Embedded ECC-1C Controller
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Dimensions | 27 mm × 20 mm × 5 mm |
| Weight | 5 g |
| Connectors | Hirose HR106-7R-6SB(73) |
| Maximum USB Cable extension length | 5 m |
| Maximum Lens Cable Length (USB Turn UART) | 1 m |
| Power Supply Pressure range | 5 / 9-24 VDC ( Portability ± 5%) |
| Absolutely. Maximum Power Supply Electricity | 26 VDC |
| Marked as current control | -300 Present. 300 mA |
| Electron current step | 80 µA |
| Repetitivity of currents | ± 1 mA |
| Maximum Power Dissipation (5V / 9-24V) | 1.5 / 2.5 W |
| Simulate voltage input level | 0-10 V |
| Absolutely. Maximum Simulate voltage Input | 11 V |
| Simulate input resolution | 12 bit |
| Simulate input resistance | >70 KΩ |
| Numbers Interface | GPIO, UART, I2C |
| Digital signal logical level | 3.3 V |
| UART Simple mode command delayed | 310 µS |
| I2C Command Delay | Maximum 100 µS |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
RD-100S
Controllers & Metrology
Raiven
Channel [Channel Switching]: ×4 Channels (Channel Switching) Drive Output Voltage: 100V(MAX)
Open-Loop Piezo-Screw Controller,Channel Switching Controls Four Screws,Custom Channel Count,24VDC/1.5A,Fan Cooling Quickly Removes Heat.
-
MC Motion Control Board E-MC
Controllers & Metrology
Raiven
E-MC is a high-performance industrial main control board based on the standard 6U VME architecture. It uses high-performance multicore DSP and ZYNQ main processors and communicates with laser-interferometer axis cards through the P2bus bus. Suitable for large-scale real-time signal processing and multicore parallel processing, it has been used in nanometer-level motion control for step-and-scan lithography. Applications include projection step-and-scan lithography, electron-beam lithography, electron-beam inspection and nanoimprinting.
-
SEC600 Motion Controller
Controllers & Metrology
Raiven
Grating Sensor Data Interface: 4 ABZ Channels, RS422, Rate Supports 30MHz; Optional Endat/BissC Data Storage: Supports 5K Data Sampling and 10s Storage, Simultaneously Stores 20 Single-Precision Floating-Point Variables Gigabit Ethernet: 1 Channel, RJ45 Interface, Modbus-TCP Supported
The SEC600 motion controller is a high-performance signal-processing board using an ARM+FPGA ZYNQ main controller. It offers displacement-sensor acquisition, analog acquisition/output, digital I/O and high-speed communication. Optional hardware-in-the-loop simulation combines with MATLAB/Simulink for rapid control prototyping (RCP). It has been used for semiconductor-equipment motion control and maglev/voice-coil active vibration isolation. The host Demo communicates with the board over Ethernet.
-
PPC Single-Board Computer Board E-PPC
Controllers & Metrology
Raiven
Processor: One Freescale QorIQ P2020,1.2GHz,512KB L2,3 PCIE Controllers,Dual-Core Concurrent/SMP Main Memory: DDR3 SDRAM, 64bit 100MHz, 2GB, w/ECC Flash Storage: 2 x32MB SPI Flash, 32bit, with boot Backup
E-PPC High-Performance Standard6U VME Controller,One NXP QorIQ P2020 up to1.2GHz,Hardware Requirements Compatible with MVME2500.
-
GMC Control Card
Controllers & Metrology
Scanneroptics
Drawing on years of technical experience, 思特光学 developed the GMC controller with high accuracy/resolution, powerful functions and easy integration. Galvanometer/laser synchronization and linked control of galvanometers with an external precision motion stage (four-axis coordinated motion) help tackle challenging tasks. High-accuracy correction ensures positioning in large-format processing. C#/C++ secondary-development libraries support various 32/64-bit Windows systems for flexible host-software development. User-friendly ScanWorld laser-processing software is easy to learn/use, parses STEP, IGES and STL 3D formats, supports creating/editing/slicing 3D graphics, and offers 3D surface marking and relief engraving.
Related Articles
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
Developed by RealLight (Beijing), the R7M high‑power diode laser module belongs to the AW multi‑functional laser product family.
GYOPTICS 30 W collimated isolator is a highly‑reliable passive optical component optimized for 1064 nm high‑power laser systems. Characterized by low insertion loss and superior backward‑light suppression capability, it effectively blocks reflected light traveling back toward the laser resonator, eliminating back‑reflection‑induced instability and protecting fiber or solid‑state laser sources during long‑term operation.
Santec introduces the HSL‑20‑C‑E swept laser. Built on proprietary MEMS technology, this compact integrated light source combines high‑speed scanning and long coherence length, optimized for SS‑OCT imaging systems. Configurable start trigger and k‑clock outputs are available to meet development requirements for medical‑biological imaging and industrial non‑destructive inspection equipment.
Loading...
Name
Phone
Organization
Use Case
Database Platform