SMART Series Fiber Optic Single Color Pyrometer SMART- FS-7030
SMART-F Series Single Color Pyrometer is A high performance. 、 Smart. Single Color Infrared Pyrometer 。 It's by Lens 、 Optical Fiber 、 Process Widget Composition 。 Optical Fiber and Lens The components are sustainable. 250℃ High temperature ， No need for another cooling. 。 It has a strong shape. ， Adopt Stainless Steel Lens ( Brushing function )， Aluminium pressure casts the shell. ， The protection level is... IP65。 It uses manual Adjustable Focus Lens ， Achromatic Group Lens ， High-reliability circuit design ( It's cold. 、 Design scheme for full digitized measurements 、 High integration SOC Chip Application 、 Visualize OLED Operating Interface ) and software design ( Compensation for ambient temperature 、 Real time signal processing 、 Processing of abnormal signals 、 Continuous optimization of environmental software codes )。 These are special designs. ， Makes SMART-F Series Single Color Pyrometer Use needs for various stringent industrial sites and precise temperature control can be met 。 SMART-F Series Single Color Pyrometer The temperature of the object is determined by the and of the radiation energy of the narrow band from which the object is received 。 It uses advanced softness. 、 Hardware design ， It's got a huge width. Dynamic Scope ， Higher stability 。 It's widely used in the metallurgical industry. ( Wiresticks 、 Hot roller. 、 - The exercise. ) And the exercise industry. ， Thermal treatment ， Sensor heat. ， Monjing Silicon And Polytechnic. Silicon And wait for temperature measurements in all industrial settings. 。 Except for temperature measurements applicable to general industrial settings. , Also applicable in situations where electromagnetic interference is high and ambient temperatures are high 。
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Temperature range | 700～3000 ℃ |
| Operating Wavelength | （0.85～1.1）μm |
| Detector | Si（ Silicon Photocell ） |
| Distance factor | 200:1 |
| Measuring Distance | Adjustable Focal Length 0.15m to None Far away. Adjustable |
| Measuring precision [T To read temperature] | ±0.5%T（T To read temperature ）， More High Precision It's... Customizable |
| Temperature Resolution | 0.1℃ |
| Repeatability | ±2℃ |
| Monochrome coefficient | 0.100～1.000， Step Distance 0.001 Adjustable |
| Response Time | 5ms～99s Adjustable ， Faster. Customizable |
| Signal processing | Peak 、 Valley 、 Average ， The temperature is too high to be called to the police. ， Power loss, protection, etc. |
| Output | First set of multiple simulation output （4mA～20mA，0mA～20mA，0V～5V，0V～10V Switchable ）， Output Resolution 16bit， Accurate to 0.1℃， Electro-ring output Maximum Load 600Ω， The voltage output allows currents. 10mA Second group simulation 12bit Output 4mA～20mA， Resolution 1℃， Electro-ring output Maximum Load 600Ω Call Output ： Upper limit 、 Lower limit to call the police. ， Use of optical relays for life None Limits ， On Resistance ≤2Ω， Maximum Allowed voltage AC42V or DC60V， Maximum Allow currents 120mA， Response Time 2ms PNP Level Output （ Output Current 100mA， With Load Protection ） RS485 Output ， Realizable Parameter Changes ， Data recording and query functions |
| Show by | Adopt spontaneous light industry class OLED Display |
| Electricity Power Supply | DC（20～30）V， Power Dissipation ：5W（24V@200mA）， - It's under pressure. 、 Overflow 、 Short-circuit protection ， Internal EMI Filter 、 Resistable 2500VDC Pulse The crowd's jamming. 。 |
| Environmental temperature compensation | Internal 40℃ Heat Heat Heat ， Full temperature reimbursement ， Temperature accuracy is almost uninacted by ambient temperature. 。 |
| Aim mode | Inline Red Laser Aim! |
| Use Environment | Temperator ： No, I don't. Water Cooled -20℃～+60℃， - Yeah. Water Cooled ；-20℃～+200℃， Lens and Optical Fiber ：-20℃～+250℃ |
| Ingress Protection Rating | IP54 |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
ZTOF-4424-10A-Z45 Sensors Zgy-led
Dimensions: 4.4 mm × 2.4 mm × 1.0 mm Detection distance: 2cm~5m Detection Accuracy [Indoors]: ±3%
The ZTOF-4424-10A-Z45 is a highly integrated, compact single-point dTOF (direct Time of Flight) sensor. It integrates a VCSEL emitter, single-photon avalanche diode (SPAD) array, microlenses, TDC (Time Digital Converter), and MCU. dTOF technology and built-in sunlight-rejection and cover-contamination algorithms maintain measurement accuracy independently of target reflectance in varied environments, enabling precise ranging up to5m. The ZTOF-4424-10A-Z45 supports firmware updates through IIC, with modes and algorithms customizable to customer needs. An eye-safety control circuit meets Class I requirements. 1.Product Dimensions:the ZTOF-4424-10A-Z45 uses a12-pin LGA package measuring4.4mm (±0.05mm) x2.4mm (±0.05mm) x1.0mm (±0.075mm); unspecified tolerance is±0.05mm. 2.PCB Pad Dimensions:Figure11, PCB pads, top view. 3.Application Circuit:ZTOF-4424-10A-Z45 block diagram. Notes:1.The external AVDD capacitor should be as close as possible to the AVDDVCSEL and AVSSVCSEL pins. 2.HOST must always drive XSHUT; use a pull-up if host state is unknown. XSHUT requires HW standby mode without IIC communication. Soldering and Storage:1.Soldering Requirements:recommended reflow peak240ºC~260ºC, never exceeding260ºC. The source references a lead-free SMT profile and parameters:Figure13,recommended reflow profile;Table13,recommended oven-temperature test controls. Notes:1.Temperatures are measured at the package top. 2.Maximum reflow cycles:three. 2.Storage Instructions:ZTOF-4424-10A-Z45 is supplied in sealed moisture-barrier bags, with moisture sensitivity level3 (MSL3). Moisture absorbed during packaging can be released and evaporated during soldering, adversely affecting optical characteristics. Each device is baked before dry packing to minimize moisture. Sealed aluminized bags protect against ambient humidity during shipping and storage. Shelf Life:an unopened bag provides12 months from its marked date under the stated conditions:Shelf Life12 months;Ambient Temperature<40℃;Relative Humidity<90%. Beyond12 months, or if the humidity indicator shows excessive storage humidity, rebake the device. Floor Life:ZTOF-4424-10A-Z45 has MSL3 sensitivity, giving168 hours from bag opening under these conditions:Floor Life168 hours;Ambient Temperature<30℃;Relative Humidity<60%. Exceeding floor life or these conditions requires rebaking before reflow or dry packing. Baking:125±5℃ for8 hours;do not bake directly in carrier tape;avoid excessive vibration or impact that could seriously deform or damage packaging. IIC Communication:device address0x41, or0x82 when adding a1bit read/write bit to form8bit;maximum transfer speed1Mbits/s.
-
T05603 Z0S-T05603N-Z2 Sensors Zgy-led
Maximum Power Power Dissipation Pd [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 75 mW Maximum Reverse Voltage VR [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 6 V Maximum Continuous Forward Current IF [Absolute Maximum Ratings; Ta=25℃; Input Emitter]: 50 mA
The ZOS-T05603N-Z2 is a compact dual-channel transmissive photo-interrupter combining a high-output GaAsIrED with high-sensitivity dual phototransistors. Its emitter and detector form a transmissive optical circuit interrupter for non-contact sensing.
-
ZCS-2016C ZCS-2016C-08D-Z4 Sensors Zgy-led
Power-Supply Voltage VDD [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：3.6 Voltage Input Input Voltage Vin [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD Output Voltage Vout [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD
The ZCS-2016C-08D-Z4 performs color-temperature measurement and brightness sensing. An internal state machine places it in a low-power state between color-temperature measurements for very low average power consumption. Pin Configuration and Functions. Product Specifications. Electrical Characteristics (VDD=3V, Ta=25℃). Optical Characteristics (VDD=3V, Ta=25℃).
-
ZCS-2020C ZCS-2020C-07D-Z4-1 Sensors Zgy-led
Power-Supply Voltage VDD [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：3.6 Voltage Input Input Voltage Vin [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD Output Voltage Vout [Absolute Maximum Ratings;All Voltage Values Are Relative to VSS]: min ：-0.5； max ：VDD
The ZCS-2020C-07D-Z4 - 1 device performs color-temperature measurement and brightness sensing. An internal state machine can place the device in a low-power state between color-temperature measurements, providing very low average power consumption.
-
Zero-Field Atomic Magnetometer QZFM Gen-3 Sensors Spectra-line
Magnetic-Field Sensitivity [Dual-Axis Version; 3-100 Hz Band]: <15 fT/√Hz,3-100 Hz Band (Typical7-10 fT/√Hz) Magnetic-Field Sensitivity [Triaxial Version; 3-100 Hz Band]: <23 fT/√Hz,3-100 Hz Band (Typical15 fT/√Hz, All Three Axes Simultaneously) Dynamic Range: ±5 nT
The source announces the release of QUSPIN's third-generation QZFM sensor Gen-3, completing the final stage of its three-step development of mature zero-field OPM technology. Gen-1(2016) was a proof-of-principle prototype. Gen-2(2019) prioritized user comfort and miniaturization for dense multichannel imaging. Gen-3(2021) resolved the preceding generations' issues and integrated the technology into a powerful platform for practical problems. Gen-3 includes several upgrades, but prioritizes a robust, reliable sensor for future biomagnetic imaging systems.
Related Articles
Shandong Optochip specializes in independent R&D of industrial-grade optical chips for optical communication and fiber sensing. Our business includes overseas chip tape-out, domestic precision device packaging
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Semiconductor laser diodes are essential light sources for industrial sensing, LiDAR and laser printing. Many engineers waste time picking mismatched models. We summarize 4 simple selection standards, plus a mature industrial product: HGLD-790TO5.6-ZSP-10mW from HAUCORE.
Driven by fast‑growing demands of 3D perception, biometric authentication and machine‑vision industries, near‑infrared imaging optics have become a vital hardware component for intelligent sensing systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform