source for Coherent Raman Microscopic Imaging Laser Modules & Systems Spectra-line
Tuning Range [Pump]: min:750nm; max:950nm Tuning Range [Stokes]: typical:1043nm Tuning Range [NIR]: min:1.4μm; max:2μm
Alpha-SRS is an ultralow-noise, fully automatic laser system for coherent Raman-scattering microscopy. Solid-state femtosecond technology achieves the shot-noise limit above 1 MHz modulation frequency. Tunable 750-950 nm and 1.4-2.0μm outputs plus a fixed 1043 nm beam support coherent Raman microscopy over 1015-3695cm -1 and multiphoton excitation microscopy. Custom pulse durations from 100 femtoseconds to picoseconds allow efficient excitation and spectral resolution down to 13cm -1. All three outputs are intrinsically synchronized;Stokes and pump beams overlap spatially and temporally with precisely adjustable delay. For SRS-microscopy, the pump has external modulation with 100% depth.
Related Articles
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform