Lidar Scanning Galvanometer
Laser Galvanometer Scanner Introduction ： Laser Galvanometer Scanner It's simple. is Use it on Laser A scan of the industry. Galvanometer Scanner ， It's called a high-speed scan. Galvanometer Scanner Galvo scanning system。 So-called Galvanometer Scanner ， It could be called a current meter. ， It's designed in a way that follows the current meter. ， Optical Element Replaced the compass. ， The probe's signal is controlled by computers. -5V-5V or -10V-+10V ..and replaces the current signal. ， To complete the scheduled action 。 Same as the mirror scanning system. ， This one. Typical The control system uses a pair of mirrors. ， Different. is ， Drive This one. Optical Element It's... Stepper Motor Replaced by server ， In the system. ， The accuracy of the system is further ensured by the use of position sensors and the design of negative feedback loops ， Scan speed and speed of the system Repeatability A new level is reached. 。 Scan Laser System None Comment is For embroidery 、 Sculpt ， And... is For micro-clinical drilling ， They all depend on it. Galvanometer Scanner To locate exactly. Laser Beams 。 We use it. Mirror Class Silicon Substrate Manufacture of a specification-compliant current meter Mirror 。 We're here. Substrate It's covered with a thin film. ， To create efficient current meters. Mirror ， The latter can reflect. Wavelength Scope 1.0 to 12.0 µm Between Laser 。 Galvanometer Scanner Scan the composition principle. ： Galvanometer Scanner Scanner header is mainly used to mark XY Scanner 、 Field Lens 、 Galvanometer Scanner and computer-controlled marking software, etc. 。 Based on Laser Wavelength Different selections for the respective optical devices 。 And the other options are: Laser Beam Expander 、 Laser Wait. 。 The working principles is Will Laser Beam in to two. Mirror ( Scanner ) Go, go, go! ， Computer control. Mirror Reflect angle ， These two. Mirror I can go along separately. X、Y Axis scan ， And so, you can reach it. Laser The rotation of the beam ， It's a certain power density. Laser Focus on marking. Material Let's move on as we need. ， And so Material It leaves a permanent mark on the surface. ， The focus light can be is Circle or rectangle 。 is. Galvanometer Scanner Scan System ， Vector graphics and text ， This method uses the graphics software treatment of the graphics in the computer. ， Efficiently utilised ， The graphic is fine. ， None Characteristics of deceptiveity ， It's a huge increase. Laser Quality and speed of marking 。 Meanwhile... Galvanometer Scanner Type-marking can also be done in a point-format manner ， This is the way it works for online marking. ， A scan can be used for the production line at different speeds. Galvanometer Scanner Or two scans. Galvanometer Scanner ， Compared to the array markings described above ， Can mark more dots info ， More advantage for tag characters 。 Galvanometer Scanner Scanner-based marking because of its wide application ， May perform vector and dot-form markings ， Tag Range Adjustable ， And it's fast. 、 High-speed bid. ( Hundreds of characters per second )、 It's a good quality. 、 The light-circuit seals are working. 、 Environmental adaptation has become a dominant product ， And it's considered to represent the future. Laser Pointing directions ， There's a great scope for application. 。 Product Actual ：
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material | K9 Glass 、 Melt Quartz 、 Monjing Silicon |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Laser Tube Mount Semiconductor Laser Accessories Spectra-line
Mount specifications: TO60 Current control interface: DB9 male socket Temperature control interface: DB9 female socket
The Mount laser diode mount is designed for high-precision laser diode drivers to provide a complete drive solution. Its internal temperature-control and current-drive interfaces are independent for different application scenarios.
-
Controllers and GUI for STO-LD Series Modules STO-CSW-64 Semiconductor Laser Accessories Sinteclaser
Our controller/GUI is compatible with all STO-LD series modules and can be used with any STO-LD module. Key features: together, the STO-LD module and controller/GUI provide a powerful, easy-to-use solution without manually handling calibration or analog signal control. GUI software controls all STO-LD module functions and displays status and monitoring data, including dozens of presets for pulse width, frequency, bias current, peak current and LD temperature. The GUI also saves and recalls waveforms. Dedicated safety functions include interlock input, key input and one-touch rapid GUI shutdown. Connecting the controller to the STO-LD board creates a board approximately 7X10 cm. Alternatively, the boards can be connected by cable or stacked as a 70mm x 60mm sandwich. Control panel and ordering information: STO-CSW-64 controller/software for STO-LDa-64; STO-CSW-256 controller/software for STO-LDa-256; STO-CSW-1250 controller/switch for STO-LDa-1250; STO-CSW-3 controller/software for STO-LDa-3 and STO-LDa-gs.
-
Controllers and GUI for STO-LD Series Modules STO-CSW-256 Semiconductor Laser Accessories Sinteclaser
Our controller/GUI is compatible with all STO-LD series modules and can be used with any STO-LD module. Key features: together, the STO-LD module and controller/GUI provide a powerful, easy-to-use solution without manually handling calibration or analog signal control. GUI software controls all STO-LD module functions and displays status and monitoring data, including dozens of presets for pulse width, frequency, bias current, peak current and LD temperature. The GUI also saves and recalls waveforms. Dedicated safety functions include interlock input, key input and one-touch rapid GUI shutdown. Connecting the controller to the STO-LD board creates a board approximately 7X10 cm. Alternatively, the boards can be connected by cable or stacked as a 70mm x 60mm sandwich. Control panel and ordering information: STO-CSW-64 controller/software for STO-LDa-64; STO-CSW-256 controller/software for STO-LDa-256; STO-CSW-1250 controller/switch for STO-LDa-1250; STO-CSW-3 controller/software for STO-LDa-3 and STO-LDa-gs.
-
Controllers and GUI for STO-LD Series Modules STO-CSW-1250 Semiconductor Laser Accessories Sinteclaser
Our controller/GUI is compatible with all STO-LD series modules and can be used with any STO-LD module. Key features: together, the STO-LD module and controller/GUI provide a powerful, easy-to-use solution without manually handling calibration or analog signal control. GUI software controls all STO-LD module functions and displays status and monitoring data, including dozens of presets for pulse width, frequency, bias current, peak current and LD temperature. The GUI also saves and recalls waveforms. Dedicated safety functions include interlock input, key input and one-touch rapid GUI shutdown. Connecting the controller to the STO-LD board creates a board approximately 7X10 cm. Alternatively, the boards can be connected by cable or stacked as a 70mm x 60mm sandwich. Control panel and ordering information: STO-CSW-64 controller/software for STO-LDa-64; STO-CSW-256 controller/software for STO-LDa-256; STO-CSW-1250 controller/switch for STO-LDa-1250; STO-CSW-3 controller/software for STO-LDa-3 and STO-LDa-gs.
-
Controllers and GUI for STO-LD Series Modules STO-CSW-3 Semiconductor Laser Accessories Sinteclaser
Our controller/GUI is compatible with all STO-LD series modules and can be used with any STO-LD module. Key features: together, the STO-LD module and controller/GUI provide a powerful, easy-to-use solution without manually handling calibration or analog signal control. GUI software controls all STO-LD module functions and displays status and monitoring data, including dozens of presets for pulse width, frequency, bias current, peak current and LD temperature. The GUI also saves and recalls waveforms. Dedicated safety functions include interlock input, key input and one-touch rapid GUI shutdown. Connecting the controller to the STO-LD board creates a board approximately 7X10 cm. Alternatively, the boards can be connected by cable or stacked as a 70mm x 60mm sandwich. Control panel and ordering information: STO-CSW-64 controller/software for STO-LDa-64; STO-CSW-256 controller/software for STO-LDa-256; STO-CSW-1250 controller/switch for STO-LDa-1250; STO-CSW-3 controller/software for STO-LDa-3 and STO-LDa-gs.
Related Articles
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform